Services
Service Areas
Pre-Appointment Checklist: Preparing Dodge Ram 2500 Regular Cab for Mobile Windshield Replacement
Confirm Appointment Details: VIN, Photos, and Dodge Ram 2500 Regular Cab Options to Verify
A smooth Dodge Ram 2500 Regular Cab mobile windshield replacement starts with quick verification so we can bring the right glass and hardware. Send the VIN (Vehicle Identification Number) to confirm your exact year and trim and to identify features that affect fitment, including a rain/light sensor pad, ADAS camera bracket, heated elements, acoustic laminate, a heads-up display (HUD) cutout, or uncommon molding styles. Next, share three photos: a full outside view of the windshield, a close-up of the damage, and an interior shot of the mirror and upper dash where cameras and sensors mount. With this information, we can select the proper windshield, plan for clips or moldings, and keep the technician on schedule. Decide on glass type as well. OEM windshield glass is best when you want the closest factory match for tint and technology, while premium aftermarket windshield replacement glass can be budget-friendly when it meets safety standards. If you plan to use insurance, have your claim number ready (or policy details) and verify comprehensive coverage. Finally, confirm the service address, a reliable day-of phone number, and where the Dodge Ram 2500 Regular Cab will be parked so your on-site windshield replacement is completed efficiently, supported by Bang AutoGlass' lifetime workmanship warranty.
Choose the Right Mobile Service Location: Parking Space, Weather, and Access
The location you choose can make your Dodge Ram 2500 Regular Cab mobile windshield replacement faster and help protect install quality. Pick a flat, stable surface with enough clearance to open doors, lift wipers, remove cowl trim, and safely maneuver the new glass—an open driveway, a garage bay, or a quiet parking-lot corner works well. Avoid cramped decks, bumper-to-bumper stalls, or busy curbside spots with heavy foot traffic, since we need close access to the windshield perimeter and tooling space. Good lighting and a clean work area reduce the risk of debris contaminating the bond line. Weather also matters: urethane adhesive performance and bond cleanliness are influenced by temperature, humidity, rain, snow, and wind-driven dust. If conditions are wet, gusty, or below comfortable working temperatures, a covered area is best, or we can adjust scheduling to keep the install clean. You do not need outlets or shop equipment; we arrive fully mobile with the tools and materials required. Plan for the full window: most swaps take about 30-45 minutes, plus a recommended minimum of one hour of safe drive-away time. With the right setup, your Dodge Ram 2500 Regular Cab windshield replacement remains protected under Bang AutoGlass' lifetime workmanship warranty.
Clear the Work Area: Remove Personal Items, Toll Tags, Dash Cameras, and Valuables
A quick interior reset helps your Dodge Ram 2500 Regular Cab auto glass replacement go faster and reduces the chance of lost or damaged items. Clear the dashboard, center console, and front seats so we can work around the A-pillars, mirror mount, and camera/sensor area without obstruction. Remove loose items and valuables such as wallets, cash, laptops, keys, garage remotes, and tools. Take down windshield-mounted accessories including dash cams, phone mounts, GPS units, radar detectors, permits, and stickers near the sensor zone. If a dash cam is hardwired or uses parking mode, power it down to prevent alerts while trim is handled. Remember toll tags (E-ZPass, SunPass, FasTrak, and similar). Because adhesive brackets often cannot be reused on new glass, plan to remount with fresh tape or pads. If you remove a mount yourself, slide a plastic card underneath and peel slowly; gentle heat can soften adhesive, and isopropyl alcohol can clean residue. Keep a spare adhesive pad or suction cup and snap a photo of your original dash cam angle so reinstallation is simple after safe drive-away time. These steps support a clean urethane bond line and are backed by Bang AutoGlass' lifetime workmanship warranty.
ADAS and Accessories on Dodge Ram 2500 Regular Cab: What to Disclose and Calibration Planning
On many Dodge Ram 2500 Regular Cab trims, the windshield is part of the vehicle’s safety tech, so details up front prevent delays with your mobile windshield replacement. Start with what’s behind the rearview mirror: an ADAS camera may support lane keeping, forward collision alerts, and automatic emergency braking. Next, note options that affect the part number, such as rain/light sensors, heated elements, acoustic laminate, a heads-up display (HUD) zone, or specialty moldings and brackets. Then disclose accessories and wiring in the mirror area—dash cams, radar detectors, hardwired phone mounts, toll transponders, parking permits, aftermarket mirrors, or tint bands—because we may need to remove, protect, or reattach them. Sharing this information helps us arrive with the correct windshield and reduces the risk of broken clips. Finally, plan for calibration. Depending on VIN and equipment, your Dodge Ram 2500 Regular Cab may require ADAS calibration after windshield replacement so the camera reads correctly through the new glass. Calibration may be static (targets and scan tools) or dynamic (a defined on-road drive cycle). Bang AutoGlass installs the glass on-site and will help coordinate calibration timing and insurer documentation. If you’re using comprehensive coverage, keep your claim number available; our work is backed by a lifetime workmanship warranty.
Safe Drive-Away Time After Install: Urethane Cure, Tape, and First-24-Hour Rules
Safe drive-away time is the window that lets urethane adhesive reach enough strength to hold the windshield in a sudden stop or collision. For most Dodge Ram 2500 Regular Cab mobile windshield replacements, the swap takes 30–45 minutes; then wait at least one full hour before driving unless we advise longer for temperature or humidity. If retention tape is applied, leave it until we say it can come off—it stabilizes the glass while the bond sets. During the first 24 hours, keep stress off the fresh seal: avoid high-pressure car washes, pressure washers, and water jets aimed at the edges, and postpone detailing that floods the cowl. Try not to slam doors; if possible, crack one window for the first hour or two to reduce cabin-pressure spikes. Drive smoothly and avoid rough roads, potholes, and off-road vibration during the initial cure. Hold off on reinstalling heavy windshield-mounted accessories (dash cams, phone mounts, toll tags) until the adhesive has set. Full cure can take longer than a day, but these steps help prevent leaks, wind noise, and molding shift. If you notice moisture, a whistle, or loose trim, contact Bang AutoGlass promptly—your service is covered by our lifetime workmanship warranty.
Day-Of Walkaround and Sign-Off: Condition Photos, Leak Check, and Documentation
A day-of walkaround keeps your Dodge Ram 2500 Regular Cab mobile windshield replacement simple to document and easy to approve. Before work begins, we inspect the windshield opening and note any paint chips, rust, prior repairs, or scratches near the A-pillars, roof edge, and cowl. If you’re filing through insurance, take your own photos as a baseline—one wide shot plus a few close-ups around the perimeter. After the windshield is installed, we review fit and finish: the glass should be centered, the reveal even, moldings flush, and wipers and cowl panels reinstalled securely. For ADAS-equipped Dodge Ram 2500 Regular Cab vehicles, we confirm the camera/sensor housing is clean, properly seated, and not obstructed by stickers or accessory mounts. Next, we talk about sealing expectations. We visually check the perimeter and explain when it’s appropriate to do a gentle water test after the safe drive-away window. Finally, we complete paperwork and sign-off: the part used, the service performed, any ADAS calibration plan if required, and written safe drive-away instructions. If a comprehensive claim is involved, we can verify the claim number at checkout. Keep your records—Bang AutoGlass backs workmanship with a lifetime warranty.
Services
Service Areas
Pre-Appointment Checklist: Preparing Dodge Ram 2500 Regular Cab for Mobile Windshield Replacement
Confirm Appointment Details: VIN, Photos, and Dodge Ram 2500 Regular Cab Options to Verify
A smooth Dodge Ram 2500 Regular Cab mobile windshield replacement starts with quick verification so we can bring the right glass and hardware. Send the VIN (Vehicle Identification Number) to confirm your exact year and trim and to identify features that affect fitment, including a rain/light sensor pad, ADAS camera bracket, heated elements, acoustic laminate, a heads-up display (HUD) cutout, or uncommon molding styles. Next, share three photos: a full outside view of the windshield, a close-up of the damage, and an interior shot of the mirror and upper dash where cameras and sensors mount. With this information, we can select the proper windshield, plan for clips or moldings, and keep the technician on schedule. Decide on glass type as well. OEM windshield glass is best when you want the closest factory match for tint and technology, while premium aftermarket windshield replacement glass can be budget-friendly when it meets safety standards. If you plan to use insurance, have your claim number ready (or policy details) and verify comprehensive coverage. Finally, confirm the service address, a reliable day-of phone number, and where the Dodge Ram 2500 Regular Cab will be parked so your on-site windshield replacement is completed efficiently, supported by Bang AutoGlass' lifetime workmanship warranty.
Choose the Right Mobile Service Location: Parking Space, Weather, and Access
The location you choose can make your Dodge Ram 2500 Regular Cab mobile windshield replacement faster and help protect install quality. Pick a flat, stable surface with enough clearance to open doors, lift wipers, remove cowl trim, and safely maneuver the new glass—an open driveway, a garage bay, or a quiet parking-lot corner works well. Avoid cramped decks, bumper-to-bumper stalls, or busy curbside spots with heavy foot traffic, since we need close access to the windshield perimeter and tooling space. Good lighting and a clean work area reduce the risk of debris contaminating the bond line. Weather also matters: urethane adhesive performance and bond cleanliness are influenced by temperature, humidity, rain, snow, and wind-driven dust. If conditions are wet, gusty, or below comfortable working temperatures, a covered area is best, or we can adjust scheduling to keep the install clean. You do not need outlets or shop equipment; we arrive fully mobile with the tools and materials required. Plan for the full window: most swaps take about 30-45 minutes, plus a recommended minimum of one hour of safe drive-away time. With the right setup, your Dodge Ram 2500 Regular Cab windshield replacement remains protected under Bang AutoGlass' lifetime workmanship warranty.
Clear the Work Area: Remove Personal Items, Toll Tags, Dash Cameras, and Valuables
A quick interior reset helps your Dodge Ram 2500 Regular Cab auto glass replacement go faster and reduces the chance of lost or damaged items. Clear the dashboard, center console, and front seats so we can work around the A-pillars, mirror mount, and camera/sensor area without obstruction. Remove loose items and valuables such as wallets, cash, laptops, keys, garage remotes, and tools. Take down windshield-mounted accessories including dash cams, phone mounts, GPS units, radar detectors, permits, and stickers near the sensor zone. If a dash cam is hardwired or uses parking mode, power it down to prevent alerts while trim is handled. Remember toll tags (E-ZPass, SunPass, FasTrak, and similar). Because adhesive brackets often cannot be reused on new glass, plan to remount with fresh tape or pads. If you remove a mount yourself, slide a plastic card underneath and peel slowly; gentle heat can soften adhesive, and isopropyl alcohol can clean residue. Keep a spare adhesive pad or suction cup and snap a photo of your original dash cam angle so reinstallation is simple after safe drive-away time. These steps support a clean urethane bond line and are backed by Bang AutoGlass' lifetime workmanship warranty.
ADAS and Accessories on Dodge Ram 2500 Regular Cab: What to Disclose and Calibration Planning
On many Dodge Ram 2500 Regular Cab trims, the windshield is part of the vehicle’s safety tech, so details up front prevent delays with your mobile windshield replacement. Start with what’s behind the rearview mirror: an ADAS camera may support lane keeping, forward collision alerts, and automatic emergency braking. Next, note options that affect the part number, such as rain/light sensors, heated elements, acoustic laminate, a heads-up display (HUD) zone, or specialty moldings and brackets. Then disclose accessories and wiring in the mirror area—dash cams, radar detectors, hardwired phone mounts, toll transponders, parking permits, aftermarket mirrors, or tint bands—because we may need to remove, protect, or reattach them. Sharing this information helps us arrive with the correct windshield and reduces the risk of broken clips. Finally, plan for calibration. Depending on VIN and equipment, your Dodge Ram 2500 Regular Cab may require ADAS calibration after windshield replacement so the camera reads correctly through the new glass. Calibration may be static (targets and scan tools) or dynamic (a defined on-road drive cycle). Bang AutoGlass installs the glass on-site and will help coordinate calibration timing and insurer documentation. If you’re using comprehensive coverage, keep your claim number available; our work is backed by a lifetime workmanship warranty.
Safe Drive-Away Time After Install: Urethane Cure, Tape, and First-24-Hour Rules
Safe drive-away time is the window that lets urethane adhesive reach enough strength to hold the windshield in a sudden stop or collision. For most Dodge Ram 2500 Regular Cab mobile windshield replacements, the swap takes 30–45 minutes; then wait at least one full hour before driving unless we advise longer for temperature or humidity. If retention tape is applied, leave it until we say it can come off—it stabilizes the glass while the bond sets. During the first 24 hours, keep stress off the fresh seal: avoid high-pressure car washes, pressure washers, and water jets aimed at the edges, and postpone detailing that floods the cowl. Try not to slam doors; if possible, crack one window for the first hour or two to reduce cabin-pressure spikes. Drive smoothly and avoid rough roads, potholes, and off-road vibration during the initial cure. Hold off on reinstalling heavy windshield-mounted accessories (dash cams, phone mounts, toll tags) until the adhesive has set. Full cure can take longer than a day, but these steps help prevent leaks, wind noise, and molding shift. If you notice moisture, a whistle, or loose trim, contact Bang AutoGlass promptly—your service is covered by our lifetime workmanship warranty.
Day-Of Walkaround and Sign-Off: Condition Photos, Leak Check, and Documentation
A day-of walkaround keeps your Dodge Ram 2500 Regular Cab mobile windshield replacement simple to document and easy to approve. Before work begins, we inspect the windshield opening and note any paint chips, rust, prior repairs, or scratches near the A-pillars, roof edge, and cowl. If you’re filing through insurance, take your own photos as a baseline—one wide shot plus a few close-ups around the perimeter. After the windshield is installed, we review fit and finish: the glass should be centered, the reveal even, moldings flush, and wipers and cowl panels reinstalled securely. For ADAS-equipped Dodge Ram 2500 Regular Cab vehicles, we confirm the camera/sensor housing is clean, properly seated, and not obstructed by stickers or accessory mounts. Next, we talk about sealing expectations. We visually check the perimeter and explain when it’s appropriate to do a gentle water test after the safe drive-away window. Finally, we complete paperwork and sign-off: the part used, the service performed, any ADAS calibration plan if required, and written safe drive-away instructions. If a comprehensive claim is involved, we can verify the claim number at checkout. Keep your records—Bang AutoGlass backs workmanship with a lifetime warranty.
Services
Service Areas
Pre-Appointment Checklist: Preparing Dodge Ram 2500 Regular Cab for Mobile Windshield Replacement
Confirm Appointment Details: VIN, Photos, and Dodge Ram 2500 Regular Cab Options to Verify
A smooth Dodge Ram 2500 Regular Cab mobile windshield replacement starts with quick verification so we can bring the right glass and hardware. Send the VIN (Vehicle Identification Number) to confirm your exact year and trim and to identify features that affect fitment, including a rain/light sensor pad, ADAS camera bracket, heated elements, acoustic laminate, a heads-up display (HUD) cutout, or uncommon molding styles. Next, share three photos: a full outside view of the windshield, a close-up of the damage, and an interior shot of the mirror and upper dash where cameras and sensors mount. With this information, we can select the proper windshield, plan for clips or moldings, and keep the technician on schedule. Decide on glass type as well. OEM windshield glass is best when you want the closest factory match for tint and technology, while premium aftermarket windshield replacement glass can be budget-friendly when it meets safety standards. If you plan to use insurance, have your claim number ready (or policy details) and verify comprehensive coverage. Finally, confirm the service address, a reliable day-of phone number, and where the Dodge Ram 2500 Regular Cab will be parked so your on-site windshield replacement is completed efficiently, supported by Bang AutoGlass' lifetime workmanship warranty.
Choose the Right Mobile Service Location: Parking Space, Weather, and Access
The location you choose can make your Dodge Ram 2500 Regular Cab mobile windshield replacement faster and help protect install quality. Pick a flat, stable surface with enough clearance to open doors, lift wipers, remove cowl trim, and safely maneuver the new glass—an open driveway, a garage bay, or a quiet parking-lot corner works well. Avoid cramped decks, bumper-to-bumper stalls, or busy curbside spots with heavy foot traffic, since we need close access to the windshield perimeter and tooling space. Good lighting and a clean work area reduce the risk of debris contaminating the bond line. Weather also matters: urethane adhesive performance and bond cleanliness are influenced by temperature, humidity, rain, snow, and wind-driven dust. If conditions are wet, gusty, or below comfortable working temperatures, a covered area is best, or we can adjust scheduling to keep the install clean. You do not need outlets or shop equipment; we arrive fully mobile with the tools and materials required. Plan for the full window: most swaps take about 30-45 minutes, plus a recommended minimum of one hour of safe drive-away time. With the right setup, your Dodge Ram 2500 Regular Cab windshield replacement remains protected under Bang AutoGlass' lifetime workmanship warranty.
Clear the Work Area: Remove Personal Items, Toll Tags, Dash Cameras, and Valuables
A quick interior reset helps your Dodge Ram 2500 Regular Cab auto glass replacement go faster and reduces the chance of lost or damaged items. Clear the dashboard, center console, and front seats so we can work around the A-pillars, mirror mount, and camera/sensor area without obstruction. Remove loose items and valuables such as wallets, cash, laptops, keys, garage remotes, and tools. Take down windshield-mounted accessories including dash cams, phone mounts, GPS units, radar detectors, permits, and stickers near the sensor zone. If a dash cam is hardwired or uses parking mode, power it down to prevent alerts while trim is handled. Remember toll tags (E-ZPass, SunPass, FasTrak, and similar). Because adhesive brackets often cannot be reused on new glass, plan to remount with fresh tape or pads. If you remove a mount yourself, slide a plastic card underneath and peel slowly; gentle heat can soften adhesive, and isopropyl alcohol can clean residue. Keep a spare adhesive pad or suction cup and snap a photo of your original dash cam angle so reinstallation is simple after safe drive-away time. These steps support a clean urethane bond line and are backed by Bang AutoGlass' lifetime workmanship warranty.
ADAS and Accessories on Dodge Ram 2500 Regular Cab: What to Disclose and Calibration Planning
On many Dodge Ram 2500 Regular Cab trims, the windshield is part of the vehicle’s safety tech, so details up front prevent delays with your mobile windshield replacement. Start with what’s behind the rearview mirror: an ADAS camera may support lane keeping, forward collision alerts, and automatic emergency braking. Next, note options that affect the part number, such as rain/light sensors, heated elements, acoustic laminate, a heads-up display (HUD) zone, or specialty moldings and brackets. Then disclose accessories and wiring in the mirror area—dash cams, radar detectors, hardwired phone mounts, toll transponders, parking permits, aftermarket mirrors, or tint bands—because we may need to remove, protect, or reattach them. Sharing this information helps us arrive with the correct windshield and reduces the risk of broken clips. Finally, plan for calibration. Depending on VIN and equipment, your Dodge Ram 2500 Regular Cab may require ADAS calibration after windshield replacement so the camera reads correctly through the new glass. Calibration may be static (targets and scan tools) or dynamic (a defined on-road drive cycle). Bang AutoGlass installs the glass on-site and will help coordinate calibration timing and insurer documentation. If you’re using comprehensive coverage, keep your claim number available; our work is backed by a lifetime workmanship warranty.
Safe Drive-Away Time After Install: Urethane Cure, Tape, and First-24-Hour Rules
Safe drive-away time is the window that lets urethane adhesive reach enough strength to hold the windshield in a sudden stop or collision. For most Dodge Ram 2500 Regular Cab mobile windshield replacements, the swap takes 30–45 minutes; then wait at least one full hour before driving unless we advise longer for temperature or humidity. If retention tape is applied, leave it until we say it can come off—it stabilizes the glass while the bond sets. During the first 24 hours, keep stress off the fresh seal: avoid high-pressure car washes, pressure washers, and water jets aimed at the edges, and postpone detailing that floods the cowl. Try not to slam doors; if possible, crack one window for the first hour or two to reduce cabin-pressure spikes. Drive smoothly and avoid rough roads, potholes, and off-road vibration during the initial cure. Hold off on reinstalling heavy windshield-mounted accessories (dash cams, phone mounts, toll tags) until the adhesive has set. Full cure can take longer than a day, but these steps help prevent leaks, wind noise, and molding shift. If you notice moisture, a whistle, or loose trim, contact Bang AutoGlass promptly—your service is covered by our lifetime workmanship warranty.
Day-Of Walkaround and Sign-Off: Condition Photos, Leak Check, and Documentation
A day-of walkaround keeps your Dodge Ram 2500 Regular Cab mobile windshield replacement simple to document and easy to approve. Before work begins, we inspect the windshield opening and note any paint chips, rust, prior repairs, or scratches near the A-pillars, roof edge, and cowl. If you’re filing through insurance, take your own photos as a baseline—one wide shot plus a few close-ups around the perimeter. After the windshield is installed, we review fit and finish: the glass should be centered, the reveal even, moldings flush, and wipers and cowl panels reinstalled securely. For ADAS-equipped Dodge Ram 2500 Regular Cab vehicles, we confirm the camera/sensor housing is clean, properly seated, and not obstructed by stickers or accessory mounts. Next, we talk about sealing expectations. We visually check the perimeter and explain when it’s appropriate to do a gentle water test after the safe drive-away window. Finally, we complete paperwork and sign-off: the part used, the service performed, any ADAS calibration plan if required, and written safe drive-away instructions. If a comprehensive claim is involved, we can verify the claim number at checkout. Keep your records—Bang AutoGlass backs workmanship with a lifetime warranty.
Enjoy More Relevant Blogs
Tempered vs Laminated Door Glass on Dodge Ram 2500 Regular Cab: What’s Used and Why It Matters
Tempered vs laminated door glass on Dodge Ram 2500 Regular Cab: what your vehicle uses, how it breaks, and what it means for replacement safety, cost, and cleanup.
How to Schedule ADAS Calibration for Ford F250 Super Duty Crew Cab After Windshield Replacement
Schedule ADAS calibration for Ford F250 Super Duty Crew Cab after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
After a Break-In: Dodge Challenger Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Dodge Challenger, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Will Insurance Cover Door Glass Replacement for a Ford Focus RS? Claims Steps, Deductibles, and What to Document
Will insurance cover Ford Focus RS door glass replacement? Learn claim steps, deductibles, photos to document, and how to schedule fast repairs today.
ADAS After Windshield Replacement on Gmc Terrain: Calibration Basics and Safety Checks
ADAS after Gmc Terrain windshield replacement: calibration basics, common safety checks, and how to confirm cameras and sensors are working correctly.
How to Schedule Mobile Rear Glass Replacement for Gmc Rally Wagon 2500
Schedule mobile rear glass replacement for your Gmc Rally Wagon 2500 in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Stop Leaks and Wind Noise: What Proper Dodge Durango Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Dodge Durango quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
Tempered Safety Rear Glass Replacement for Gmc Canyon Crew Cab: Understanding DOT Markings and FMVSS 205
Need Gmc Canyon Crew Cab rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Post-Install Checks for Gmc Sierra (Classic) 1500 Extended Cab: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Gmc Sierra (Classic) 1500 Extended Cab: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Fast Scheduling Guide: Gmc Sierra 3500 Hd Extended Cab Windshield Replacement From Booking to Install
Book Gmc Sierra 3500 Hd Extended Cab windshield replacement fast. See scheduling steps, what to prep, install timing, and when you can safely drive away. Get a quote today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm