Services
Service Areas
Do You Need ADAS Calibration for Toyota 4runner After a Wheel Alignment? When Alignment Changes Affect Cameras and Radar
For a Toyota 4runner, an alignment is not purely mechanical; it can change how ADAS interprets the vehicle’s path. Lane-keeping assist and lane departure warning depend on the forward camera’s view of lane lines, but that camera also assumes the car’s calibrated centerline and steering angle sensor (SAS) baseline are correct. Adaptive cruise control (ACC) and automatic emergency braking (AEB) similarly assume the radar/camera are aimed relative to the true direction of travel. If toe, camber, caster, or thrust line is adjusted, the Toyota 4runner may travel on a slightly different angle than before, and OEM procedures often require a pre-scan, SAS reset/relearn, and an ADAS calibration verification. Depending on the package, the process may be static (targets positioned at measured distances on a level floor), dynamic (scan-tool guided road routine), or both. After any four-wheel alignment, ask whether the shop completed a post-scan and documented any required camera calibration, radar calibration, or steering angle reset. Skipping those steps can lead to “soft” issues—lane centering that drifts, ACC following that feels inconsistent, or alerts that trigger too early or too late. If you search "Toyota 4runner ADAS calibration after alignment" or "ADAS calibration near me," prioritize providers that document alignment specs and calibration outcomes.
Toyota 4runner ADAS Calibration After Suspension Work: Ride Height, Steering Angle Sensors, and Why Pricing Varies
Suspension or steering work on a Toyota 4runner—struts, shocks, springs, control arms, ball joints, tie rods, or steering components—often justifies an ADAS calibration check because these repairs change ride height and alignment geometry. ADAS sensors don’t “approximate” the road; they convert camera and radar views into precise angles and distances. A small change in ride height can tilt the forward camera (pitch/yaw) and alter radar aim, while changes in toe and thrust angle affect how the vehicle’s calibrated centerline matches its real path. Those mechanical shifts also influence how the steering angle sensor (SAS), yaw-rate sensor, and wheel-speed inputs are interpreted for lane-centering and ACC distance control. Many OEM workflows for a Toyota 4runner set prerequisites before recalibration: verify tire size/pressure, confirm ride height, inspect for looseness, and complete a four-wheel alignment within spec. Only then are camera calibration, radar calibration, or a steering angle reset considered valid. Pricing varies because the work varies—some trims need only a dynamic road routine, others require static targets, and some require both, plus multiple systems (front camera, front radar, blind-spot or parking sensors) to be checked. For best results, treat calibration as the final step and request the printed calibration report.
ADAS Calibration for Toyota 4runner After a Minor Collision: Even Without Visible Damage, Sensors Can Shift
ADAS calibration after a minor collision on your Toyota 4runner is easy to overlook because the vehicle may look fine. Cameras and radar sensors are mounted to tight tolerances, and a low-speed bumper tap, parking-lot impact, or curb strike can shift a bracket behind the bumper cover or disturb a camera mount—sometimes only millimeters. That small change can alter radar aim or camera perspective enough to affect ACC, AEB, lane-keeping assist, and forward collision warning. Misalignment also doesn’t always trigger a dash light; some systems store diagnostic trouble codes that only appear on a scan, while others keep working with reduced accuracy until you notice false alerts or inconsistent following distance. After any impact involving the bumper, grille, windshield/camera area, or suspension, prioritize a diagnostic pre-scan and post-scan plus any OEM-required aiming/calibration (static targets, dynamic road routine, or both). Keep the calibration report with your repair and insurance paperwork. If the incident also damaged your windshield, Bang AutoGlass can provide mobile replacement when scheduling allows. Most installs take 30–45 minutes; plan at least one hour of safe drive time for adhesive cure. We can also point you to the appropriate calibration resource.
Signs Your Toyota 4runner ADAS Needs Calibration: Warning Lights, Lane-Keeping Pull, ACC Issues, and False Alerts
On a Toyota 4runner, ADAS calibration problems do not always look like a dramatic failure. A dashboard message for the camera, radar, lane assist, or ACC is a clear indicator, but many drivers notice subtle changes first: lane-keeping that favors one side, lane departure warnings that feel overly sensitive, or lane-centering that wanders on roads with clear markings. Adaptive cruise control (ACC) may brake too aggressively, vary the following gap, or react late to vehicles ahead. You might also get random forward-collision warnings or blind-spot alerts at the wrong times. These symptoms can happen when sensor aim is slightly off, a radar bracket shifted, a windshield-mounted camera moved, or the steering angle sensor baseline no longer matches straight-ahead. The best clue is timing. If the behavior began after windshield replacement, alignment, suspension/steering repair, bumper work, or a minor impact, treat calibration verification as a safety step. An OEM-aligned approach is: scan for codes, confirm prerequisites (tires, ride height, alignment), complete static and/or dynamic calibration, then document results. If cracked glass is involved, Bang AutoGlass provides next-day mobile windshield replacement when scheduling allows. Most replacements take 30-45 minutes, plus at least one hour of safe drive time for adhesive cure, and are backed by a lifetime workmanship warranty.
How Shops Confirm Toyota 4runner ADAS Is In-Spec: Pre-Scan/Post-Scan, Alignment Specs, and Calibration Reports
To verify your Toyota 4runner ADAS is truly in-spec, a quality shop relies on process and documentation, not a quick drive. Step one is a pre-repair diagnostic scan to capture diagnostic trouble codes (DTCs), module communication status, and any stored ADAS history faults. Next, they confirm the mechanical items that make calibration valid: correct tire size and pressure, proper ride height, no looseness in steering or suspension, and a four-wheel alignment within spec (including thrust angle). Because ADAS targets vehicle geometry, even small alignment or ride-height errors can compromise camera calibration and radar calibration. With prerequisites met, the shop checks the exact ADAS configuration on your Toyota 4runner and selects the required OEM procedures for the repair event. Calibration may be static (targets placed at measured distances and heights on a level floor with controlled lighting) and/or dynamic (a scan-tool initiated road routine completed under defined speed, lane-marking, and weather conditions). After the routine, a post-scan confirms codes are cleared and systems report normal operation. Ask for proof: pre-scan/post-scan printouts, alignment measurements when applicable, and the ADAS calibration report (certificate) showing successful completion and final status.
Insurance and Warranty Questions for Toyota 4runner ADAS Calibration: What’s Typically Covered and What to Document
With Toyota 4runner ADAS calibration, reimbursement usually depends on the cause. Collision-related calibrations (bumper repair, sensor bracket replacement, suspension impact) are commonly billed under collision coverage. Calibrations required after windshield replacement on a Toyota 4runner with a windshield-mounted camera are often handled under comprehensive coverage, especially when the camera supports lane-keeping, forward-collision warning, or automatic emergency braking (AEB). Deductibles and carrier rules vary, so ask whether scanning and camera/radar calibration are reimbursable for your claim. Make the decision easy for the adjuster by keeping strong documentation: a repair order stating the trigger event, photos of the affected area, alignment printouts if alignment or ride height was part of the job, and both pre-scan and post-scan results. The key document is the ADAS calibration report showing the procedure performed and the final pass status. It also helps when invoices separate glass work, diagnostic scanning, and calibration labor. Bang AutoGlass supports the glass portion with mobile service (often as soon as next day when scheduling allows) and works with all insurers when comprehensive coverage applies. Windshield replacement typically takes 30-45 minutes, plus at least one hour of safe drive time for adhesive cure, and includes a lifetime workmanship warranty.
Services
Service Areas
Do You Need ADAS Calibration for Toyota 4runner After a Wheel Alignment? When Alignment Changes Affect Cameras and Radar
For a Toyota 4runner, an alignment is not purely mechanical; it can change how ADAS interprets the vehicle’s path. Lane-keeping assist and lane departure warning depend on the forward camera’s view of lane lines, but that camera also assumes the car’s calibrated centerline and steering angle sensor (SAS) baseline are correct. Adaptive cruise control (ACC) and automatic emergency braking (AEB) similarly assume the radar/camera are aimed relative to the true direction of travel. If toe, camber, caster, or thrust line is adjusted, the Toyota 4runner may travel on a slightly different angle than before, and OEM procedures often require a pre-scan, SAS reset/relearn, and an ADAS calibration verification. Depending on the package, the process may be static (targets positioned at measured distances on a level floor), dynamic (scan-tool guided road routine), or both. After any four-wheel alignment, ask whether the shop completed a post-scan and documented any required camera calibration, radar calibration, or steering angle reset. Skipping those steps can lead to “soft” issues—lane centering that drifts, ACC following that feels inconsistent, or alerts that trigger too early or too late. If you search "Toyota 4runner ADAS calibration after alignment" or "ADAS calibration near me," prioritize providers that document alignment specs and calibration outcomes.
Toyota 4runner ADAS Calibration After Suspension Work: Ride Height, Steering Angle Sensors, and Why Pricing Varies
Suspension or steering work on a Toyota 4runner—struts, shocks, springs, control arms, ball joints, tie rods, or steering components—often justifies an ADAS calibration check because these repairs change ride height and alignment geometry. ADAS sensors don’t “approximate” the road; they convert camera and radar views into precise angles and distances. A small change in ride height can tilt the forward camera (pitch/yaw) and alter radar aim, while changes in toe and thrust angle affect how the vehicle’s calibrated centerline matches its real path. Those mechanical shifts also influence how the steering angle sensor (SAS), yaw-rate sensor, and wheel-speed inputs are interpreted for lane-centering and ACC distance control. Many OEM workflows for a Toyota 4runner set prerequisites before recalibration: verify tire size/pressure, confirm ride height, inspect for looseness, and complete a four-wheel alignment within spec. Only then are camera calibration, radar calibration, or a steering angle reset considered valid. Pricing varies because the work varies—some trims need only a dynamic road routine, others require static targets, and some require both, plus multiple systems (front camera, front radar, blind-spot or parking sensors) to be checked. For best results, treat calibration as the final step and request the printed calibration report.
ADAS Calibration for Toyota 4runner After a Minor Collision: Even Without Visible Damage, Sensors Can Shift
ADAS calibration after a minor collision on your Toyota 4runner is easy to overlook because the vehicle may look fine. Cameras and radar sensors are mounted to tight tolerances, and a low-speed bumper tap, parking-lot impact, or curb strike can shift a bracket behind the bumper cover or disturb a camera mount—sometimes only millimeters. That small change can alter radar aim or camera perspective enough to affect ACC, AEB, lane-keeping assist, and forward collision warning. Misalignment also doesn’t always trigger a dash light; some systems store diagnostic trouble codes that only appear on a scan, while others keep working with reduced accuracy until you notice false alerts or inconsistent following distance. After any impact involving the bumper, grille, windshield/camera area, or suspension, prioritize a diagnostic pre-scan and post-scan plus any OEM-required aiming/calibration (static targets, dynamic road routine, or both). Keep the calibration report with your repair and insurance paperwork. If the incident also damaged your windshield, Bang AutoGlass can provide mobile replacement when scheduling allows. Most installs take 30–45 minutes; plan at least one hour of safe drive time for adhesive cure. We can also point you to the appropriate calibration resource.
Signs Your Toyota 4runner ADAS Needs Calibration: Warning Lights, Lane-Keeping Pull, ACC Issues, and False Alerts
On a Toyota 4runner, ADAS calibration problems do not always look like a dramatic failure. A dashboard message for the camera, radar, lane assist, or ACC is a clear indicator, but many drivers notice subtle changes first: lane-keeping that favors one side, lane departure warnings that feel overly sensitive, or lane-centering that wanders on roads with clear markings. Adaptive cruise control (ACC) may brake too aggressively, vary the following gap, or react late to vehicles ahead. You might also get random forward-collision warnings or blind-spot alerts at the wrong times. These symptoms can happen when sensor aim is slightly off, a radar bracket shifted, a windshield-mounted camera moved, or the steering angle sensor baseline no longer matches straight-ahead. The best clue is timing. If the behavior began after windshield replacement, alignment, suspension/steering repair, bumper work, or a minor impact, treat calibration verification as a safety step. An OEM-aligned approach is: scan for codes, confirm prerequisites (tires, ride height, alignment), complete static and/or dynamic calibration, then document results. If cracked glass is involved, Bang AutoGlass provides next-day mobile windshield replacement when scheduling allows. Most replacements take 30-45 minutes, plus at least one hour of safe drive time for adhesive cure, and are backed by a lifetime workmanship warranty.
How Shops Confirm Toyota 4runner ADAS Is In-Spec: Pre-Scan/Post-Scan, Alignment Specs, and Calibration Reports
To verify your Toyota 4runner ADAS is truly in-spec, a quality shop relies on process and documentation, not a quick drive. Step one is a pre-repair diagnostic scan to capture diagnostic trouble codes (DTCs), module communication status, and any stored ADAS history faults. Next, they confirm the mechanical items that make calibration valid: correct tire size and pressure, proper ride height, no looseness in steering or suspension, and a four-wheel alignment within spec (including thrust angle). Because ADAS targets vehicle geometry, even small alignment or ride-height errors can compromise camera calibration and radar calibration. With prerequisites met, the shop checks the exact ADAS configuration on your Toyota 4runner and selects the required OEM procedures for the repair event. Calibration may be static (targets placed at measured distances and heights on a level floor with controlled lighting) and/or dynamic (a scan-tool initiated road routine completed under defined speed, lane-marking, and weather conditions). After the routine, a post-scan confirms codes are cleared and systems report normal operation. Ask for proof: pre-scan/post-scan printouts, alignment measurements when applicable, and the ADAS calibration report (certificate) showing successful completion and final status.
Insurance and Warranty Questions for Toyota 4runner ADAS Calibration: What’s Typically Covered and What to Document
With Toyota 4runner ADAS calibration, reimbursement usually depends on the cause. Collision-related calibrations (bumper repair, sensor bracket replacement, suspension impact) are commonly billed under collision coverage. Calibrations required after windshield replacement on a Toyota 4runner with a windshield-mounted camera are often handled under comprehensive coverage, especially when the camera supports lane-keeping, forward-collision warning, or automatic emergency braking (AEB). Deductibles and carrier rules vary, so ask whether scanning and camera/radar calibration are reimbursable for your claim. Make the decision easy for the adjuster by keeping strong documentation: a repair order stating the trigger event, photos of the affected area, alignment printouts if alignment or ride height was part of the job, and both pre-scan and post-scan results. The key document is the ADAS calibration report showing the procedure performed and the final pass status. It also helps when invoices separate glass work, diagnostic scanning, and calibration labor. Bang AutoGlass supports the glass portion with mobile service (often as soon as next day when scheduling allows) and works with all insurers when comprehensive coverage applies. Windshield replacement typically takes 30-45 minutes, plus at least one hour of safe drive time for adhesive cure, and includes a lifetime workmanship warranty.
Services
Service Areas
Do You Need ADAS Calibration for Toyota 4runner After a Wheel Alignment? When Alignment Changes Affect Cameras and Radar
For a Toyota 4runner, an alignment is not purely mechanical; it can change how ADAS interprets the vehicle’s path. Lane-keeping assist and lane departure warning depend on the forward camera’s view of lane lines, but that camera also assumes the car’s calibrated centerline and steering angle sensor (SAS) baseline are correct. Adaptive cruise control (ACC) and automatic emergency braking (AEB) similarly assume the radar/camera are aimed relative to the true direction of travel. If toe, camber, caster, or thrust line is adjusted, the Toyota 4runner may travel on a slightly different angle than before, and OEM procedures often require a pre-scan, SAS reset/relearn, and an ADAS calibration verification. Depending on the package, the process may be static (targets positioned at measured distances on a level floor), dynamic (scan-tool guided road routine), or both. After any four-wheel alignment, ask whether the shop completed a post-scan and documented any required camera calibration, radar calibration, or steering angle reset. Skipping those steps can lead to “soft” issues—lane centering that drifts, ACC following that feels inconsistent, or alerts that trigger too early or too late. If you search "Toyota 4runner ADAS calibration after alignment" or "ADAS calibration near me," prioritize providers that document alignment specs and calibration outcomes.
Toyota 4runner ADAS Calibration After Suspension Work: Ride Height, Steering Angle Sensors, and Why Pricing Varies
Suspension or steering work on a Toyota 4runner—struts, shocks, springs, control arms, ball joints, tie rods, or steering components—often justifies an ADAS calibration check because these repairs change ride height and alignment geometry. ADAS sensors don’t “approximate” the road; they convert camera and radar views into precise angles and distances. A small change in ride height can tilt the forward camera (pitch/yaw) and alter radar aim, while changes in toe and thrust angle affect how the vehicle’s calibrated centerline matches its real path. Those mechanical shifts also influence how the steering angle sensor (SAS), yaw-rate sensor, and wheel-speed inputs are interpreted for lane-centering and ACC distance control. Many OEM workflows for a Toyota 4runner set prerequisites before recalibration: verify tire size/pressure, confirm ride height, inspect for looseness, and complete a four-wheel alignment within spec. Only then are camera calibration, radar calibration, or a steering angle reset considered valid. Pricing varies because the work varies—some trims need only a dynamic road routine, others require static targets, and some require both, plus multiple systems (front camera, front radar, blind-spot or parking sensors) to be checked. For best results, treat calibration as the final step and request the printed calibration report.
ADAS Calibration for Toyota 4runner After a Minor Collision: Even Without Visible Damage, Sensors Can Shift
ADAS calibration after a minor collision on your Toyota 4runner is easy to overlook because the vehicle may look fine. Cameras and radar sensors are mounted to tight tolerances, and a low-speed bumper tap, parking-lot impact, or curb strike can shift a bracket behind the bumper cover or disturb a camera mount—sometimes only millimeters. That small change can alter radar aim or camera perspective enough to affect ACC, AEB, lane-keeping assist, and forward collision warning. Misalignment also doesn’t always trigger a dash light; some systems store diagnostic trouble codes that only appear on a scan, while others keep working with reduced accuracy until you notice false alerts or inconsistent following distance. After any impact involving the bumper, grille, windshield/camera area, or suspension, prioritize a diagnostic pre-scan and post-scan plus any OEM-required aiming/calibration (static targets, dynamic road routine, or both). Keep the calibration report with your repair and insurance paperwork. If the incident also damaged your windshield, Bang AutoGlass can provide mobile replacement when scheduling allows. Most installs take 30–45 minutes; plan at least one hour of safe drive time for adhesive cure. We can also point you to the appropriate calibration resource.
Signs Your Toyota 4runner ADAS Needs Calibration: Warning Lights, Lane-Keeping Pull, ACC Issues, and False Alerts
On a Toyota 4runner, ADAS calibration problems do not always look like a dramatic failure. A dashboard message for the camera, radar, lane assist, or ACC is a clear indicator, but many drivers notice subtle changes first: lane-keeping that favors one side, lane departure warnings that feel overly sensitive, or lane-centering that wanders on roads with clear markings. Adaptive cruise control (ACC) may brake too aggressively, vary the following gap, or react late to vehicles ahead. You might also get random forward-collision warnings or blind-spot alerts at the wrong times. These symptoms can happen when sensor aim is slightly off, a radar bracket shifted, a windshield-mounted camera moved, or the steering angle sensor baseline no longer matches straight-ahead. The best clue is timing. If the behavior began after windshield replacement, alignment, suspension/steering repair, bumper work, or a minor impact, treat calibration verification as a safety step. An OEM-aligned approach is: scan for codes, confirm prerequisites (tires, ride height, alignment), complete static and/or dynamic calibration, then document results. If cracked glass is involved, Bang AutoGlass provides next-day mobile windshield replacement when scheduling allows. Most replacements take 30-45 minutes, plus at least one hour of safe drive time for adhesive cure, and are backed by a lifetime workmanship warranty.
How Shops Confirm Toyota 4runner ADAS Is In-Spec: Pre-Scan/Post-Scan, Alignment Specs, and Calibration Reports
To verify your Toyota 4runner ADAS is truly in-spec, a quality shop relies on process and documentation, not a quick drive. Step one is a pre-repair diagnostic scan to capture diagnostic trouble codes (DTCs), module communication status, and any stored ADAS history faults. Next, they confirm the mechanical items that make calibration valid: correct tire size and pressure, proper ride height, no looseness in steering or suspension, and a four-wheel alignment within spec (including thrust angle). Because ADAS targets vehicle geometry, even small alignment or ride-height errors can compromise camera calibration and radar calibration. With prerequisites met, the shop checks the exact ADAS configuration on your Toyota 4runner and selects the required OEM procedures for the repair event. Calibration may be static (targets placed at measured distances and heights on a level floor with controlled lighting) and/or dynamic (a scan-tool initiated road routine completed under defined speed, lane-marking, and weather conditions). After the routine, a post-scan confirms codes are cleared and systems report normal operation. Ask for proof: pre-scan/post-scan printouts, alignment measurements when applicable, and the ADAS calibration report (certificate) showing successful completion and final status.
Insurance and Warranty Questions for Toyota 4runner ADAS Calibration: What’s Typically Covered and What to Document
With Toyota 4runner ADAS calibration, reimbursement usually depends on the cause. Collision-related calibrations (bumper repair, sensor bracket replacement, suspension impact) are commonly billed under collision coverage. Calibrations required after windshield replacement on a Toyota 4runner with a windshield-mounted camera are often handled under comprehensive coverage, especially when the camera supports lane-keeping, forward-collision warning, or automatic emergency braking (AEB). Deductibles and carrier rules vary, so ask whether scanning and camera/radar calibration are reimbursable for your claim. Make the decision easy for the adjuster by keeping strong documentation: a repair order stating the trigger event, photos of the affected area, alignment printouts if alignment or ride height was part of the job, and both pre-scan and post-scan results. The key document is the ADAS calibration report showing the procedure performed and the final pass status. It also helps when invoices separate glass work, diagnostic scanning, and calibration labor. Bang AutoGlass supports the glass portion with mobile service (often as soon as next day when scheduling allows) and works with all insurers when comprehensive coverage applies. Windshield replacement typically takes 30-45 minutes, plus at least one hour of safe drive time for adhesive cure, and includes a lifetime workmanship warranty.
Enjoy More Relevant Blogs
How Much Does ADAS Calibration Cost for Toyota 4runner? What Drives Pricing and What Insurance Typically Covers
How much does ADAS calibration cost for a Toyota 4runner? Learn pricing drivers, camera vs radar needs, labor time, and what insurance typically covers.
Mobile ADAS Calibration for Toyota 4runner: What to Expect On-Site and Why Setup Matters
Mobile ADAS calibration for Toyota 4runner: what to expect on-site, space and lighting needs, and why setup and verification matter after repairs today.
Camera Calibration for Toyota 4runner: Lane Assist and Forward Collision Accuracy Explained
Need camera calibration for your Toyota 4runner? See how calibration affects lane assist and forward collision accuracy after windshield service or repairs.
ADAS Warning Lights on Toyota 4runner: When Calibration Is the Fix and When It’s Not
ADAS warning lights on your Toyota 4runner? Learn when calibration fixes lane assist or AEB issues, when it will not, and what to check next. Schedule help.
Static vs Dynamic ADAS Calibration for Toyota 4runner: What the Difference Means
Static vs dynamic ADAS calibration for Toyota 4runner: key differences, when each is required, how long it takes, and what affects accuracy for safety.
Pre- and Post-Calibration Scans for Toyota 4runner: Proving Systems Are Set Correctly
Pre- and post-calibration scans for Toyota 4runner: see why scans matter, what they verify, and how reports prove ADAS systems are set correctly after service.
OEM Calibration Requirements for Toyota 4runner: How to Confirm What Must Be Calibrated
OEM calibration requirements for Toyota 4runner: how to confirm what must be calibrated after repairs, what triggers recalibration, and what proof to ask for.
How to Schedule ADAS Calibration for Toyota 4runner After Windshield Replacement
Schedule ADAS calibration for Toyota 4runner after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
ADAS Calibration Checklist for Toyota 4runner: Documentation, Verification, and Final Safety Checks
ADAS calibration checklist for Toyota 4runner: documentation to request, scans to verify, and safety checks that confirm cameras and sensors are set right.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm