Services
Service Areas
Immediate Safety Steps After Sunroof Breakage on Toyota Paseo: Secure the Area and Prevent Injury
A shattered Toyota Paseo sunroof can feel chaotic, but a structured response limits injuries and prevents additional damage. If the glass fails while you’re moving, maintain lane position, slow down gradually, and pull over in a visible, low-traffic spot. Keep windows mostly up to reduce wind-driven blowback. Turn on hazard lights, park, and have passengers exit from a door that is clear of glass, stepping carefully onto clean ground. Check everyone for small cuts, especially on shoulders and along seat edges. Rinse minor nicks if you can, cover them with a clean dressing, and seek medical attention for deeper wounds or embedded glass. Before cleanup, secure the vehicle. Do not press the sunroof button, even if the panel looks stuck—glass can jam tracks and cables, and moving the mechanism can worsen damage. Reduce drafts by keeping doors closed and keep children and pets away from the cabin. If the sunshade is intact, close it; if it’s damaged, lay a towel over the opening as a catcher, not stuffed into tracks. Tape sharp perimeter edges with painter’s tape and cover the seats and dash with a blanket. Temporary protection helps, but you’ll want professional Toyota Paseo sunroof glass replacement to restore a factory-like seal. Bang AutoGlass offers mobile replacement with correct-part verification and workmanship backed by a lifetime warranty.
Cleanup Checklist for Toyota Paseo: Removing Glass Safely and Protecting Interior Surfaces
A careful cleanup after broken Toyota Paseo sunroof glass matters because tiny pellets migrate into carpet fibers, seat seams, and HVAC vents. Start with PPE: gloves, eye protection, long sleeves, and closed-toe shoes. Remove loose items, then pull the floor mats and shake or vacuum them outside, away from people and pets. Pick up the largest fragments slowly and place them in a rigid container or heavy-duty bag. Next, vacuum methodically from top to bottom: headliner edge, seat tops, seat creases, carpet, then door pockets. A shop-vac with a crevice tool is best, but a handheld vacuum works if you take multiple passes. Use a flashlight at a low angle to spot reflective shards, and use a soft brush attachment for vents and trim gaps. Avoid compressed air; it can drive glass deeper into fabric and scatter it into the HVAC system. To capture micro-shards, dab wide painter’s tape or use a lint roller onto fabric and rubber seals. Wipe hard surfaces with a slightly damp microfiber cloth, then inspect the sunroof tracks and corners for debris that could affect sealing. If you’d prefer a professional cleanup, Bang AutoGlass can include it with your mobile Toyota Paseo sunroof glass replacement.
Temporary Weather Protection: How to Cover the Toyota Paseo Roof Opening Until Replacement
If Toyota Paseo sunroof glass is missing or cracked through, you need a temporary barrier that sheds rain and resists wind without damaging the roof finish. Automotive crash wrap is the most reliable option, but a heavy, tear-resistant plastic sheet can work when installed tightly. Avoid thin trash bags or cling film; they split quickly and can whistle loudly at speed. With gloves on, remove loose shards that could puncture the plastic and wipe the surrounding paint completely dry. Cut the sheet so it overlaps the opening by several inches on all sides. Position it flat, then tape the front edge first so airflow cannot lift it. Continue with long, overlapping tape strips along both sides and the rear, pressing firmly to create a continuous seal. Painter’s tape or automotive masking tape removes more cleanly; stronger adhesives may leave residue or pull clearcoat. During the temporary period, avoid automatic car washes and do not aim a hose directly at taped edges. If you must travel, keep speeds conservative and check the seal after the first few miles and after heavy rain. Do not block drain channels or pack tracks with cloth; restricted drainage can push water into the headliner. Weather protection buys time, not a permanent fix. Arrange professional Toyota Paseo sunroof glass replacement promptly. Bang AutoGlass offers mobile service with correct-part verification and a lifetime workmanship warranty.
Damage Assessment: Checking Frame, Seals, Tracks, and Drains Before Toyota Paseo Replacement
A broken Toyota Paseo sunroof is rarely “glass only,” so an assessment helps prevent leaks or wind noise after replacement. Sunroofs depend on alignment, tracks, seals, and drains. If impact bends the frame or debris sits in the rails, the new glass may not seat evenly and small gaps can let water or air in. Start with a visual sweep of the opening. Check the frame and surrounding paint for deformation, chipped edges, or corrosion. Inspect mounting points and trim for cracks or looseness, then look at the headliner near the opening for discoloration or damp spots that suggest a drain backup. Next, check the mechanical areas. Inspect rails, guides, and the wind deflector for glass pellets—most collect in the front corners and along the side rails. Leaving fragments can block a flush seat, strain the motor, and cause rattles, so don’t operate the sunroof until everything is cleaned out. Finish with drainage. Pour a small amount of water into the channel and confirm it drains quickly and exits under the vehicle. If it’s slow or drips inside, drain tubes likely need clearing; caulk “quick fixes” usually trap water. Bang AutoGlass can handle inspection and cleanup during mobile Toyota Paseo sunroof glass replacement for a proper seal.
Next Steps to Schedule Toyota Paseo Sunroof Glass Replacement: VIN, Photos, and Correct Part Verification
Getting Toyota Paseo sunroof glass replacement booked quickly comes down to part accuracy. Sunroof panels aren’t one-size-fits-all, even within the same model line, so confirm the right glass before dispatch. Start with your VIN (17-digit Vehicle Identification Number). The VIN helps identify OE part numbers and configuration codes for your exact Toyota Paseo, including standard vs. panoramic systems, tint/coating differences, bracket styles, and mid-year revisions. You can find it at the lower driver-side windshield, the driver door-jamb label, or your registration paperwork. Next, document the damage with photos that show both context and detail: a wide shot of the roof opening, close-ups of each corner and the frame, and an interior photo of the tracks and shade area. If any glass remains, capture etched markings or logos; they can confirm the manufacturer/spec when multiple parts are possible. For aftermarket sunroofs, add a couple of opening measurements and photos of the cassette hardware, since VIN lookups may not match aftermarket panels. When you contact Bang AutoGlass, we verify the correct Toyota Paseo sunroof glass, confirm lead time, and schedule mobile installation at your home or work. If comprehensive insurance applies, we can help with typical claim requirements and coordinate with your carrier to avoid delays.
After Replacement: Bonding Cure, Drive-Away Guidance, and Post-Install Leak and Wind Noise Checks
After your Toyota Paseo sunroof glass replacement, protect the fresh adhesive bond and confirm watertight, low-noise performance. Follow the installer’s safe drive-away time (often about an hour, depending on adhesive, temperature, and humidity), and minimize vibration and pressure changes during that window so the glass stays seated. For the rest of the day, keep the sunroof closed. Don’t press on the glass edge or surrounding trim, and avoid automatic car washes or high-pressure spray aimed at the roof opening. If possible, park on level ground and avoid rough roads and hard door slams right after service; body flex and sudden cabin pressure can stress a bond line that’s still curing. After the initial cure window, do a quick check. Run a gentle hose over the roof (no pressure tip) and inspect the headliner edge for moisture. Confirm water drains out under the vehicle and doesn’t pool in the channel. Operate the shade and sunroof once, listening for smooth travel. On your next highway drive, note any whistling or added wind noise that could signal alignment or seal issues. If anything seems off, contact Bang AutoGlass—our lifetime workmanship warranty supports your mobile Toyota Paseo sunroof glass replacement.
Services
Service Areas
Immediate Safety Steps After Sunroof Breakage on Toyota Paseo: Secure the Area and Prevent Injury
A shattered Toyota Paseo sunroof can feel chaotic, but a structured response limits injuries and prevents additional damage. If the glass fails while you’re moving, maintain lane position, slow down gradually, and pull over in a visible, low-traffic spot. Keep windows mostly up to reduce wind-driven blowback. Turn on hazard lights, park, and have passengers exit from a door that is clear of glass, stepping carefully onto clean ground. Check everyone for small cuts, especially on shoulders and along seat edges. Rinse minor nicks if you can, cover them with a clean dressing, and seek medical attention for deeper wounds or embedded glass. Before cleanup, secure the vehicle. Do not press the sunroof button, even if the panel looks stuck—glass can jam tracks and cables, and moving the mechanism can worsen damage. Reduce drafts by keeping doors closed and keep children and pets away from the cabin. If the sunshade is intact, close it; if it’s damaged, lay a towel over the opening as a catcher, not stuffed into tracks. Tape sharp perimeter edges with painter’s tape and cover the seats and dash with a blanket. Temporary protection helps, but you’ll want professional Toyota Paseo sunroof glass replacement to restore a factory-like seal. Bang AutoGlass offers mobile replacement with correct-part verification and workmanship backed by a lifetime warranty.
Cleanup Checklist for Toyota Paseo: Removing Glass Safely and Protecting Interior Surfaces
A careful cleanup after broken Toyota Paseo sunroof glass matters because tiny pellets migrate into carpet fibers, seat seams, and HVAC vents. Start with PPE: gloves, eye protection, long sleeves, and closed-toe shoes. Remove loose items, then pull the floor mats and shake or vacuum them outside, away from people and pets. Pick up the largest fragments slowly and place them in a rigid container or heavy-duty bag. Next, vacuum methodically from top to bottom: headliner edge, seat tops, seat creases, carpet, then door pockets. A shop-vac with a crevice tool is best, but a handheld vacuum works if you take multiple passes. Use a flashlight at a low angle to spot reflective shards, and use a soft brush attachment for vents and trim gaps. Avoid compressed air; it can drive glass deeper into fabric and scatter it into the HVAC system. To capture micro-shards, dab wide painter’s tape or use a lint roller onto fabric and rubber seals. Wipe hard surfaces with a slightly damp microfiber cloth, then inspect the sunroof tracks and corners for debris that could affect sealing. If you’d prefer a professional cleanup, Bang AutoGlass can include it with your mobile Toyota Paseo sunroof glass replacement.
Temporary Weather Protection: How to Cover the Toyota Paseo Roof Opening Until Replacement
If Toyota Paseo sunroof glass is missing or cracked through, you need a temporary barrier that sheds rain and resists wind without damaging the roof finish. Automotive crash wrap is the most reliable option, but a heavy, tear-resistant plastic sheet can work when installed tightly. Avoid thin trash bags or cling film; they split quickly and can whistle loudly at speed. With gloves on, remove loose shards that could puncture the plastic and wipe the surrounding paint completely dry. Cut the sheet so it overlaps the opening by several inches on all sides. Position it flat, then tape the front edge first so airflow cannot lift it. Continue with long, overlapping tape strips along both sides and the rear, pressing firmly to create a continuous seal. Painter’s tape or automotive masking tape removes more cleanly; stronger adhesives may leave residue or pull clearcoat. During the temporary period, avoid automatic car washes and do not aim a hose directly at taped edges. If you must travel, keep speeds conservative and check the seal after the first few miles and after heavy rain. Do not block drain channels or pack tracks with cloth; restricted drainage can push water into the headliner. Weather protection buys time, not a permanent fix. Arrange professional Toyota Paseo sunroof glass replacement promptly. Bang AutoGlass offers mobile service with correct-part verification and a lifetime workmanship warranty.
Damage Assessment: Checking Frame, Seals, Tracks, and Drains Before Toyota Paseo Replacement
A broken Toyota Paseo sunroof is rarely “glass only,” so an assessment helps prevent leaks or wind noise after replacement. Sunroofs depend on alignment, tracks, seals, and drains. If impact bends the frame or debris sits in the rails, the new glass may not seat evenly and small gaps can let water or air in. Start with a visual sweep of the opening. Check the frame and surrounding paint for deformation, chipped edges, or corrosion. Inspect mounting points and trim for cracks or looseness, then look at the headliner near the opening for discoloration or damp spots that suggest a drain backup. Next, check the mechanical areas. Inspect rails, guides, and the wind deflector for glass pellets—most collect in the front corners and along the side rails. Leaving fragments can block a flush seat, strain the motor, and cause rattles, so don’t operate the sunroof until everything is cleaned out. Finish with drainage. Pour a small amount of water into the channel and confirm it drains quickly and exits under the vehicle. If it’s slow or drips inside, drain tubes likely need clearing; caulk “quick fixes” usually trap water. Bang AutoGlass can handle inspection and cleanup during mobile Toyota Paseo sunroof glass replacement for a proper seal.
Next Steps to Schedule Toyota Paseo Sunroof Glass Replacement: VIN, Photos, and Correct Part Verification
Getting Toyota Paseo sunroof glass replacement booked quickly comes down to part accuracy. Sunroof panels aren’t one-size-fits-all, even within the same model line, so confirm the right glass before dispatch. Start with your VIN (17-digit Vehicle Identification Number). The VIN helps identify OE part numbers and configuration codes for your exact Toyota Paseo, including standard vs. panoramic systems, tint/coating differences, bracket styles, and mid-year revisions. You can find it at the lower driver-side windshield, the driver door-jamb label, or your registration paperwork. Next, document the damage with photos that show both context and detail: a wide shot of the roof opening, close-ups of each corner and the frame, and an interior photo of the tracks and shade area. If any glass remains, capture etched markings or logos; they can confirm the manufacturer/spec when multiple parts are possible. For aftermarket sunroofs, add a couple of opening measurements and photos of the cassette hardware, since VIN lookups may not match aftermarket panels. When you contact Bang AutoGlass, we verify the correct Toyota Paseo sunroof glass, confirm lead time, and schedule mobile installation at your home or work. If comprehensive insurance applies, we can help with typical claim requirements and coordinate with your carrier to avoid delays.
After Replacement: Bonding Cure, Drive-Away Guidance, and Post-Install Leak and Wind Noise Checks
After your Toyota Paseo sunroof glass replacement, protect the fresh adhesive bond and confirm watertight, low-noise performance. Follow the installer’s safe drive-away time (often about an hour, depending on adhesive, temperature, and humidity), and minimize vibration and pressure changes during that window so the glass stays seated. For the rest of the day, keep the sunroof closed. Don’t press on the glass edge or surrounding trim, and avoid automatic car washes or high-pressure spray aimed at the roof opening. If possible, park on level ground and avoid rough roads and hard door slams right after service; body flex and sudden cabin pressure can stress a bond line that’s still curing. After the initial cure window, do a quick check. Run a gentle hose over the roof (no pressure tip) and inspect the headliner edge for moisture. Confirm water drains out under the vehicle and doesn’t pool in the channel. Operate the shade and sunroof once, listening for smooth travel. On your next highway drive, note any whistling or added wind noise that could signal alignment or seal issues. If anything seems off, contact Bang AutoGlass—our lifetime workmanship warranty supports your mobile Toyota Paseo sunroof glass replacement.
Services
Service Areas
Immediate Safety Steps After Sunroof Breakage on Toyota Paseo: Secure the Area and Prevent Injury
A shattered Toyota Paseo sunroof can feel chaotic, but a structured response limits injuries and prevents additional damage. If the glass fails while you’re moving, maintain lane position, slow down gradually, and pull over in a visible, low-traffic spot. Keep windows mostly up to reduce wind-driven blowback. Turn on hazard lights, park, and have passengers exit from a door that is clear of glass, stepping carefully onto clean ground. Check everyone for small cuts, especially on shoulders and along seat edges. Rinse minor nicks if you can, cover them with a clean dressing, and seek medical attention for deeper wounds or embedded glass. Before cleanup, secure the vehicle. Do not press the sunroof button, even if the panel looks stuck—glass can jam tracks and cables, and moving the mechanism can worsen damage. Reduce drafts by keeping doors closed and keep children and pets away from the cabin. If the sunshade is intact, close it; if it’s damaged, lay a towel over the opening as a catcher, not stuffed into tracks. Tape sharp perimeter edges with painter’s tape and cover the seats and dash with a blanket. Temporary protection helps, but you’ll want professional Toyota Paseo sunroof glass replacement to restore a factory-like seal. Bang AutoGlass offers mobile replacement with correct-part verification and workmanship backed by a lifetime warranty.
Cleanup Checklist for Toyota Paseo: Removing Glass Safely and Protecting Interior Surfaces
A careful cleanup after broken Toyota Paseo sunroof glass matters because tiny pellets migrate into carpet fibers, seat seams, and HVAC vents. Start with PPE: gloves, eye protection, long sleeves, and closed-toe shoes. Remove loose items, then pull the floor mats and shake or vacuum them outside, away from people and pets. Pick up the largest fragments slowly and place them in a rigid container or heavy-duty bag. Next, vacuum methodically from top to bottom: headliner edge, seat tops, seat creases, carpet, then door pockets. A shop-vac with a crevice tool is best, but a handheld vacuum works if you take multiple passes. Use a flashlight at a low angle to spot reflective shards, and use a soft brush attachment for vents and trim gaps. Avoid compressed air; it can drive glass deeper into fabric and scatter it into the HVAC system. To capture micro-shards, dab wide painter’s tape or use a lint roller onto fabric and rubber seals. Wipe hard surfaces with a slightly damp microfiber cloth, then inspect the sunroof tracks and corners for debris that could affect sealing. If you’d prefer a professional cleanup, Bang AutoGlass can include it with your mobile Toyota Paseo sunroof glass replacement.
Temporary Weather Protection: How to Cover the Toyota Paseo Roof Opening Until Replacement
If Toyota Paseo sunroof glass is missing or cracked through, you need a temporary barrier that sheds rain and resists wind without damaging the roof finish. Automotive crash wrap is the most reliable option, but a heavy, tear-resistant plastic sheet can work when installed tightly. Avoid thin trash bags or cling film; they split quickly and can whistle loudly at speed. With gloves on, remove loose shards that could puncture the plastic and wipe the surrounding paint completely dry. Cut the sheet so it overlaps the opening by several inches on all sides. Position it flat, then tape the front edge first so airflow cannot lift it. Continue with long, overlapping tape strips along both sides and the rear, pressing firmly to create a continuous seal. Painter’s tape or automotive masking tape removes more cleanly; stronger adhesives may leave residue or pull clearcoat. During the temporary period, avoid automatic car washes and do not aim a hose directly at taped edges. If you must travel, keep speeds conservative and check the seal after the first few miles and after heavy rain. Do not block drain channels or pack tracks with cloth; restricted drainage can push water into the headliner. Weather protection buys time, not a permanent fix. Arrange professional Toyota Paseo sunroof glass replacement promptly. Bang AutoGlass offers mobile service with correct-part verification and a lifetime workmanship warranty.
Damage Assessment: Checking Frame, Seals, Tracks, and Drains Before Toyota Paseo Replacement
A broken Toyota Paseo sunroof is rarely “glass only,” so an assessment helps prevent leaks or wind noise after replacement. Sunroofs depend on alignment, tracks, seals, and drains. If impact bends the frame or debris sits in the rails, the new glass may not seat evenly and small gaps can let water or air in. Start with a visual sweep of the opening. Check the frame and surrounding paint for deformation, chipped edges, or corrosion. Inspect mounting points and trim for cracks or looseness, then look at the headliner near the opening for discoloration or damp spots that suggest a drain backup. Next, check the mechanical areas. Inspect rails, guides, and the wind deflector for glass pellets—most collect in the front corners and along the side rails. Leaving fragments can block a flush seat, strain the motor, and cause rattles, so don’t operate the sunroof until everything is cleaned out. Finish with drainage. Pour a small amount of water into the channel and confirm it drains quickly and exits under the vehicle. If it’s slow or drips inside, drain tubes likely need clearing; caulk “quick fixes” usually trap water. Bang AutoGlass can handle inspection and cleanup during mobile Toyota Paseo sunroof glass replacement for a proper seal.
Next Steps to Schedule Toyota Paseo Sunroof Glass Replacement: VIN, Photos, and Correct Part Verification
Getting Toyota Paseo sunroof glass replacement booked quickly comes down to part accuracy. Sunroof panels aren’t one-size-fits-all, even within the same model line, so confirm the right glass before dispatch. Start with your VIN (17-digit Vehicle Identification Number). The VIN helps identify OE part numbers and configuration codes for your exact Toyota Paseo, including standard vs. panoramic systems, tint/coating differences, bracket styles, and mid-year revisions. You can find it at the lower driver-side windshield, the driver door-jamb label, or your registration paperwork. Next, document the damage with photos that show both context and detail: a wide shot of the roof opening, close-ups of each corner and the frame, and an interior photo of the tracks and shade area. If any glass remains, capture etched markings or logos; they can confirm the manufacturer/spec when multiple parts are possible. For aftermarket sunroofs, add a couple of opening measurements and photos of the cassette hardware, since VIN lookups may not match aftermarket panels. When you contact Bang AutoGlass, we verify the correct Toyota Paseo sunroof glass, confirm lead time, and schedule mobile installation at your home or work. If comprehensive insurance applies, we can help with typical claim requirements and coordinate with your carrier to avoid delays.
After Replacement: Bonding Cure, Drive-Away Guidance, and Post-Install Leak and Wind Noise Checks
After your Toyota Paseo sunroof glass replacement, protect the fresh adhesive bond and confirm watertight, low-noise performance. Follow the installer’s safe drive-away time (often about an hour, depending on adhesive, temperature, and humidity), and minimize vibration and pressure changes during that window so the glass stays seated. For the rest of the day, keep the sunroof closed. Don’t press on the glass edge or surrounding trim, and avoid automatic car washes or high-pressure spray aimed at the roof opening. If possible, park on level ground and avoid rough roads and hard door slams right after service; body flex and sudden cabin pressure can stress a bond line that’s still curing. After the initial cure window, do a quick check. Run a gentle hose over the roof (no pressure tip) and inspect the headliner edge for moisture. Confirm water drains out under the vehicle and doesn’t pool in the channel. Operate the shade and sunroof once, listening for smooth travel. On your next highway drive, note any whistling or added wind noise that could signal alignment or seal issues. If anything seems off, contact Bang AutoGlass—our lifetime workmanship warranty supports your mobile Toyota Paseo sunroof glass replacement.
Enjoy More Relevant Blogs
Urethane Bonding for Toyota Paseo Sunroof Glass Replacement: Why Adhesive Quality Matters
Urethane bonding for Toyota Paseo sunroof glass replacement: why adhesive quality matters for safety, leaks, and long-term durability after install.
How Much Does Toyota Paseo Sunroof Glass Replacement Cost? OEM vs Aftermarket, Labor Factors, and Estimate Tips
Toyota Paseo sunroof glass replacement cost: price drivers, OEM vs aftermarket options, labor factors, and tips for an accurate estimate—compare now.
Sunroof Leak on Toyota Paseo: Drain Fix vs Sunroof Glass Replacement Decision Guide
Sunroof leak on Toyota Paseo? Compare drain fixes vs sunroof glass replacement, warning signs, and the best next step to stop water damage fast today.
OEM-Quality Sunroof Glass Replacement for Toyota Paseo: DOT Markings and FMVSS 205 Explained
OEM-quality sunroof glass replacement for Toyota Paseo: understand DOT markings and FMVSS 205, plus fit checks that help prevent leaks—get it done right.
Sunroof vs Moonroof on Toyota Paseo: How to Order the Correct Roof Glass Replacement
Sunroof vs moonroof on Toyota Paseo: learn the differences, how to confirm your roof type, and order the correct replacement glass to avoid fit and leaks.
Will My Comprehensive Policy Cover Toyota Paseo Sunroof Glass Replacement? Claim Steps, Photos to Take, and Deductible Basics
Will comprehensive insurance cover Toyota Paseo sunroof glass replacement? See claim steps, photos to take, deductible basics, and tips before filing.
Wind Noise After Sunroof Glass Replacement on Toyota Paseo: Seal, Fit, and Alignment Checklist
Wind noise after Toyota Paseo sunroof glass replacement? Check seal fit, alignment, and hardware so the roof closes tight and stays quiet at speed daily.
Panoramic Sunroof Glass Replacement for Toyota Paseo: Install Steps and Safe Drive-Away Timing
Panoramic sunroof glass replacement for Toyota Paseo: walk through install steps, cure-time rules, and safe drive-away timing so you avoid leaks. Book now.
How to Schedule Mobile Sunroof Glass Replacement for Toyota Paseo
Schedule mobile sunroof glass replacement for Toyota Paseo: what info to share, photos to take, timing, and what to expect on-site—avoid delays today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm