Services
Service Areas
Safety Standards Explained: DOT Markings and FMVSS 205 for Ferrari 458 Speciale Quarter Glass Replacement
FMVSS 205 and ANSI/SAE Z26.1 for Ferrari 458 Speciale Quarter Glass: What the Standard Covers
FMVSS 205 is the standard behind a proper Ferrari 458 Speciale quarter glass replacement. The rule (49 CFR 571.205) covers motor-vehicle glazing and, by incorporating ANSI/SAE Z26.1, sets the definitions, test methods, and AS safety-glazing classes that appear on the glass stamp. A correct replacement should show two key identifiers: a DOT marking that ties the glass to a registered glazing manufacturer and an AS designation that matches the performance class for that window position. Regulators focus on safety and visibility-limiting injuries from broken glass, preserving optical clarity, and reducing ejection risk in a crash. For quarter windows, that means "it fits" is not enough; the glass must be the right safety-glazing type and classification, and aftermarket replacements are expected to meet the same applicable requirements as the original part. Bang AutoGlass applies this as a hands-on process for Ferrari 458 Speciale: verify DOT/AS markings, match tint, and install to restore factory fit. As a mobile service that can often schedule next day, quarter glass replacements typically take about 30-45 minutes once work starts. We recommend at least 1 hour of safe drive-away time for adhesive curing, backed by a lifetime workmanship warranty.
Reading the Quarter Glass Stamp: DOT Symbol, Manufacturer Code, and Required Markings
A quick validation step for a Ferrari 458 Speciale quarter glass replacement is checking the stamp, the etched or laser-applied markings on the glass. Because FMVSS 205 incorporates ANSI/SAE Z26.1, prime glazing manufacturers self-certify compliance by adding specific identifiers. Look for "DOT" followed by a manufacturer code mark assigned by NHTSA, plus the manufacturer's name/trademark and other required information. The DOT code is a traceability link to the registered prime glazing manufacturer, not an official approval seal. Then verify the AS designation-often AS2 or AS3 on quarter windows-which indicates the safety-glazing class and the locations where that glass is intended to be used. Many stamps also show an "M" number or model code to differentiate constructions such as privacy tint, thickness, or solar coatings, and may state "Tempered" or "Laminated." These details matter: if the AS class or construction is wrong for that window position, the part can be effectively noncompliant even if it fits the opening. During mobile Ferrari 458 Speciale quarter glass replacement, Bang AutoGlass checks the new stamp and, when possible, compares it to the original so the replacement matches the intended tint/build and carries the expected DOT/AS markings for OEM or aftermarket glass.
AS Ratings and Safety Glazing Types: What Quarter Glass Is Typically Made From
AS ratings on Ferrari 458 Speciale quarter glass indicate the safety-glazing class, and the DOT mark identifies the manufacturer that self-certifies the glass under FMVSS 205. Because FMVSS 205 incorporates ANSI/SAE Z26.1, each AS class maps to a defined glazing item and tests for impact behavior, strength, and optical quality. Light transmittance is one key factor: glazing considered "requisite for driving visibility" is commonly discussed as needing at least 70% transmission. NHTSA has historically treated passenger cars broadly here, including rear quarter windows, while some trucks and MPVs may have different allowances for rearward side glazing based on vehicle classification. Most quarter windows are tempered safety glass, selected because it fractures into small pieces to reduce injury risk. Laminated side glass can also be used, but only when correctly classified and marked for that location. Tint is where AS labels become practical: AS2 generally aligns with higher light transmission, while AS3 typically indicates darker, privacy-style glazing used in permitted rearward positions. The correct Ferrari 458 Speciale quarter glass replacement matches the factory stamp and tint so the window looks right and remains FMVSS 205-aligned. Bang AutoGlass verifies DOT/AS markings before installation.
Aftermarket Replacement Requirements: What Must Comply for Ferrari 458 Speciale Quarter Glass
Aftermarket quarter glass can be a practical choice for Ferrari 458 Speciale quarter glass replacement—if it meets the same safety-glazing rules as the original. FMVSS 205 (49 CFR 571.205) requires replacement glazing to satisfy the requirements that apply to the glazing being replaced, which links back to ANSI/SAE Z26.1 classifications, tests, and marking rules. “Aftermarket” is not a workaround; the glass still needs the correct safety performance and the correct label set. Look for Z26.1-required markings on the part, including the AS designation and the prime manufacturer’s distinctive trademark/designation. Most compliant pieces also show the DOT symbol with an NHTSA-assigned manufacturer code mark for traceability. If a supplier cuts smaller parts from properly marked stock, the finished quarter glass still must be marked or packaged/labeled in a way that certifies Z26.1 compliance, even if the prime DOT code is not re-stamped on every cut piece. Bang AutoGlass builds these checks into selection and installation. We’re fully mobile, can often schedule as soon as next day, and most quarter glass jobs take about 30–45 minutes once work begins. We recommend at least 1 hour of safe drive-away time for adhesive curing. With comprehensive coverage, we work with all insurance companies and include a lifetime workmanship warranty.
Verifying the Correct Replacement: Markings, Tint Match, and Visual Distortion Checks
For Ferrari 458 Speciale quarter glass replacement, validate the part in a simple sequence: markings, match, then optics. First, compare the stamp to the original glass. Verify the DOT marking and manufacturer code, confirm the AS rating, and check any manufacturer model/designation (“M”) number that points to the correct construction and tint variant. Under FMVSS 205 and ANSI/SAE Z26.1, the AS marking corresponds to a defined safety-glazing class and permitted use location, so a mismatch can signal the wrong glazing type or tint category for that window position. Next, inspect tint and edge details like you would inspect bodywork. Confirm privacy shade consistency with adjacent windows, look for expected coatings (solar, UV, heat-rejecting), and review the ceramic border/frit for uniformity. These details affect both appearance and the integrity of an adhesive-bonded install by helping protect the urethane and hide the bond line. Finally, check visual quality. From inside and outside, use straight references to spot ripples, waviness, or localized distortion that can interfere with shoulder checks and blind-spot scanning. Bang AutoGlass includes these verification steps as part of mobile Ferrari 458 Speciale quarter glass replacement so the installed glass matches the intended markings, tint, and optical clarity.
Documentation and Quality Controls: What to Keep After Ferrari 458 Speciale Quarter Glass Replacement
After Ferrari 458 Speciale quarter glass replacement, keep records as a practical safeguard for warranty, insurance, and future questions about what was installed. Retain an itemized invoice with vehicle details, the glass replaced, and the service date, plus the warranty terms. For quick traceability, take a clear photo of the installed stamp showing the DOT marking, AS designation, and any model/designation number. If insurance is involved, save the claim number and any authorizations or adjuster notes; we work with all insurance companies as long as your policy includes comprehensive coverage. Quality controls are the other half of a proper job. Best-practice glass replacement focuses on correct part selection, surface preparation, adhesive system compatibility, and clear communication about cure time. In everyday terms, that means verifying markings and tint, prepping bonding areas correctly, applying the proper urethane, and completing a final inspection for fit, leaks, wind noise, and clean trim lines. We also provide safe drive-away guidance: most quarter glass installs take about 30–45 minutes once work begins, and we recommend at least 1 hour before driving. Keep Bang AutoGlass contact details with your paperwork—every install is backed by a lifetime workmanship warranty.
Services
Service Areas
Safety Standards Explained: DOT Markings and FMVSS 205 for Ferrari 458 Speciale Quarter Glass Replacement
FMVSS 205 and ANSI/SAE Z26.1 for Ferrari 458 Speciale Quarter Glass: What the Standard Covers
FMVSS 205 is the standard behind a proper Ferrari 458 Speciale quarter glass replacement. The rule (49 CFR 571.205) covers motor-vehicle glazing and, by incorporating ANSI/SAE Z26.1, sets the definitions, test methods, and AS safety-glazing classes that appear on the glass stamp. A correct replacement should show two key identifiers: a DOT marking that ties the glass to a registered glazing manufacturer and an AS designation that matches the performance class for that window position. Regulators focus on safety and visibility-limiting injuries from broken glass, preserving optical clarity, and reducing ejection risk in a crash. For quarter windows, that means "it fits" is not enough; the glass must be the right safety-glazing type and classification, and aftermarket replacements are expected to meet the same applicable requirements as the original part. Bang AutoGlass applies this as a hands-on process for Ferrari 458 Speciale: verify DOT/AS markings, match tint, and install to restore factory fit. As a mobile service that can often schedule next day, quarter glass replacements typically take about 30-45 minutes once work starts. We recommend at least 1 hour of safe drive-away time for adhesive curing, backed by a lifetime workmanship warranty.
Reading the Quarter Glass Stamp: DOT Symbol, Manufacturer Code, and Required Markings
A quick validation step for a Ferrari 458 Speciale quarter glass replacement is checking the stamp, the etched or laser-applied markings on the glass. Because FMVSS 205 incorporates ANSI/SAE Z26.1, prime glazing manufacturers self-certify compliance by adding specific identifiers. Look for "DOT" followed by a manufacturer code mark assigned by NHTSA, plus the manufacturer's name/trademark and other required information. The DOT code is a traceability link to the registered prime glazing manufacturer, not an official approval seal. Then verify the AS designation-often AS2 or AS3 on quarter windows-which indicates the safety-glazing class and the locations where that glass is intended to be used. Many stamps also show an "M" number or model code to differentiate constructions such as privacy tint, thickness, or solar coatings, and may state "Tempered" or "Laminated." These details matter: if the AS class or construction is wrong for that window position, the part can be effectively noncompliant even if it fits the opening. During mobile Ferrari 458 Speciale quarter glass replacement, Bang AutoGlass checks the new stamp and, when possible, compares it to the original so the replacement matches the intended tint/build and carries the expected DOT/AS markings for OEM or aftermarket glass.
AS Ratings and Safety Glazing Types: What Quarter Glass Is Typically Made From
AS ratings on Ferrari 458 Speciale quarter glass indicate the safety-glazing class, and the DOT mark identifies the manufacturer that self-certifies the glass under FMVSS 205. Because FMVSS 205 incorporates ANSI/SAE Z26.1, each AS class maps to a defined glazing item and tests for impact behavior, strength, and optical quality. Light transmittance is one key factor: glazing considered "requisite for driving visibility" is commonly discussed as needing at least 70% transmission. NHTSA has historically treated passenger cars broadly here, including rear quarter windows, while some trucks and MPVs may have different allowances for rearward side glazing based on vehicle classification. Most quarter windows are tempered safety glass, selected because it fractures into small pieces to reduce injury risk. Laminated side glass can also be used, but only when correctly classified and marked for that location. Tint is where AS labels become practical: AS2 generally aligns with higher light transmission, while AS3 typically indicates darker, privacy-style glazing used in permitted rearward positions. The correct Ferrari 458 Speciale quarter glass replacement matches the factory stamp and tint so the window looks right and remains FMVSS 205-aligned. Bang AutoGlass verifies DOT/AS markings before installation.
Aftermarket Replacement Requirements: What Must Comply for Ferrari 458 Speciale Quarter Glass
Aftermarket quarter glass can be a practical choice for Ferrari 458 Speciale quarter glass replacement—if it meets the same safety-glazing rules as the original. FMVSS 205 (49 CFR 571.205) requires replacement glazing to satisfy the requirements that apply to the glazing being replaced, which links back to ANSI/SAE Z26.1 classifications, tests, and marking rules. “Aftermarket” is not a workaround; the glass still needs the correct safety performance and the correct label set. Look for Z26.1-required markings on the part, including the AS designation and the prime manufacturer’s distinctive trademark/designation. Most compliant pieces also show the DOT symbol with an NHTSA-assigned manufacturer code mark for traceability. If a supplier cuts smaller parts from properly marked stock, the finished quarter glass still must be marked or packaged/labeled in a way that certifies Z26.1 compliance, even if the prime DOT code is not re-stamped on every cut piece. Bang AutoGlass builds these checks into selection and installation. We’re fully mobile, can often schedule as soon as next day, and most quarter glass jobs take about 30–45 minutes once work begins. We recommend at least 1 hour of safe drive-away time for adhesive curing. With comprehensive coverage, we work with all insurance companies and include a lifetime workmanship warranty.
Verifying the Correct Replacement: Markings, Tint Match, and Visual Distortion Checks
For Ferrari 458 Speciale quarter glass replacement, validate the part in a simple sequence: markings, match, then optics. First, compare the stamp to the original glass. Verify the DOT marking and manufacturer code, confirm the AS rating, and check any manufacturer model/designation (“M”) number that points to the correct construction and tint variant. Under FMVSS 205 and ANSI/SAE Z26.1, the AS marking corresponds to a defined safety-glazing class and permitted use location, so a mismatch can signal the wrong glazing type or tint category for that window position. Next, inspect tint and edge details like you would inspect bodywork. Confirm privacy shade consistency with adjacent windows, look for expected coatings (solar, UV, heat-rejecting), and review the ceramic border/frit for uniformity. These details affect both appearance and the integrity of an adhesive-bonded install by helping protect the urethane and hide the bond line. Finally, check visual quality. From inside and outside, use straight references to spot ripples, waviness, or localized distortion that can interfere with shoulder checks and blind-spot scanning. Bang AutoGlass includes these verification steps as part of mobile Ferrari 458 Speciale quarter glass replacement so the installed glass matches the intended markings, tint, and optical clarity.
Documentation and Quality Controls: What to Keep After Ferrari 458 Speciale Quarter Glass Replacement
After Ferrari 458 Speciale quarter glass replacement, keep records as a practical safeguard for warranty, insurance, and future questions about what was installed. Retain an itemized invoice with vehicle details, the glass replaced, and the service date, plus the warranty terms. For quick traceability, take a clear photo of the installed stamp showing the DOT marking, AS designation, and any model/designation number. If insurance is involved, save the claim number and any authorizations or adjuster notes; we work with all insurance companies as long as your policy includes comprehensive coverage. Quality controls are the other half of a proper job. Best-practice glass replacement focuses on correct part selection, surface preparation, adhesive system compatibility, and clear communication about cure time. In everyday terms, that means verifying markings and tint, prepping bonding areas correctly, applying the proper urethane, and completing a final inspection for fit, leaks, wind noise, and clean trim lines. We also provide safe drive-away guidance: most quarter glass installs take about 30–45 minutes once work begins, and we recommend at least 1 hour before driving. Keep Bang AutoGlass contact details with your paperwork—every install is backed by a lifetime workmanship warranty.
Services
Service Areas
Safety Standards Explained: DOT Markings and FMVSS 205 for Ferrari 458 Speciale Quarter Glass Replacement
FMVSS 205 and ANSI/SAE Z26.1 for Ferrari 458 Speciale Quarter Glass: What the Standard Covers
FMVSS 205 is the standard behind a proper Ferrari 458 Speciale quarter glass replacement. The rule (49 CFR 571.205) covers motor-vehicle glazing and, by incorporating ANSI/SAE Z26.1, sets the definitions, test methods, and AS safety-glazing classes that appear on the glass stamp. A correct replacement should show two key identifiers: a DOT marking that ties the glass to a registered glazing manufacturer and an AS designation that matches the performance class for that window position. Regulators focus on safety and visibility-limiting injuries from broken glass, preserving optical clarity, and reducing ejection risk in a crash. For quarter windows, that means "it fits" is not enough; the glass must be the right safety-glazing type and classification, and aftermarket replacements are expected to meet the same applicable requirements as the original part. Bang AutoGlass applies this as a hands-on process for Ferrari 458 Speciale: verify DOT/AS markings, match tint, and install to restore factory fit. As a mobile service that can often schedule next day, quarter glass replacements typically take about 30-45 minutes once work starts. We recommend at least 1 hour of safe drive-away time for adhesive curing, backed by a lifetime workmanship warranty.
Reading the Quarter Glass Stamp: DOT Symbol, Manufacturer Code, and Required Markings
A quick validation step for a Ferrari 458 Speciale quarter glass replacement is checking the stamp, the etched or laser-applied markings on the glass. Because FMVSS 205 incorporates ANSI/SAE Z26.1, prime glazing manufacturers self-certify compliance by adding specific identifiers. Look for "DOT" followed by a manufacturer code mark assigned by NHTSA, plus the manufacturer's name/trademark and other required information. The DOT code is a traceability link to the registered prime glazing manufacturer, not an official approval seal. Then verify the AS designation-often AS2 or AS3 on quarter windows-which indicates the safety-glazing class and the locations where that glass is intended to be used. Many stamps also show an "M" number or model code to differentiate constructions such as privacy tint, thickness, or solar coatings, and may state "Tempered" or "Laminated." These details matter: if the AS class or construction is wrong for that window position, the part can be effectively noncompliant even if it fits the opening. During mobile Ferrari 458 Speciale quarter glass replacement, Bang AutoGlass checks the new stamp and, when possible, compares it to the original so the replacement matches the intended tint/build and carries the expected DOT/AS markings for OEM or aftermarket glass.
AS Ratings and Safety Glazing Types: What Quarter Glass Is Typically Made From
AS ratings on Ferrari 458 Speciale quarter glass indicate the safety-glazing class, and the DOT mark identifies the manufacturer that self-certifies the glass under FMVSS 205. Because FMVSS 205 incorporates ANSI/SAE Z26.1, each AS class maps to a defined glazing item and tests for impact behavior, strength, and optical quality. Light transmittance is one key factor: glazing considered "requisite for driving visibility" is commonly discussed as needing at least 70% transmission. NHTSA has historically treated passenger cars broadly here, including rear quarter windows, while some trucks and MPVs may have different allowances for rearward side glazing based on vehicle classification. Most quarter windows are tempered safety glass, selected because it fractures into small pieces to reduce injury risk. Laminated side glass can also be used, but only when correctly classified and marked for that location. Tint is where AS labels become practical: AS2 generally aligns with higher light transmission, while AS3 typically indicates darker, privacy-style glazing used in permitted rearward positions. The correct Ferrari 458 Speciale quarter glass replacement matches the factory stamp and tint so the window looks right and remains FMVSS 205-aligned. Bang AutoGlass verifies DOT/AS markings before installation.
Aftermarket Replacement Requirements: What Must Comply for Ferrari 458 Speciale Quarter Glass
Aftermarket quarter glass can be a practical choice for Ferrari 458 Speciale quarter glass replacement—if it meets the same safety-glazing rules as the original. FMVSS 205 (49 CFR 571.205) requires replacement glazing to satisfy the requirements that apply to the glazing being replaced, which links back to ANSI/SAE Z26.1 classifications, tests, and marking rules. “Aftermarket” is not a workaround; the glass still needs the correct safety performance and the correct label set. Look for Z26.1-required markings on the part, including the AS designation and the prime manufacturer’s distinctive trademark/designation. Most compliant pieces also show the DOT symbol with an NHTSA-assigned manufacturer code mark for traceability. If a supplier cuts smaller parts from properly marked stock, the finished quarter glass still must be marked or packaged/labeled in a way that certifies Z26.1 compliance, even if the prime DOT code is not re-stamped on every cut piece. Bang AutoGlass builds these checks into selection and installation. We’re fully mobile, can often schedule as soon as next day, and most quarter glass jobs take about 30–45 minutes once work begins. We recommend at least 1 hour of safe drive-away time for adhesive curing. With comprehensive coverage, we work with all insurance companies and include a lifetime workmanship warranty.
Verifying the Correct Replacement: Markings, Tint Match, and Visual Distortion Checks
For Ferrari 458 Speciale quarter glass replacement, validate the part in a simple sequence: markings, match, then optics. First, compare the stamp to the original glass. Verify the DOT marking and manufacturer code, confirm the AS rating, and check any manufacturer model/designation (“M”) number that points to the correct construction and tint variant. Under FMVSS 205 and ANSI/SAE Z26.1, the AS marking corresponds to a defined safety-glazing class and permitted use location, so a mismatch can signal the wrong glazing type or tint category for that window position. Next, inspect tint and edge details like you would inspect bodywork. Confirm privacy shade consistency with adjacent windows, look for expected coatings (solar, UV, heat-rejecting), and review the ceramic border/frit for uniformity. These details affect both appearance and the integrity of an adhesive-bonded install by helping protect the urethane and hide the bond line. Finally, check visual quality. From inside and outside, use straight references to spot ripples, waviness, or localized distortion that can interfere with shoulder checks and blind-spot scanning. Bang AutoGlass includes these verification steps as part of mobile Ferrari 458 Speciale quarter glass replacement so the installed glass matches the intended markings, tint, and optical clarity.
Documentation and Quality Controls: What to Keep After Ferrari 458 Speciale Quarter Glass Replacement
After Ferrari 458 Speciale quarter glass replacement, keep records as a practical safeguard for warranty, insurance, and future questions about what was installed. Retain an itemized invoice with vehicle details, the glass replaced, and the service date, plus the warranty terms. For quick traceability, take a clear photo of the installed stamp showing the DOT marking, AS designation, and any model/designation number. If insurance is involved, save the claim number and any authorizations or adjuster notes; we work with all insurance companies as long as your policy includes comprehensive coverage. Quality controls are the other half of a proper job. Best-practice glass replacement focuses on correct part selection, surface preparation, adhesive system compatibility, and clear communication about cure time. In everyday terms, that means verifying markings and tint, prepping bonding areas correctly, applying the proper urethane, and completing a final inspection for fit, leaks, wind noise, and clean trim lines. We also provide safe drive-away guidance: most quarter glass installs take about 30–45 minutes once work begins, and we recommend at least 1 hour before driving. Keep Bang AutoGlass contact details with your paperwork—every install is backed by a lifetime workmanship warranty.
Enjoy More Relevant Blogs
Tempered vs Laminated Door Glass on Dodge Ram 2500 Regular Cab: What’s Used and Why It Matters
Tempered vs laminated door glass on Dodge Ram 2500 Regular Cab: what your vehicle uses, how it breaks, and what it means for replacement safety, cost, and cleanup.
How to Schedule ADAS Calibration for Ford F250 Super Duty Crew Cab After Windshield Replacement
Schedule ADAS calibration for Ford F250 Super Duty Crew Cab after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
After a Break-In: Dodge Challenger Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Dodge Challenger, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Will Insurance Cover Door Glass Replacement for a Ford Focus RS? Claims Steps, Deductibles, and What to Document
Will insurance cover Ford Focus RS door glass replacement? Learn claim steps, deductibles, photos to document, and how to schedule fast repairs today.
ADAS After Windshield Replacement on Gmc Terrain: Calibration Basics and Safety Checks
ADAS after Gmc Terrain windshield replacement: calibration basics, common safety checks, and how to confirm cameras and sensors are working correctly.
How to Schedule Mobile Rear Glass Replacement for Gmc Rally Wagon 2500
Schedule mobile rear glass replacement for your Gmc Rally Wagon 2500 in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Stop Leaks and Wind Noise: What Proper Dodge Durango Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Dodge Durango quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
Tempered Safety Rear Glass Replacement for Gmc Canyon Crew Cab: Understanding DOT Markings and FMVSS 205
Need Gmc Canyon Crew Cab rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Post-Install Checks for Gmc Sierra (Classic) 1500 Extended Cab: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Gmc Sierra (Classic) 1500 Extended Cab: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Fast Scheduling Guide: Gmc Sierra 3500 Hd Extended Cab Windshield Replacement From Booking to Install
Book Gmc Sierra 3500 Hd Extended Cab windshield replacement fast. See scheduling steps, what to prep, install timing, and when you can safely drive away. Get a quote today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm