Services
Service Areas
ADAS Calibration Checklist for Ford Bronco Raptor: Documentation, Verification, and Final Safety Checks
Identify Ford Bronco Raptor ADAS Systems and OEM Calibration Triggers
Before any ADAS procedure on a Ford Bronco Raptor, document two items: the systems present and the OEM conditions that mandate calibration. Confirm trim and ADAS package content using VIN/build data, then perform a comprehensive diagnostic scan that lists installed ADAS-related modules and configuration details. In practical terms, validate what controls lane functions (often a forward windshield camera), what controls adaptive cruise and forward collision functions (often front radar), and what supports blind spot or parking features (rear radar, ultrasonics, and additional cameras). Where build data and scan results conflict, defer to OEM service information. Align the calibration plan to the OEM trigger list for the work completed. On a Ford Bronco Raptor with a windshield-mounted camera, windshield replacement or camera bracket disturbance commonly requires recalibration because small changes in bracket angle, adhesive thickness, or glass curvature can shift aim. Additional triggers include camera/radar removal and installation, bracket or mounting-surface repair, module replacement or programming, wheel alignment or steering-angle resets, tire-size or ride-height changes, and DTCs indicating lost learned values. Connecting the exact trigger to the correct OEM workflow reduces failures, prevents comebacks, and protects Ford Bronco Raptor safety performance.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
On a Ford Bronco Raptor, the strongest calibration is the one you can substantiate. Start with a pre-scan to establish a baseline across key systems: camera and radar units, ABS/ESC, steering angle, and related body or gateway modules. Capturing DTCs and system status up front identifies pre-existing faults that can derail calibration and creates a clear before record. Document the repair context in auditable terms. Note the customer complaint and warning indicators, then record VIN, mileage, and the work performed. State why calibration is required: windshield replacement on a Ford Bronco Raptor with a camera bracket, camera/radar removal and installation, bumper or grille repairs near the radar, alignment or suspension changes, module replacement or programming, or a software update that resets learned values. Capture photos of the windshield and camera bracket, sensor mounting areas, and any damage, contamination, or aftermarket modifications that could affect sensor aim. Complete the packet for verification: attach the full pre-scan output (current, pending, and history codes plus freeze-frame data when available), record scan tool brand and software level, and note the intended routine (static, dynamic, or combined) and prerequisites. Bang AutoGlass works with all carriers when comprehensive coverage applies, and documentation helps reduce claim friction while supporting our lifetime workmanship warranty.
Vehicle Readiness Checklist for Ford Bronco Raptor: Tires, Alignment, Ride Height, and Sensor/Glass Prep
Calibration accuracy depends on vehicle readiness as much as the setup. For a Ford Bronco Raptor, start with tires and wheels: confirm OEM size/spec, matched side-to-side, even tread depth, and correct inflation. Tire or pressure differences change rolling radius and steering calculations, which can affect lane keeping and adaptive cruise control. Verify wheel alignment is within OEM specifications before calibration. Toe, thrust angle, and steering angle sensor values influence camera and radar interpretation and can cause failures if out of range. Confirm ride height and loading by removing heavy cargo, keeping the spare in place, and meeting any OEM fuel-level requirement. Treat lifts/levels, non-OEM wheels, damaged springs, or unresolved collision damage as go/no-go items because they alter sensor geometry. Finish with sensor and glass prep. On a Ford Bronco Raptor with a windshield camera, inspect the bracket, verify the correct windshield and attachments, and ensure the camera view area is clean and dry with no stickers, haze, tint artifacts, or residue. Confirm wiper/cowl fitment, check radar and ultrasonic sensors are seated and unobstructed, and remove accessories that block sightlines. At Bang AutoGlass, windshield replacement typically takes 30-45 minutes; allow at least one hour of safe drive-away time before dynamic calibration driving.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
Accurate ADAS calibration on a Ford Bronco Raptor depends on disciplined setup. Verify the bay meets OEM requirements and measure the full working area for level, including where targets and stands will sit. Clean the floor so stands do not shift. Establish vehicle reference: confirm centerline and thrust line, center the steering wheel, keep the vehicle straight, and follow any OEM rules for wheel position or suspension settling. Place targets exactly as specified. Measure from the correct OEM reference points, set distances, offsets, and heights, and keep targets square to the vehicle reference with no obstructions in sensor sight lines. Control lighting and reflections: avoid bright sunlight, windshield glare, LED flicker, deep shadows, and moving reflections that can confuse camera pattern recognition. Validate tools. Use the correct target set for the system (forward camera, radar, surround-view), inspect for fading or damage, confirm measurement devices are accurate, and verify scan tool coverage for the Ford Bronco Raptor. Select the correct routine, document tool and software versions, maintain battery voltage with a maintainer, and follow OEM no-touch procedures. These controls improve first-pass success at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Ford Bronco Raptor
For a Ford Bronco Raptor, verification links completion to performance. Start with a post-repair scan as soon as the routine ends. Review camera and radar module status, clear any setup codes, and re-scan to confirm no DTCs remain current or pending. Failed-attempt or communication codes may not illuminate the dash, yet OEM and insurer processes often expect documented post-scan proof. Perform any OEM-directed road validation. If dynamic calibration is required, meet the conditions for roadway type, lane-marking quality, speed band, and minimum duration, and avoid weather or lighting restrictions that invalidate learning. Use a route with consistent lane lines and safe traffic flow. Confirm lane keeping and lane departure behave predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false warn. Validate blind spot and rear cross-traffic alerts where equipped. After windshield work on a Ford Bronco Raptor, allow cure time before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and the adhesive needs at least one hour of safe drive-away time before dynamic driving. Finish by confirming the cluster is clear. If warnings persist, recheck alignment, tire spec, ride height, sensor mounting, and glass fitment, then follow the OEM troubleshooting and recalibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Ford Bronco Raptor
Closeout records protect the driver and the claim after ADAS work on a Ford Bronco Raptor. Build a packet that can be reviewed later without context. Include the scan tool calibration report with VIN, date/time, routine identification, calibrated modules, and pass or fail outcome. Attach pre-scan and post-scan reports to document DTC status before and after service. Document prerequisites and setup with photos of sensor mounting points and the windshield or camera bracket area, plus images showing target placement when static calibration was performed. Include required measurements or alignment printouts. If the Ford Bronco Raptor required dynamic calibration or validation driving, record the OEM routine name, conditions met (speed band, duration), and confirmation that no ADAS warnings were present at completion. Log scan tool platform, software version, target or fixture set used, and battery maintainer usage for compliance and reimbursement. Provide the customer a copy with the invoice and guidance if a warning returns. Bang AutoGlass accepts all insurance companies when comprehensive coverage applies, and thorough documentation reduces back-and-forth while supporting our lifetime workmanship warranty. Retain the packet per policy for each Ford Bronco Raptor.
Services
Service Areas
ADAS Calibration Checklist for Ford Bronco Raptor: Documentation, Verification, and Final Safety Checks
Identify Ford Bronco Raptor ADAS Systems and OEM Calibration Triggers
Before any ADAS procedure on a Ford Bronco Raptor, document two items: the systems present and the OEM conditions that mandate calibration. Confirm trim and ADAS package content using VIN/build data, then perform a comprehensive diagnostic scan that lists installed ADAS-related modules and configuration details. In practical terms, validate what controls lane functions (often a forward windshield camera), what controls adaptive cruise and forward collision functions (often front radar), and what supports blind spot or parking features (rear radar, ultrasonics, and additional cameras). Where build data and scan results conflict, defer to OEM service information. Align the calibration plan to the OEM trigger list for the work completed. On a Ford Bronco Raptor with a windshield-mounted camera, windshield replacement or camera bracket disturbance commonly requires recalibration because small changes in bracket angle, adhesive thickness, or glass curvature can shift aim. Additional triggers include camera/radar removal and installation, bracket or mounting-surface repair, module replacement or programming, wheel alignment or steering-angle resets, tire-size or ride-height changes, and DTCs indicating lost learned values. Connecting the exact trigger to the correct OEM workflow reduces failures, prevents comebacks, and protects Ford Bronco Raptor safety performance.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
On a Ford Bronco Raptor, the strongest calibration is the one you can substantiate. Start with a pre-scan to establish a baseline across key systems: camera and radar units, ABS/ESC, steering angle, and related body or gateway modules. Capturing DTCs and system status up front identifies pre-existing faults that can derail calibration and creates a clear before record. Document the repair context in auditable terms. Note the customer complaint and warning indicators, then record VIN, mileage, and the work performed. State why calibration is required: windshield replacement on a Ford Bronco Raptor with a camera bracket, camera/radar removal and installation, bumper or grille repairs near the radar, alignment or suspension changes, module replacement or programming, or a software update that resets learned values. Capture photos of the windshield and camera bracket, sensor mounting areas, and any damage, contamination, or aftermarket modifications that could affect sensor aim. Complete the packet for verification: attach the full pre-scan output (current, pending, and history codes plus freeze-frame data when available), record scan tool brand and software level, and note the intended routine (static, dynamic, or combined) and prerequisites. Bang AutoGlass works with all carriers when comprehensive coverage applies, and documentation helps reduce claim friction while supporting our lifetime workmanship warranty.
Vehicle Readiness Checklist for Ford Bronco Raptor: Tires, Alignment, Ride Height, and Sensor/Glass Prep
Calibration accuracy depends on vehicle readiness as much as the setup. For a Ford Bronco Raptor, start with tires and wheels: confirm OEM size/spec, matched side-to-side, even tread depth, and correct inflation. Tire or pressure differences change rolling radius and steering calculations, which can affect lane keeping and adaptive cruise control. Verify wheel alignment is within OEM specifications before calibration. Toe, thrust angle, and steering angle sensor values influence camera and radar interpretation and can cause failures if out of range. Confirm ride height and loading by removing heavy cargo, keeping the spare in place, and meeting any OEM fuel-level requirement. Treat lifts/levels, non-OEM wheels, damaged springs, or unresolved collision damage as go/no-go items because they alter sensor geometry. Finish with sensor and glass prep. On a Ford Bronco Raptor with a windshield camera, inspect the bracket, verify the correct windshield and attachments, and ensure the camera view area is clean and dry with no stickers, haze, tint artifacts, or residue. Confirm wiper/cowl fitment, check radar and ultrasonic sensors are seated and unobstructed, and remove accessories that block sightlines. At Bang AutoGlass, windshield replacement typically takes 30-45 minutes; allow at least one hour of safe drive-away time before dynamic calibration driving.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
Accurate ADAS calibration on a Ford Bronco Raptor depends on disciplined setup. Verify the bay meets OEM requirements and measure the full working area for level, including where targets and stands will sit. Clean the floor so stands do not shift. Establish vehicle reference: confirm centerline and thrust line, center the steering wheel, keep the vehicle straight, and follow any OEM rules for wheel position or suspension settling. Place targets exactly as specified. Measure from the correct OEM reference points, set distances, offsets, and heights, and keep targets square to the vehicle reference with no obstructions in sensor sight lines. Control lighting and reflections: avoid bright sunlight, windshield glare, LED flicker, deep shadows, and moving reflections that can confuse camera pattern recognition. Validate tools. Use the correct target set for the system (forward camera, radar, surround-view), inspect for fading or damage, confirm measurement devices are accurate, and verify scan tool coverage for the Ford Bronco Raptor. Select the correct routine, document tool and software versions, maintain battery voltage with a maintainer, and follow OEM no-touch procedures. These controls improve first-pass success at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Ford Bronco Raptor
For a Ford Bronco Raptor, verification links completion to performance. Start with a post-repair scan as soon as the routine ends. Review camera and radar module status, clear any setup codes, and re-scan to confirm no DTCs remain current or pending. Failed-attempt or communication codes may not illuminate the dash, yet OEM and insurer processes often expect documented post-scan proof. Perform any OEM-directed road validation. If dynamic calibration is required, meet the conditions for roadway type, lane-marking quality, speed band, and minimum duration, and avoid weather or lighting restrictions that invalidate learning. Use a route with consistent lane lines and safe traffic flow. Confirm lane keeping and lane departure behave predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false warn. Validate blind spot and rear cross-traffic alerts where equipped. After windshield work on a Ford Bronco Raptor, allow cure time before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and the adhesive needs at least one hour of safe drive-away time before dynamic driving. Finish by confirming the cluster is clear. If warnings persist, recheck alignment, tire spec, ride height, sensor mounting, and glass fitment, then follow the OEM troubleshooting and recalibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Ford Bronco Raptor
Closeout records protect the driver and the claim after ADAS work on a Ford Bronco Raptor. Build a packet that can be reviewed later without context. Include the scan tool calibration report with VIN, date/time, routine identification, calibrated modules, and pass or fail outcome. Attach pre-scan and post-scan reports to document DTC status before and after service. Document prerequisites and setup with photos of sensor mounting points and the windshield or camera bracket area, plus images showing target placement when static calibration was performed. Include required measurements or alignment printouts. If the Ford Bronco Raptor required dynamic calibration or validation driving, record the OEM routine name, conditions met (speed band, duration), and confirmation that no ADAS warnings were present at completion. Log scan tool platform, software version, target or fixture set used, and battery maintainer usage for compliance and reimbursement. Provide the customer a copy with the invoice and guidance if a warning returns. Bang AutoGlass accepts all insurance companies when comprehensive coverage applies, and thorough documentation reduces back-and-forth while supporting our lifetime workmanship warranty. Retain the packet per policy for each Ford Bronco Raptor.
Services
Service Areas
ADAS Calibration Checklist for Ford Bronco Raptor: Documentation, Verification, and Final Safety Checks
Identify Ford Bronco Raptor ADAS Systems and OEM Calibration Triggers
Before any ADAS procedure on a Ford Bronco Raptor, document two items: the systems present and the OEM conditions that mandate calibration. Confirm trim and ADAS package content using VIN/build data, then perform a comprehensive diagnostic scan that lists installed ADAS-related modules and configuration details. In practical terms, validate what controls lane functions (often a forward windshield camera), what controls adaptive cruise and forward collision functions (often front radar), and what supports blind spot or parking features (rear radar, ultrasonics, and additional cameras). Where build data and scan results conflict, defer to OEM service information. Align the calibration plan to the OEM trigger list for the work completed. On a Ford Bronco Raptor with a windshield-mounted camera, windshield replacement or camera bracket disturbance commonly requires recalibration because small changes in bracket angle, adhesive thickness, or glass curvature can shift aim. Additional triggers include camera/radar removal and installation, bracket or mounting-surface repair, module replacement or programming, wheel alignment or steering-angle resets, tire-size or ride-height changes, and DTCs indicating lost learned values. Connecting the exact trigger to the correct OEM workflow reduces failures, prevents comebacks, and protects Ford Bronco Raptor safety performance.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
On a Ford Bronco Raptor, the strongest calibration is the one you can substantiate. Start with a pre-scan to establish a baseline across key systems: camera and radar units, ABS/ESC, steering angle, and related body or gateway modules. Capturing DTCs and system status up front identifies pre-existing faults that can derail calibration and creates a clear before record. Document the repair context in auditable terms. Note the customer complaint and warning indicators, then record VIN, mileage, and the work performed. State why calibration is required: windshield replacement on a Ford Bronco Raptor with a camera bracket, camera/radar removal and installation, bumper or grille repairs near the radar, alignment or suspension changes, module replacement or programming, or a software update that resets learned values. Capture photos of the windshield and camera bracket, sensor mounting areas, and any damage, contamination, or aftermarket modifications that could affect sensor aim. Complete the packet for verification: attach the full pre-scan output (current, pending, and history codes plus freeze-frame data when available), record scan tool brand and software level, and note the intended routine (static, dynamic, or combined) and prerequisites. Bang AutoGlass works with all carriers when comprehensive coverage applies, and documentation helps reduce claim friction while supporting our lifetime workmanship warranty.
Vehicle Readiness Checklist for Ford Bronco Raptor: Tires, Alignment, Ride Height, and Sensor/Glass Prep
Calibration accuracy depends on vehicle readiness as much as the setup. For a Ford Bronco Raptor, start with tires and wheels: confirm OEM size/spec, matched side-to-side, even tread depth, and correct inflation. Tire or pressure differences change rolling radius and steering calculations, which can affect lane keeping and adaptive cruise control. Verify wheel alignment is within OEM specifications before calibration. Toe, thrust angle, and steering angle sensor values influence camera and radar interpretation and can cause failures if out of range. Confirm ride height and loading by removing heavy cargo, keeping the spare in place, and meeting any OEM fuel-level requirement. Treat lifts/levels, non-OEM wheels, damaged springs, or unresolved collision damage as go/no-go items because they alter sensor geometry. Finish with sensor and glass prep. On a Ford Bronco Raptor with a windshield camera, inspect the bracket, verify the correct windshield and attachments, and ensure the camera view area is clean and dry with no stickers, haze, tint artifacts, or residue. Confirm wiper/cowl fitment, check radar and ultrasonic sensors are seated and unobstructed, and remove accessories that block sightlines. At Bang AutoGlass, windshield replacement typically takes 30-45 minutes; allow at least one hour of safe drive-away time before dynamic calibration driving.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
Accurate ADAS calibration on a Ford Bronco Raptor depends on disciplined setup. Verify the bay meets OEM requirements and measure the full working area for level, including where targets and stands will sit. Clean the floor so stands do not shift. Establish vehicle reference: confirm centerline and thrust line, center the steering wheel, keep the vehicle straight, and follow any OEM rules for wheel position or suspension settling. Place targets exactly as specified. Measure from the correct OEM reference points, set distances, offsets, and heights, and keep targets square to the vehicle reference with no obstructions in sensor sight lines. Control lighting and reflections: avoid bright sunlight, windshield glare, LED flicker, deep shadows, and moving reflections that can confuse camera pattern recognition. Validate tools. Use the correct target set for the system (forward camera, radar, surround-view), inspect for fading or damage, confirm measurement devices are accurate, and verify scan tool coverage for the Ford Bronco Raptor. Select the correct routine, document tool and software versions, maintain battery voltage with a maintainer, and follow OEM no-touch procedures. These controls improve first-pass success at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Ford Bronco Raptor
For a Ford Bronco Raptor, verification links completion to performance. Start with a post-repair scan as soon as the routine ends. Review camera and radar module status, clear any setup codes, and re-scan to confirm no DTCs remain current or pending. Failed-attempt or communication codes may not illuminate the dash, yet OEM and insurer processes often expect documented post-scan proof. Perform any OEM-directed road validation. If dynamic calibration is required, meet the conditions for roadway type, lane-marking quality, speed band, and minimum duration, and avoid weather or lighting restrictions that invalidate learning. Use a route with consistent lane lines and safe traffic flow. Confirm lane keeping and lane departure behave predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false warn. Validate blind spot and rear cross-traffic alerts where equipped. After windshield work on a Ford Bronco Raptor, allow cure time before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and the adhesive needs at least one hour of safe drive-away time before dynamic driving. Finish by confirming the cluster is clear. If warnings persist, recheck alignment, tire spec, ride height, sensor mounting, and glass fitment, then follow the OEM troubleshooting and recalibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Ford Bronco Raptor
Closeout records protect the driver and the claim after ADAS work on a Ford Bronco Raptor. Build a packet that can be reviewed later without context. Include the scan tool calibration report with VIN, date/time, routine identification, calibrated modules, and pass or fail outcome. Attach pre-scan and post-scan reports to document DTC status before and after service. Document prerequisites and setup with photos of sensor mounting points and the windshield or camera bracket area, plus images showing target placement when static calibration was performed. Include required measurements or alignment printouts. If the Ford Bronco Raptor required dynamic calibration or validation driving, record the OEM routine name, conditions met (speed band, duration), and confirmation that no ADAS warnings were present at completion. Log scan tool platform, software version, target or fixture set used, and battery maintainer usage for compliance and reimbursement. Provide the customer a copy with the invoice and guidance if a warning returns. Bang AutoGlass accepts all insurance companies when comprehensive coverage applies, and thorough documentation reduces back-and-forth while supporting our lifetime workmanship warranty. Retain the packet per policy for each Ford Bronco Raptor.
Enjoy More Relevant Blogs
Tempered vs Laminated Door Glass on Dodge Ram 2500 Regular Cab: What’s Used and Why It Matters
Tempered vs laminated door glass on Dodge Ram 2500 Regular Cab: what your vehicle uses, how it breaks, and what it means for replacement safety, cost, and cleanup.
How to Schedule ADAS Calibration for Ford F250 Super Duty Crew Cab After Windshield Replacement
Schedule ADAS calibration for Ford F250 Super Duty Crew Cab after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
After a Break-In: Dodge Challenger Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Dodge Challenger, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Will Insurance Cover Door Glass Replacement for a Ford Focus RS? Claims Steps, Deductibles, and What to Document
Will insurance cover Ford Focus RS door glass replacement? Learn claim steps, deductibles, photos to document, and how to schedule fast repairs today.
ADAS After Windshield Replacement on Gmc Terrain: Calibration Basics and Safety Checks
ADAS after Gmc Terrain windshield replacement: calibration basics, common safety checks, and how to confirm cameras and sensors are working correctly.
How to Schedule Mobile Rear Glass Replacement for Gmc Rally Wagon 2500
Schedule mobile rear glass replacement for your Gmc Rally Wagon 2500 in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Stop Leaks and Wind Noise: What Proper Dodge Durango Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Dodge Durango quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
Tempered Safety Rear Glass Replacement for Gmc Canyon Crew Cab: Understanding DOT Markings and FMVSS 205
Need Gmc Canyon Crew Cab rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Post-Install Checks for Gmc Sierra (Classic) 1500 Extended Cab: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Gmc Sierra (Classic) 1500 Extended Cab: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Fast Scheduling Guide: Gmc Sierra 3500 Hd Extended Cab Windshield Replacement From Booking to Install
Book Gmc Sierra 3500 Hd Extended Cab windshield replacement fast. See scheduling steps, what to prep, install timing, and when you can safely drive away. Get a quote today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm