Services
Service Areas
Tempered Safety Rear Glass Replacement for Gmc Sierra 2500 Extended Cab: Understanding DOT Markings and FMVSS 205
What FMVSS 205 Covers for Gmc Sierra 2500 Extended Cab Rear Glass: Safety Glazing Scope and Purpose
FMVSS 205 (49 CFR 571.205) is the U.S. Federal Motor Vehicle Safety Standard for glazing materials, including the rear glass on your Gmc Sierra 2500 Extended Cab. It aims to reduce injuries from impacts with glass, preserve required transparency for rear visibility, and ensure glazing behaves predictably in a collision to help limit ejection. FMVSS 205 incorporates ANSI/SAE Z26.1, which assigns glazing "Item" classifications and performance levels and ties them to where the glass may be installed (windshield, side, or rear). The rule also requires permanent, traceable markings on each regulated piece of glass—typically a DOT symbol, an NHTSA-assigned manufacturer code, and additional Z26.1 identifiers. For a Gmc Sierra 2500 Extended Cab rear window replacement, matching the part certification and intended location matters as much as matching the shape. The correct back glass should show compliant safety glazing markings, support your defroster grid and any embedded antenna, and match factory tint/shading. At Bang AutoGlass, we verify the stamp and specifications before installation, then provide mobile service as soon as next day. Most rear glass jobs take 30–45 minutes, with a recommended minimum one-hour urethane cure time before drive-away.
Tempered Safety Rear Glass on Gmc Sierra 2500 Extended Cab: What “Tempered” Means and Why It’s Used
Rear windows on a Gmc Sierra 2500 Extended Cab are commonly tempered safety glazing, produced through controlled heating and rapid quenching. That process creates compressive stress at the surfaces, increasing strength compared with annealed glass and helping the window tolerate normal flex and vibration. The defining safety characteristic is how it fails: tempered glass is designed to crumble into many small, blunt granules rather than long, sharp shards, which reduces severe lacerations. This is why tempered glazing is widely used for side and rear openings, while windshields are typically laminated to keep the glass bonded together after impact. Tempered rear glass also integrates well with printed defroster grids, ceramic frit borders, and certain Gmc Sierra 2500 Extended Cab trims that include embedded antenna lines. The downside is repairability: chips or cracks can propagate quickly, and once the stress balance is disturbed the panel may shatter, so replacement is standard. Bang AutoGlass focuses on OEM-style fit, correct DOT/FMVSS glazing markings, and a clean urethane bond so the glass seats evenly and the defroster performs as intended. Our mobile service can often be scheduled as soon as next day, and installations are backed by a lifetime workmanship warranty.
How to Read the Rear Glass Stamp: DOT Symbol, NHTSA Manufacturer Code, and Certification Marks
Every compliant piece of automotive glazing has a permanent stamp or etching, and reading it helps confirm you are ordering the correct rear glass for your Gmc Sierra 2500 Extended Cab. FMVSS 205 requires certification marks, typically including a DOT symbol and a DOT number tied to an NHTSA-assigned manufacturer code, plus additional markings referenced from ANSI/SAE Z26.1. On most rear windows you will also see a manufacturer logo, an AS designation and/or Item code that signals the glazing category, and a material callout such as TEMPERED or TEMP. Many stamps add secondary identifiers like plant or batch codes and a date code, but formats vary by maker. For rear window replacement, focus on the essentials: the DOT mark should be present, the Z26.1-based designation should be appropriate for a rear opening, and the glass should match Gmc Sierra 2500 Extended Cab options such as the defroster grid pattern, antenna lines, and privacy tint. Bang AutoGlass recommends taking a clear photo of the existing stamp and connectors before removal; we use it to confirm the correct part and to document the compliant replacement in your records.
ANSI/SAE Z26.1 Item and AS Markings: What the Codes Indicate and Where They Can Be Used
When you check the stamp on your Gmc Sierra 2500 Extended Cab rear glass, you’ll often see two marking systems together: an ANSI/SAE Z26.1 “Item” classification and an “AS” (American Standard) code. The Item number is the Z26.1 performance bucket (impact resistance, abrasion, and—on tempered glass—how it fragments when broken). The AS code is the required glazing identification used with FMVSS 205 to show where that glazing may be installed. Most rear windows are tempered safety glazing, so the stamp often includes “Tempered” plus an AS code such as AS2 or AS3. A key concept in FMVSS 205 interpretations is visible light transmittance: NHTSA has stated that AS3 glass is under 70% light transmission and is limited to areas not “requisite for driving visibility,” while areas requisite for visibility generally need at least 70%. That means the correct AS marking depends on vehicle class and window location—not just the glass shape. For your Gmc Sierra 2500 Extended Cab rear glass replacement, verifying the DOT/AS markings helps avoid compliance issues, poor visibility, and inspection headaches. At Bang AutoGlass, our mobile team confirms the stamp and glazing type before install so your back glass replacement is correct, compliant, and road-ready.
Ordering the Correct Gmc Sierra 2500 Extended Cab Rear Glass: Defroster Grid, Antenna Lines, Tint, and Compliance Checks
Ordering the correct Gmc Sierra 2500 Extended Cab rear glass is more than matching the outline. A proper rear windshield replacement must match equipment features and the compliance stamp. First, confirm model year, trim, and body style (sedan, hatchback, SUV) because those can change the glass and molding system. Next, verify functional features: a rear defroster grid, embedded antenna lines, or both. The defroster pattern and electrical tab locations must match your harness, and the right antenna layout helps prevent weak reception. Then match appearance: clear vs. privacy/solar tint and any factory color tone (often green or gray). Also confirm fitment details such as rear wiper holes, bracket points, molding profile, and the location of defroster connectors. Finally, check certification. FMVSS 205 requires replacement glazing to meet the same applicable requirements as the original, so the new glass should carry the proper DOT code and ANSI/SAE Z26.1 markings for a rear window. A quick photo of the old stamp and connector layout before removal can save time and returns. Bang AutoGlass handles these checks, sources the correct tempered safety rear glass for your Gmc Sierra 2500 Extended Cab, and brings mobile auto glass replacement to your location with insurance-friendly paperwork when comprehensive coverage applies.
Documentation and Post-Install Verification: Marking Photos, Defroster Testing, and Quality Checks
For a Gmc Sierra 2500 Extended Cab rear glass replacement, the last step isn’t just setting the tempered safety glass—it’s verifying performance and keeping a record. We recommend (and do automatically) taking clear photos of the old stamp before removal and the new stamp after installation. FMVSS 205 relies on permanent glazing identification, including the DOT symbol and a manufacturer code, so photos make it easy to confirm the back glass is properly marked later. Next, test functions before interior trim is finalized. Confirm the defroster tabs are fully seated, the harness is secure, and the rear window defroster heats evenly. If your Gmc Sierra 2500 Extended Cab uses embedded antenna lines, confirm the correct glass pattern and connector hookup so radio reception stays strong. Then complete workmanship checks that protect you long term: centered alignment in the opening, continuous urethane bead contact, clean molding fit, and a practical leak and wind-noise check after reassembly. Bang AutoGlass typically completes mobile rear glass replacements in about 30–45 minutes, and we recommend at least one hour of cure time before normal driving. Every install is backed by our lifetime workmanship warranty, and we can work with any insurance company when comprehensive coverage applies.
Services
Service Areas
Tempered Safety Rear Glass Replacement for Gmc Sierra 2500 Extended Cab: Understanding DOT Markings and FMVSS 205
What FMVSS 205 Covers for Gmc Sierra 2500 Extended Cab Rear Glass: Safety Glazing Scope and Purpose
FMVSS 205 (49 CFR 571.205) is the U.S. Federal Motor Vehicle Safety Standard for glazing materials, including the rear glass on your Gmc Sierra 2500 Extended Cab. It aims to reduce injuries from impacts with glass, preserve required transparency for rear visibility, and ensure glazing behaves predictably in a collision to help limit ejection. FMVSS 205 incorporates ANSI/SAE Z26.1, which assigns glazing "Item" classifications and performance levels and ties them to where the glass may be installed (windshield, side, or rear). The rule also requires permanent, traceable markings on each regulated piece of glass—typically a DOT symbol, an NHTSA-assigned manufacturer code, and additional Z26.1 identifiers. For a Gmc Sierra 2500 Extended Cab rear window replacement, matching the part certification and intended location matters as much as matching the shape. The correct back glass should show compliant safety glazing markings, support your defroster grid and any embedded antenna, and match factory tint/shading. At Bang AutoGlass, we verify the stamp and specifications before installation, then provide mobile service as soon as next day. Most rear glass jobs take 30–45 minutes, with a recommended minimum one-hour urethane cure time before drive-away.
Tempered Safety Rear Glass on Gmc Sierra 2500 Extended Cab: What “Tempered” Means and Why It’s Used
Rear windows on a Gmc Sierra 2500 Extended Cab are commonly tempered safety glazing, produced through controlled heating and rapid quenching. That process creates compressive stress at the surfaces, increasing strength compared with annealed glass and helping the window tolerate normal flex and vibration. The defining safety characteristic is how it fails: tempered glass is designed to crumble into many small, blunt granules rather than long, sharp shards, which reduces severe lacerations. This is why tempered glazing is widely used for side and rear openings, while windshields are typically laminated to keep the glass bonded together after impact. Tempered rear glass also integrates well with printed defroster grids, ceramic frit borders, and certain Gmc Sierra 2500 Extended Cab trims that include embedded antenna lines. The downside is repairability: chips or cracks can propagate quickly, and once the stress balance is disturbed the panel may shatter, so replacement is standard. Bang AutoGlass focuses on OEM-style fit, correct DOT/FMVSS glazing markings, and a clean urethane bond so the glass seats evenly and the defroster performs as intended. Our mobile service can often be scheduled as soon as next day, and installations are backed by a lifetime workmanship warranty.
How to Read the Rear Glass Stamp: DOT Symbol, NHTSA Manufacturer Code, and Certification Marks
Every compliant piece of automotive glazing has a permanent stamp or etching, and reading it helps confirm you are ordering the correct rear glass for your Gmc Sierra 2500 Extended Cab. FMVSS 205 requires certification marks, typically including a DOT symbol and a DOT number tied to an NHTSA-assigned manufacturer code, plus additional markings referenced from ANSI/SAE Z26.1. On most rear windows you will also see a manufacturer logo, an AS designation and/or Item code that signals the glazing category, and a material callout such as TEMPERED or TEMP. Many stamps add secondary identifiers like plant or batch codes and a date code, but formats vary by maker. For rear window replacement, focus on the essentials: the DOT mark should be present, the Z26.1-based designation should be appropriate for a rear opening, and the glass should match Gmc Sierra 2500 Extended Cab options such as the defroster grid pattern, antenna lines, and privacy tint. Bang AutoGlass recommends taking a clear photo of the existing stamp and connectors before removal; we use it to confirm the correct part and to document the compliant replacement in your records.
ANSI/SAE Z26.1 Item and AS Markings: What the Codes Indicate and Where They Can Be Used
When you check the stamp on your Gmc Sierra 2500 Extended Cab rear glass, you’ll often see two marking systems together: an ANSI/SAE Z26.1 “Item” classification and an “AS” (American Standard) code. The Item number is the Z26.1 performance bucket (impact resistance, abrasion, and—on tempered glass—how it fragments when broken). The AS code is the required glazing identification used with FMVSS 205 to show where that glazing may be installed. Most rear windows are tempered safety glazing, so the stamp often includes “Tempered” plus an AS code such as AS2 or AS3. A key concept in FMVSS 205 interpretations is visible light transmittance: NHTSA has stated that AS3 glass is under 70% light transmission and is limited to areas not “requisite for driving visibility,” while areas requisite for visibility generally need at least 70%. That means the correct AS marking depends on vehicle class and window location—not just the glass shape. For your Gmc Sierra 2500 Extended Cab rear glass replacement, verifying the DOT/AS markings helps avoid compliance issues, poor visibility, and inspection headaches. At Bang AutoGlass, our mobile team confirms the stamp and glazing type before install so your back glass replacement is correct, compliant, and road-ready.
Ordering the Correct Gmc Sierra 2500 Extended Cab Rear Glass: Defroster Grid, Antenna Lines, Tint, and Compliance Checks
Ordering the correct Gmc Sierra 2500 Extended Cab rear glass is more than matching the outline. A proper rear windshield replacement must match equipment features and the compliance stamp. First, confirm model year, trim, and body style (sedan, hatchback, SUV) because those can change the glass and molding system. Next, verify functional features: a rear defroster grid, embedded antenna lines, or both. The defroster pattern and electrical tab locations must match your harness, and the right antenna layout helps prevent weak reception. Then match appearance: clear vs. privacy/solar tint and any factory color tone (often green or gray). Also confirm fitment details such as rear wiper holes, bracket points, molding profile, and the location of defroster connectors. Finally, check certification. FMVSS 205 requires replacement glazing to meet the same applicable requirements as the original, so the new glass should carry the proper DOT code and ANSI/SAE Z26.1 markings for a rear window. A quick photo of the old stamp and connector layout before removal can save time and returns. Bang AutoGlass handles these checks, sources the correct tempered safety rear glass for your Gmc Sierra 2500 Extended Cab, and brings mobile auto glass replacement to your location with insurance-friendly paperwork when comprehensive coverage applies.
Documentation and Post-Install Verification: Marking Photos, Defroster Testing, and Quality Checks
For a Gmc Sierra 2500 Extended Cab rear glass replacement, the last step isn’t just setting the tempered safety glass—it’s verifying performance and keeping a record. We recommend (and do automatically) taking clear photos of the old stamp before removal and the new stamp after installation. FMVSS 205 relies on permanent glazing identification, including the DOT symbol and a manufacturer code, so photos make it easy to confirm the back glass is properly marked later. Next, test functions before interior trim is finalized. Confirm the defroster tabs are fully seated, the harness is secure, and the rear window defroster heats evenly. If your Gmc Sierra 2500 Extended Cab uses embedded antenna lines, confirm the correct glass pattern and connector hookup so radio reception stays strong. Then complete workmanship checks that protect you long term: centered alignment in the opening, continuous urethane bead contact, clean molding fit, and a practical leak and wind-noise check after reassembly. Bang AutoGlass typically completes mobile rear glass replacements in about 30–45 minutes, and we recommend at least one hour of cure time before normal driving. Every install is backed by our lifetime workmanship warranty, and we can work with any insurance company when comprehensive coverage applies.
Services
Service Areas
Tempered Safety Rear Glass Replacement for Gmc Sierra 2500 Extended Cab: Understanding DOT Markings and FMVSS 205
What FMVSS 205 Covers for Gmc Sierra 2500 Extended Cab Rear Glass: Safety Glazing Scope and Purpose
FMVSS 205 (49 CFR 571.205) is the U.S. Federal Motor Vehicle Safety Standard for glazing materials, including the rear glass on your Gmc Sierra 2500 Extended Cab. It aims to reduce injuries from impacts with glass, preserve required transparency for rear visibility, and ensure glazing behaves predictably in a collision to help limit ejection. FMVSS 205 incorporates ANSI/SAE Z26.1, which assigns glazing "Item" classifications and performance levels and ties them to where the glass may be installed (windshield, side, or rear). The rule also requires permanent, traceable markings on each regulated piece of glass—typically a DOT symbol, an NHTSA-assigned manufacturer code, and additional Z26.1 identifiers. For a Gmc Sierra 2500 Extended Cab rear window replacement, matching the part certification and intended location matters as much as matching the shape. The correct back glass should show compliant safety glazing markings, support your defroster grid and any embedded antenna, and match factory tint/shading. At Bang AutoGlass, we verify the stamp and specifications before installation, then provide mobile service as soon as next day. Most rear glass jobs take 30–45 minutes, with a recommended minimum one-hour urethane cure time before drive-away.
Tempered Safety Rear Glass on Gmc Sierra 2500 Extended Cab: What “Tempered” Means and Why It’s Used
Rear windows on a Gmc Sierra 2500 Extended Cab are commonly tempered safety glazing, produced through controlled heating and rapid quenching. That process creates compressive stress at the surfaces, increasing strength compared with annealed glass and helping the window tolerate normal flex and vibration. The defining safety characteristic is how it fails: tempered glass is designed to crumble into many small, blunt granules rather than long, sharp shards, which reduces severe lacerations. This is why tempered glazing is widely used for side and rear openings, while windshields are typically laminated to keep the glass bonded together after impact. Tempered rear glass also integrates well with printed defroster grids, ceramic frit borders, and certain Gmc Sierra 2500 Extended Cab trims that include embedded antenna lines. The downside is repairability: chips or cracks can propagate quickly, and once the stress balance is disturbed the panel may shatter, so replacement is standard. Bang AutoGlass focuses on OEM-style fit, correct DOT/FMVSS glazing markings, and a clean urethane bond so the glass seats evenly and the defroster performs as intended. Our mobile service can often be scheduled as soon as next day, and installations are backed by a lifetime workmanship warranty.
How to Read the Rear Glass Stamp: DOT Symbol, NHTSA Manufacturer Code, and Certification Marks
Every compliant piece of automotive glazing has a permanent stamp or etching, and reading it helps confirm you are ordering the correct rear glass for your Gmc Sierra 2500 Extended Cab. FMVSS 205 requires certification marks, typically including a DOT symbol and a DOT number tied to an NHTSA-assigned manufacturer code, plus additional markings referenced from ANSI/SAE Z26.1. On most rear windows you will also see a manufacturer logo, an AS designation and/or Item code that signals the glazing category, and a material callout such as TEMPERED or TEMP. Many stamps add secondary identifiers like plant or batch codes and a date code, but formats vary by maker. For rear window replacement, focus on the essentials: the DOT mark should be present, the Z26.1-based designation should be appropriate for a rear opening, and the glass should match Gmc Sierra 2500 Extended Cab options such as the defroster grid pattern, antenna lines, and privacy tint. Bang AutoGlass recommends taking a clear photo of the existing stamp and connectors before removal; we use it to confirm the correct part and to document the compliant replacement in your records.
ANSI/SAE Z26.1 Item and AS Markings: What the Codes Indicate and Where They Can Be Used
When you check the stamp on your Gmc Sierra 2500 Extended Cab rear glass, you’ll often see two marking systems together: an ANSI/SAE Z26.1 “Item” classification and an “AS” (American Standard) code. The Item number is the Z26.1 performance bucket (impact resistance, abrasion, and—on tempered glass—how it fragments when broken). The AS code is the required glazing identification used with FMVSS 205 to show where that glazing may be installed. Most rear windows are tempered safety glazing, so the stamp often includes “Tempered” plus an AS code such as AS2 or AS3. A key concept in FMVSS 205 interpretations is visible light transmittance: NHTSA has stated that AS3 glass is under 70% light transmission and is limited to areas not “requisite for driving visibility,” while areas requisite for visibility generally need at least 70%. That means the correct AS marking depends on vehicle class and window location—not just the glass shape. For your Gmc Sierra 2500 Extended Cab rear glass replacement, verifying the DOT/AS markings helps avoid compliance issues, poor visibility, and inspection headaches. At Bang AutoGlass, our mobile team confirms the stamp and glazing type before install so your back glass replacement is correct, compliant, and road-ready.
Ordering the Correct Gmc Sierra 2500 Extended Cab Rear Glass: Defroster Grid, Antenna Lines, Tint, and Compliance Checks
Ordering the correct Gmc Sierra 2500 Extended Cab rear glass is more than matching the outline. A proper rear windshield replacement must match equipment features and the compliance stamp. First, confirm model year, trim, and body style (sedan, hatchback, SUV) because those can change the glass and molding system. Next, verify functional features: a rear defroster grid, embedded antenna lines, or both. The defroster pattern and electrical tab locations must match your harness, and the right antenna layout helps prevent weak reception. Then match appearance: clear vs. privacy/solar tint and any factory color tone (often green or gray). Also confirm fitment details such as rear wiper holes, bracket points, molding profile, and the location of defroster connectors. Finally, check certification. FMVSS 205 requires replacement glazing to meet the same applicable requirements as the original, so the new glass should carry the proper DOT code and ANSI/SAE Z26.1 markings for a rear window. A quick photo of the old stamp and connector layout before removal can save time and returns. Bang AutoGlass handles these checks, sources the correct tempered safety rear glass for your Gmc Sierra 2500 Extended Cab, and brings mobile auto glass replacement to your location with insurance-friendly paperwork when comprehensive coverage applies.
Documentation and Post-Install Verification: Marking Photos, Defroster Testing, and Quality Checks
For a Gmc Sierra 2500 Extended Cab rear glass replacement, the last step isn’t just setting the tempered safety glass—it’s verifying performance and keeping a record. We recommend (and do automatically) taking clear photos of the old stamp before removal and the new stamp after installation. FMVSS 205 relies on permanent glazing identification, including the DOT symbol and a manufacturer code, so photos make it easy to confirm the back glass is properly marked later. Next, test functions before interior trim is finalized. Confirm the defroster tabs are fully seated, the harness is secure, and the rear window defroster heats evenly. If your Gmc Sierra 2500 Extended Cab uses embedded antenna lines, confirm the correct glass pattern and connector hookup so radio reception stays strong. Then complete workmanship checks that protect you long term: centered alignment in the opening, continuous urethane bead contact, clean molding fit, and a practical leak and wind-noise check after reassembly. Bang AutoGlass typically completes mobile rear glass replacements in about 30–45 minutes, and we recommend at least one hour of cure time before normal driving. Every install is backed by our lifetime workmanship warranty, and we can work with any insurance company when comprehensive coverage applies.
Enjoy More Relevant Blogs
Tempered vs Laminated Door Glass on Dodge Ram 2500 Regular Cab: What’s Used and Why It Matters
Tempered vs laminated door glass on Dodge Ram 2500 Regular Cab: what your vehicle uses, how it breaks, and what it means for replacement safety, cost, and cleanup.
How to Schedule ADAS Calibration for Ford F250 Super Duty Crew Cab After Windshield Replacement
Schedule ADAS calibration for Ford F250 Super Duty Crew Cab after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
After a Break-In: Dodge Challenger Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Dodge Challenger, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Will Insurance Cover Door Glass Replacement for a Ford Focus RS? Claims Steps, Deductibles, and What to Document
Will insurance cover Ford Focus RS door glass replacement? Learn claim steps, deductibles, photos to document, and how to schedule fast repairs today.
ADAS After Windshield Replacement on Gmc Terrain: Calibration Basics and Safety Checks
ADAS after Gmc Terrain windshield replacement: calibration basics, common safety checks, and how to confirm cameras and sensors are working correctly.
How to Schedule Mobile Rear Glass Replacement for Gmc Rally Wagon 2500
Schedule mobile rear glass replacement for your Gmc Rally Wagon 2500 in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Stop Leaks and Wind Noise: What Proper Dodge Durango Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Dodge Durango quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
Tempered Safety Rear Glass Replacement for Gmc Canyon Crew Cab: Understanding DOT Markings and FMVSS 205
Need Gmc Canyon Crew Cab rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Post-Install Checks for Gmc Sierra (Classic) 1500 Extended Cab: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Gmc Sierra (Classic) 1500 Extended Cab: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Fast Scheduling Guide: Gmc Sierra 3500 Hd Extended Cab Windshield Replacement From Booking to Install
Book Gmc Sierra 3500 Hd Extended Cab windshield replacement fast. See scheduling steps, what to prep, install timing, and when you can safely drive away. Get a quote today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm