Services
Service Areas
Cleanup After Quarter Window Breakage on Ford Focus St: Safe Glass Removal and Interior Protection
After a quarter window shatters on your Ford Focus St, it’s tempting to focus on replacement first, but the priority is making the cabin safe and stopping debris from spreading. Tempered quarter glass breaks into hard pellets that roll under seat rails and wedge into carpet backing. If you must drive, remove passengers and loose items, then suit up with gloves, eye protection, and closed-toe shoes. Pull the largest chunks from the opening and lower ledge and place them in a rigid box or thick bag. Next, vacuum in stages using a crevice tool—start at the headliner edge and trim seams, then seats and belt receivers, then the floor and cargo area. Avoid sweeping with a shop broom; it grinds fragments into fabric. For upholstery, press wide tape or a lint roller to collect glitter-like shards, and finish plastics with a damp microfiber that traps fines instead of moving them around. If weather is an issue, tape plastic sheeting from the inside with painter’s tape; avoid duct tape that can pull paint. When you schedule Bang AutoGlass for mobile quarter window replacement, we confirm fitment and perform a final interior glass sweep so your Ford Focus St returns to a comfortable, safe daily driver.
Verify the Correct Quarter Glass for Ford Focus St: Fixed vs Pop-Out, Tint Match, and DOT Markings
Before we install a quarter window on your Ford Focus St, we confirm the exact part and configuration so you don’t end up with a trim gap, slow leak, or a tint mismatch. First we identify the window style: fixed, urethane-bonded quarter glass versus a pop-out/vent unit with hinges, latches, and a different frame. We verify your Ford Focus St body style, model-year range, and left/right orientation. Next we match appearance—clear versus factory privacy tint, shade consistency, and how any existing film will affect the final tone. We also confirm compliance markings on the glass “bug,” including DOT and safety identifiers and the correct AS rating for non-windshield glazing. Many quarter windows are supplied as an encapsulated assembly with bonded molding, studs, locator pins, or clips; those components control seating depth, reveal lines, and how interior panels snap back in without stress. When applicable, we verify embedded features such as antenna elements so functionality is retained. The goal is an OEM-style Ford Focus St quarter window replacement that seals and looks factory. If comprehensive coverage applies, Bang AutoGlass works with all insurance companies and can assist with claim steps on-site.
Remove Trim and Old Glass: Ford Focus St Quarter Window Replacement Disassembly Checklist
Replacing the quarter window on a Ford Focus St requires disciplined disassembly: gain access cleanly, protect paint, and preserve clips so the vehicle reassembles without rattles. We begin by preparing the area—opening another door or window to reduce pressure changes, powering down accessories, and masking nearby paint and weatherstrips. From the inside, we remove only the trim needed to reach the quarter opening, which may include a rear seat bolster, quarter trim, and cargo-side panels. Non-marring tools are used throughout, and fasteners are labeled so each clip and screw returns to its original position. We’re careful around seatbelt anchors and curtain airbag zones to avoid damage and warning lights. Removal method depends on the Ford Focus St design: bonded glass is released by cutting the urethane bead without gouging the pinchweld; bolt-in or framed styles require supporting the glass as retainers are removed. After the old glass is out, we clear remaining pellets, address any distorted molding, and stage the opening with proper bond prep, including a dry fit when locator pins are used. Most mobile quarter window replacements take about 30–45 minutes for the swap, then we recommend cure time before safe drive-away.
Prep the Pinchweld and Bond Area: Corrosion Checks, Primers, and Adhesion Readiness
Prep is the quiet step that prevents loud problems later—wind noise, leaks, and rust after your Ford Focus St quarter window replacement. With bonded quarter glass, the critical surfaces are the pinchweld and the glass bond band, and both must be ready for urethane to achieve full strength. We inspect the opening for corrosion, old adhesive quality, and signs of prior bodywork that can affect fit and sealing. If we find bubbling paint or rust, we address it per refinish standards so the flange is stable, while avoiding unnecessary grinding that removes factory coatings. Next, the old urethane is reduced to a consistent, thin base layer so new urethane can chemically and mechanically bond to it. Any exposed bare metal—whether from minor damage or a previous cut—is treated and primed appropriately, and pinchweld primer is applied when the adhesive system calls for it. On the glass itself, we clean the bond area thoroughly and apply activator/primer as required to improve adhesion and provide UV protection at the bond line. Throughout the process, contamination control is strict: no household cleaners, no silicone, and no shortcuts on dry/flash times, since those are common causes of edge lifts and long-term seepage. Before final set, we test-fit the quarter glass to verify alignment, locator engagement, and molding contact, then mask the perimeter to keep the finished edge uniform. Done correctly, your Ford Focus St gets an OEM-style seal that resists water intrusion and slows corrosion over time.
Urethane Bonding and Minimum Drive-Away Time for Ford Focus St: SDAT Factors You Must Follow
Once the pinchweld is ready, urethane application dictates performance for your Ford Focus St: sealing, noise control, and long-term durability. We apply high-quality automotive urethane in a consistent, uninterrupted bead sized to the required stand-off so the quarter glass sits at the correct height relative to the body and surrounding trim. Continuity matters most at corners and transitions, where thin spots can become leak paths. After the bead is laid, we set the glass onto locator pins or stops, align it to the reveal line, and confirm uniform contact around the perimeter without shifting the bead. We then stabilize the glass and verify moldings or encapsulation are seated correctly so they do not lift while curing begins. From there, we follow Safe Drive-Away Time (SDAT) requirements for the specific adhesive system and on-site conditions. Temperature and humidity materially affect cure rate: cold, dry air typically extends cure time, while warmer, humid conditions generally shorten it, so the correct approach is to install to spec and respect published SDAT guidance. As a conservative baseline, we recommend at least one hour before driving your Ford Focus St after the quarter window replacement is completed. During early cure, avoid door slams and rough roads, and do not use a pressurized wash for 24–48 hours. When bonding is done correctly and SDAT is honored, the result is a quiet cabin, a clean reveal, and a seal that holds.
Final Quality Checks: Leak Test, Wind Noise, Trim Fit, and Documentation for Ford Focus St
Before we return your Ford Focus St, we complete quality control to confirm the quarter window replacement looks right and seals right. We start with a full visual inspection inside and outside: the quarter glass should be centered, the reveal lines should match the opposite side, and molding or encapsulation must sit flush with no corner lifts, gaps, or uneven edges. We verify urethane contact and ensure trim can seat properly without stress. Next, we confirm interior trim fitment and clip engagement so you do not inherit future buzzes, rattles, or loose panels in the quarter or cargo area. Leak prevention is validated with a controlled water test: a steady hose stream along the perimeter while we observe the interior edge and quarter cavity for moisture. If wind noise is a concern, we check perimeter contact points and trim alignment, since small edge separations can whistle at speed. We then clean the glass, remove protective tape, and ensure surrounding paint and trim are left clean and free of residue. To close out, we document part verification, DOT markings, installation notes, and aftercare, including the minimum one-hour safe drive-away time and avoiding high-pressure washes for 24–48 hours. Your paperwork reflects our lifetime workmanship warranty, and if you are filing a claim we can assist with any insurer when comprehensive coverage applies. The result is a Ford Focus St quarter window replacement that is verified, documented, and ready for normal use—often completed at your location by our mobile auto glass team.
Services
Service Areas
Cleanup After Quarter Window Breakage on Ford Focus St: Safe Glass Removal and Interior Protection
After a quarter window shatters on your Ford Focus St, it’s tempting to focus on replacement first, but the priority is making the cabin safe and stopping debris from spreading. Tempered quarter glass breaks into hard pellets that roll under seat rails and wedge into carpet backing. If you must drive, remove passengers and loose items, then suit up with gloves, eye protection, and closed-toe shoes. Pull the largest chunks from the opening and lower ledge and place them in a rigid box or thick bag. Next, vacuum in stages using a crevice tool—start at the headliner edge and trim seams, then seats and belt receivers, then the floor and cargo area. Avoid sweeping with a shop broom; it grinds fragments into fabric. For upholstery, press wide tape or a lint roller to collect glitter-like shards, and finish plastics with a damp microfiber that traps fines instead of moving them around. If weather is an issue, tape plastic sheeting from the inside with painter’s tape; avoid duct tape that can pull paint. When you schedule Bang AutoGlass for mobile quarter window replacement, we confirm fitment and perform a final interior glass sweep so your Ford Focus St returns to a comfortable, safe daily driver.
Verify the Correct Quarter Glass for Ford Focus St: Fixed vs Pop-Out, Tint Match, and DOT Markings
Before we install a quarter window on your Ford Focus St, we confirm the exact part and configuration so you don’t end up with a trim gap, slow leak, or a tint mismatch. First we identify the window style: fixed, urethane-bonded quarter glass versus a pop-out/vent unit with hinges, latches, and a different frame. We verify your Ford Focus St body style, model-year range, and left/right orientation. Next we match appearance—clear versus factory privacy tint, shade consistency, and how any existing film will affect the final tone. We also confirm compliance markings on the glass “bug,” including DOT and safety identifiers and the correct AS rating for non-windshield glazing. Many quarter windows are supplied as an encapsulated assembly with bonded molding, studs, locator pins, or clips; those components control seating depth, reveal lines, and how interior panels snap back in without stress. When applicable, we verify embedded features such as antenna elements so functionality is retained. The goal is an OEM-style Ford Focus St quarter window replacement that seals and looks factory. If comprehensive coverage applies, Bang AutoGlass works with all insurance companies and can assist with claim steps on-site.
Remove Trim and Old Glass: Ford Focus St Quarter Window Replacement Disassembly Checklist
Replacing the quarter window on a Ford Focus St requires disciplined disassembly: gain access cleanly, protect paint, and preserve clips so the vehicle reassembles without rattles. We begin by preparing the area—opening another door or window to reduce pressure changes, powering down accessories, and masking nearby paint and weatherstrips. From the inside, we remove only the trim needed to reach the quarter opening, which may include a rear seat bolster, quarter trim, and cargo-side panels. Non-marring tools are used throughout, and fasteners are labeled so each clip and screw returns to its original position. We’re careful around seatbelt anchors and curtain airbag zones to avoid damage and warning lights. Removal method depends on the Ford Focus St design: bonded glass is released by cutting the urethane bead without gouging the pinchweld; bolt-in or framed styles require supporting the glass as retainers are removed. After the old glass is out, we clear remaining pellets, address any distorted molding, and stage the opening with proper bond prep, including a dry fit when locator pins are used. Most mobile quarter window replacements take about 30–45 minutes for the swap, then we recommend cure time before safe drive-away.
Prep the Pinchweld and Bond Area: Corrosion Checks, Primers, and Adhesion Readiness
Prep is the quiet step that prevents loud problems later—wind noise, leaks, and rust after your Ford Focus St quarter window replacement. With bonded quarter glass, the critical surfaces are the pinchweld and the glass bond band, and both must be ready for urethane to achieve full strength. We inspect the opening for corrosion, old adhesive quality, and signs of prior bodywork that can affect fit and sealing. If we find bubbling paint or rust, we address it per refinish standards so the flange is stable, while avoiding unnecessary grinding that removes factory coatings. Next, the old urethane is reduced to a consistent, thin base layer so new urethane can chemically and mechanically bond to it. Any exposed bare metal—whether from minor damage or a previous cut—is treated and primed appropriately, and pinchweld primer is applied when the adhesive system calls for it. On the glass itself, we clean the bond area thoroughly and apply activator/primer as required to improve adhesion and provide UV protection at the bond line. Throughout the process, contamination control is strict: no household cleaners, no silicone, and no shortcuts on dry/flash times, since those are common causes of edge lifts and long-term seepage. Before final set, we test-fit the quarter glass to verify alignment, locator engagement, and molding contact, then mask the perimeter to keep the finished edge uniform. Done correctly, your Ford Focus St gets an OEM-style seal that resists water intrusion and slows corrosion over time.
Urethane Bonding and Minimum Drive-Away Time for Ford Focus St: SDAT Factors You Must Follow
Once the pinchweld is ready, urethane application dictates performance for your Ford Focus St: sealing, noise control, and long-term durability. We apply high-quality automotive urethane in a consistent, uninterrupted bead sized to the required stand-off so the quarter glass sits at the correct height relative to the body and surrounding trim. Continuity matters most at corners and transitions, where thin spots can become leak paths. After the bead is laid, we set the glass onto locator pins or stops, align it to the reveal line, and confirm uniform contact around the perimeter without shifting the bead. We then stabilize the glass and verify moldings or encapsulation are seated correctly so they do not lift while curing begins. From there, we follow Safe Drive-Away Time (SDAT) requirements for the specific adhesive system and on-site conditions. Temperature and humidity materially affect cure rate: cold, dry air typically extends cure time, while warmer, humid conditions generally shorten it, so the correct approach is to install to spec and respect published SDAT guidance. As a conservative baseline, we recommend at least one hour before driving your Ford Focus St after the quarter window replacement is completed. During early cure, avoid door slams and rough roads, and do not use a pressurized wash for 24–48 hours. When bonding is done correctly and SDAT is honored, the result is a quiet cabin, a clean reveal, and a seal that holds.
Final Quality Checks: Leak Test, Wind Noise, Trim Fit, and Documentation for Ford Focus St
Before we return your Ford Focus St, we complete quality control to confirm the quarter window replacement looks right and seals right. We start with a full visual inspection inside and outside: the quarter glass should be centered, the reveal lines should match the opposite side, and molding or encapsulation must sit flush with no corner lifts, gaps, or uneven edges. We verify urethane contact and ensure trim can seat properly without stress. Next, we confirm interior trim fitment and clip engagement so you do not inherit future buzzes, rattles, or loose panels in the quarter or cargo area. Leak prevention is validated with a controlled water test: a steady hose stream along the perimeter while we observe the interior edge and quarter cavity for moisture. If wind noise is a concern, we check perimeter contact points and trim alignment, since small edge separations can whistle at speed. We then clean the glass, remove protective tape, and ensure surrounding paint and trim are left clean and free of residue. To close out, we document part verification, DOT markings, installation notes, and aftercare, including the minimum one-hour safe drive-away time and avoiding high-pressure washes for 24–48 hours. Your paperwork reflects our lifetime workmanship warranty, and if you are filing a claim we can assist with any insurer when comprehensive coverage applies. The result is a Ford Focus St quarter window replacement that is verified, documented, and ready for normal use—often completed at your location by our mobile auto glass team.
Services
Service Areas
Cleanup After Quarter Window Breakage on Ford Focus St: Safe Glass Removal and Interior Protection
After a quarter window shatters on your Ford Focus St, it’s tempting to focus on replacement first, but the priority is making the cabin safe and stopping debris from spreading. Tempered quarter glass breaks into hard pellets that roll under seat rails and wedge into carpet backing. If you must drive, remove passengers and loose items, then suit up with gloves, eye protection, and closed-toe shoes. Pull the largest chunks from the opening and lower ledge and place them in a rigid box or thick bag. Next, vacuum in stages using a crevice tool—start at the headliner edge and trim seams, then seats and belt receivers, then the floor and cargo area. Avoid sweeping with a shop broom; it grinds fragments into fabric. For upholstery, press wide tape or a lint roller to collect glitter-like shards, and finish plastics with a damp microfiber that traps fines instead of moving them around. If weather is an issue, tape plastic sheeting from the inside with painter’s tape; avoid duct tape that can pull paint. When you schedule Bang AutoGlass for mobile quarter window replacement, we confirm fitment and perform a final interior glass sweep so your Ford Focus St returns to a comfortable, safe daily driver.
Verify the Correct Quarter Glass for Ford Focus St: Fixed vs Pop-Out, Tint Match, and DOT Markings
Before we install a quarter window on your Ford Focus St, we confirm the exact part and configuration so you don’t end up with a trim gap, slow leak, or a tint mismatch. First we identify the window style: fixed, urethane-bonded quarter glass versus a pop-out/vent unit with hinges, latches, and a different frame. We verify your Ford Focus St body style, model-year range, and left/right orientation. Next we match appearance—clear versus factory privacy tint, shade consistency, and how any existing film will affect the final tone. We also confirm compliance markings on the glass “bug,” including DOT and safety identifiers and the correct AS rating for non-windshield glazing. Many quarter windows are supplied as an encapsulated assembly with bonded molding, studs, locator pins, or clips; those components control seating depth, reveal lines, and how interior panels snap back in without stress. When applicable, we verify embedded features such as antenna elements so functionality is retained. The goal is an OEM-style Ford Focus St quarter window replacement that seals and looks factory. If comprehensive coverage applies, Bang AutoGlass works with all insurance companies and can assist with claim steps on-site.
Remove Trim and Old Glass: Ford Focus St Quarter Window Replacement Disassembly Checklist
Replacing the quarter window on a Ford Focus St requires disciplined disassembly: gain access cleanly, protect paint, and preserve clips so the vehicle reassembles without rattles. We begin by preparing the area—opening another door or window to reduce pressure changes, powering down accessories, and masking nearby paint and weatherstrips. From the inside, we remove only the trim needed to reach the quarter opening, which may include a rear seat bolster, quarter trim, and cargo-side panels. Non-marring tools are used throughout, and fasteners are labeled so each clip and screw returns to its original position. We’re careful around seatbelt anchors and curtain airbag zones to avoid damage and warning lights. Removal method depends on the Ford Focus St design: bonded glass is released by cutting the urethane bead without gouging the pinchweld; bolt-in or framed styles require supporting the glass as retainers are removed. After the old glass is out, we clear remaining pellets, address any distorted molding, and stage the opening with proper bond prep, including a dry fit when locator pins are used. Most mobile quarter window replacements take about 30–45 minutes for the swap, then we recommend cure time before safe drive-away.
Prep the Pinchweld and Bond Area: Corrosion Checks, Primers, and Adhesion Readiness
Prep is the quiet step that prevents loud problems later—wind noise, leaks, and rust after your Ford Focus St quarter window replacement. With bonded quarter glass, the critical surfaces are the pinchweld and the glass bond band, and both must be ready for urethane to achieve full strength. We inspect the opening for corrosion, old adhesive quality, and signs of prior bodywork that can affect fit and sealing. If we find bubbling paint or rust, we address it per refinish standards so the flange is stable, while avoiding unnecessary grinding that removes factory coatings. Next, the old urethane is reduced to a consistent, thin base layer so new urethane can chemically and mechanically bond to it. Any exposed bare metal—whether from minor damage or a previous cut—is treated and primed appropriately, and pinchweld primer is applied when the adhesive system calls for it. On the glass itself, we clean the bond area thoroughly and apply activator/primer as required to improve adhesion and provide UV protection at the bond line. Throughout the process, contamination control is strict: no household cleaners, no silicone, and no shortcuts on dry/flash times, since those are common causes of edge lifts and long-term seepage. Before final set, we test-fit the quarter glass to verify alignment, locator engagement, and molding contact, then mask the perimeter to keep the finished edge uniform. Done correctly, your Ford Focus St gets an OEM-style seal that resists water intrusion and slows corrosion over time.
Urethane Bonding and Minimum Drive-Away Time for Ford Focus St: SDAT Factors You Must Follow
Once the pinchweld is ready, urethane application dictates performance for your Ford Focus St: sealing, noise control, and long-term durability. We apply high-quality automotive urethane in a consistent, uninterrupted bead sized to the required stand-off so the quarter glass sits at the correct height relative to the body and surrounding trim. Continuity matters most at corners and transitions, where thin spots can become leak paths. After the bead is laid, we set the glass onto locator pins or stops, align it to the reveal line, and confirm uniform contact around the perimeter without shifting the bead. We then stabilize the glass and verify moldings or encapsulation are seated correctly so they do not lift while curing begins. From there, we follow Safe Drive-Away Time (SDAT) requirements for the specific adhesive system and on-site conditions. Temperature and humidity materially affect cure rate: cold, dry air typically extends cure time, while warmer, humid conditions generally shorten it, so the correct approach is to install to spec and respect published SDAT guidance. As a conservative baseline, we recommend at least one hour before driving your Ford Focus St after the quarter window replacement is completed. During early cure, avoid door slams and rough roads, and do not use a pressurized wash for 24–48 hours. When bonding is done correctly and SDAT is honored, the result is a quiet cabin, a clean reveal, and a seal that holds.
Final Quality Checks: Leak Test, Wind Noise, Trim Fit, and Documentation for Ford Focus St
Before we return your Ford Focus St, we complete quality control to confirm the quarter window replacement looks right and seals right. We start with a full visual inspection inside and outside: the quarter glass should be centered, the reveal lines should match the opposite side, and molding or encapsulation must sit flush with no corner lifts, gaps, or uneven edges. We verify urethane contact and ensure trim can seat properly without stress. Next, we confirm interior trim fitment and clip engagement so you do not inherit future buzzes, rattles, or loose panels in the quarter or cargo area. Leak prevention is validated with a controlled water test: a steady hose stream along the perimeter while we observe the interior edge and quarter cavity for moisture. If wind noise is a concern, we check perimeter contact points and trim alignment, since small edge separations can whistle at speed. We then clean the glass, remove protective tape, and ensure surrounding paint and trim are left clean and free of residue. To close out, we document part verification, DOT markings, installation notes, and aftercare, including the minimum one-hour safe drive-away time and avoiding high-pressure washes for 24–48 hours. Your paperwork reflects our lifetime workmanship warranty, and if you are filing a claim we can assist with any insurer when comprehensive coverage applies. The result is a Ford Focus St quarter window replacement that is verified, documented, and ready for normal use—often completed at your location by our mobile auto glass team.
Enjoy More Relevant Blogs
Tempered vs Laminated Door Glass on Dodge Ram 2500 Regular Cab: What’s Used and Why It Matters
Tempered vs laminated door glass on Dodge Ram 2500 Regular Cab: what your vehicle uses, how it breaks, and what it means for replacement safety, cost, and cleanup.
How to Schedule ADAS Calibration for Ford F250 Super Duty Crew Cab After Windshield Replacement
Schedule ADAS calibration for Ford F250 Super Duty Crew Cab after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
After a Break-In: Dodge Challenger Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Dodge Challenger, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Will Insurance Cover Door Glass Replacement for a Ford Focus RS? Claims Steps, Deductibles, and What to Document
Will insurance cover Ford Focus RS door glass replacement? Learn claim steps, deductibles, photos to document, and how to schedule fast repairs today.
ADAS After Windshield Replacement on Gmc Terrain: Calibration Basics and Safety Checks
ADAS after Gmc Terrain windshield replacement: calibration basics, common safety checks, and how to confirm cameras and sensors are working correctly.
How to Schedule Mobile Rear Glass Replacement for Gmc Rally Wagon 2500
Schedule mobile rear glass replacement for your Gmc Rally Wagon 2500 in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Stop Leaks and Wind Noise: What Proper Dodge Durango Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Dodge Durango quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
Tempered Safety Rear Glass Replacement for Gmc Canyon Crew Cab: Understanding DOT Markings and FMVSS 205
Need Gmc Canyon Crew Cab rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Post-Install Checks for Gmc Sierra (Classic) 1500 Extended Cab: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Gmc Sierra (Classic) 1500 Extended Cab: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Fast Scheduling Guide: Gmc Sierra 3500 Hd Extended Cab Windshield Replacement From Booking to Install
Book Gmc Sierra 3500 Hd Extended Cab windshield replacement fast. See scheduling steps, what to prep, install timing, and when you can safely drive away. Get a quote today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm