Services
Service Areas
Cleanup After Quarter Window Breakage on Toyota Verso-S: Safe Glass Removal and Interior Protection
With a broken quarter window on your Toyota Verso-S, cleanup is where small mistakes turn into scratches, lingering glass, and drafts from a rushed cover. Because quarter glass is tempered, it breaks into pellets that migrate into carpet, seat rails, and storage pockets. Secure the vehicle first: keep children and pets away, wear eye protection and cut-resistant gloves, and remove loose items that can hide shards. Lift the largest pieces from the opening and lower ledge rather than pressing down. Scoop with a dustpan or stiff cardboard, then vacuum in passes with a hose and crevice tool, starting at trim seams and working down through seats, carpet, and floor mats. Skip aggressive sweeping; it drives fine glass deeper into fabric. For upholstery, press wide painter’s tape or use a lint roller to capture the grit you can’t see, and wipe hard plastics with a damp microfiber. If you need a short-term weather shield, tape plastic sheeting from the inside with painter’s tape so it sheds rain without pulling paint or leaving residue. Then schedule Bang AutoGlass for mobile quarter window replacement—we arrive with the correct glass, complete final cleanup, and often restore your Toyota Verso-S as soon as next day.
Verify the Correct Quarter Glass for Toyota Verso-S: Fixed vs Pop-Out, Tint Match, and DOT Markings
Before we install a quarter window on your Toyota Verso-S, we confirm the exact part and configuration so you don’t end up with a trim gap, slow leak, or a tint mismatch. First we identify the window style: fixed, urethane-bonded quarter glass versus a pop-out/vent unit with hinges, latches, and a different frame. We verify your Toyota Verso-S body style, model-year range, and left/right orientation. Next we match appearance—clear versus factory privacy tint, shade consistency, and how any existing film will affect the final tone. We also confirm compliance markings on the glass “bug,” including DOT and safety identifiers and the correct AS rating for non-windshield glazing. Many quarter windows are supplied as an encapsulated assembly with bonded molding, studs, locator pins, or clips; those components control seating depth, reveal lines, and how interior panels snap back in without stress. When applicable, we verify embedded features such as antenna elements so functionality is retained. The goal is an OEM-style Toyota Verso-S quarter window replacement that seals and looks factory. If comprehensive coverage applies, Bang AutoGlass works with all insurance companies and can assist with claim steps on-site.
Remove Trim and Old Glass: Toyota Verso-S Quarter Window Replacement Disassembly Checklist
Replacing the quarter window on a Toyota Verso-S requires disciplined disassembly: gain access cleanly, protect paint, and preserve clips so the vehicle reassembles without rattles. We begin by preparing the area—opening another door or window to reduce pressure changes, powering down accessories, and masking nearby paint and weatherstrips. From the inside, we remove only the trim needed to reach the quarter opening, which may include a rear seat bolster, quarter trim, and cargo-side panels. Non-marring tools are used throughout, and fasteners are labeled so each clip and screw returns to its original position. We’re careful around seatbelt anchors and curtain airbag zones to avoid damage and warning lights. Removal method depends on the Toyota Verso-S design: bonded glass is released by cutting the urethane bead without gouging the pinchweld; bolt-in or framed styles require supporting the glass as retainers are removed. After the old glass is out, we clear remaining pellets, address any distorted molding, and stage the opening with proper bond prep, including a dry fit when locator pins are used. Most mobile quarter window replacements take about 30–45 minutes for the swap, then we recommend cure time before safe drive-away.
Prep the Pinchweld and Bond Area: Corrosion Checks, Primers, and Adhesion Readiness
A durable quarter window replacement for your Toyota Verso-S is won in bond preparation. With bonded quarter glass, the pinchweld (metal flange) must be clean, stable, and compatible with the urethane system, or you risk water intrusion into the quarter cavity and corrosion spreading under paint. Bang AutoGlass begins with a corrosion and coating assessment, looking for bubbling paint, surface rust, exposed steel, and residue from prior repairs. Our goal is to preserve factory E-coat and sound paint while removing only compromised material. We then reduce old urethane to a thin, uniform base layer rather than grinding to bare metal, because fresh urethane bonds best to a properly prepared, consistent substrate. If rust cleanup or a cutting nick exposes bare metal, we treat the area with the correct refinish/body primer per manufacturer guidance and apply pinchweld primer when required by the adhesive system. On the glass side, we clean the bond band and use the appropriate activator or frit primer as specified to promote adhesion and UV protection at the bond line. Contamination control is non-negotiable: no silicone products, no household cleaners, no oily fingerprints, and no skipped flash times. We dry-fit the quarter glass to confirm reveal, seating depth, and trim engagement, then mask adjacent paint for clean edges and minimal cleanup. This prep helps your Toyota Verso-S perform like an OEM seal and reduces the chance of leaks and future corrosion.
Urethane Bonding and Minimum Drive-Away Time for Toyota Verso-S: SDAT Factors You Must Follow
Urethane bonding is the step that decides whether your Toyota Verso-S quarter window replacement stays quiet and watertight or develops leaks and wind noise. Bang AutoGlass uses automotive-grade urethane and applies a continuous, properly sized bead to maintain correct stand-off, seat depth, and support for surrounding moldings. Corners and transitions are treated carefully because thin spots can become leak paths. We set the quarter glass on its locators, align it to body lines, and confirm uniform contact around the perimeter without over-compressing the bead. The glass is then stabilized so it cannot shift while curing begins. Safe Drive-Away Time (SDAT) is mandatory and depends on the specific urethane system plus ambient temperature and relative humidity. Cooler, drier conditions typically slow cure, while warmer, more humid air generally accelerates it, which is why professional adhesive systems publish SDAT procedures and charts. As our baseline standard, we require at least one full hour before your Toyota Verso-S is considered safe to drive, even though the install often takes about 30–45 minutes. During early cure, avoid door slams, aggressive window operation, and rough roads that flex the body opening. For best results, postpone high-pressure washing for 24–48 hours and keep the bond line undisturbed. Need convenience? Our mobile auto glass service comes to you, and we work with all insurance companies when comprehensive coverage applies.
Final Quality Checks: Leak Test, Wind Noise, Trim Fit, and Documentation for Toyota Verso-S
Our last phase on a Toyota Verso-S quarter window replacement is inspection and validation, because an install that looks fine can still leak or whistle if alignment and trim engagement are off by millimeters. We start with a full visual check from inside and outside, confirming the quarter glass is seated evenly, the reveal line is consistent, and the molding/encapsulation is flush with the body with no waves, corner lifts, or gaps. We verify the surrounding trim fits without stress, then re-check interior panel clips and fasteners to prevent future rattles in the quarter and cargo area. Next, we perform a controlled water test using steady flow along the perimeter while observing the interior edge and quarter cavity for any moisture. If wind noise is a concern, we focus on perimeter contact points and trim alignment, since small edge separations can become very noticeable at speed. We then clean the glass, remove protective tape, and ensure the vehicle is returned in clean condition with no residue on paint or plastics. To close out, we provide documentation: glass identification markings, installation notes, and aftercare guidance, including honoring the minimum one-hour safe drive-away time and avoiding high-pressure washes for 24–48 hours. You also receive warranty information so there is a straightforward path to support if you ever need it. If comprehensive insurance coverage applies, Bang AutoGlass can coordinate claim documentation with the insurer to keep the process efficient. The result is a Toyota Verso-S quarter window replacement that is verified, documented, and ready for normal use.
Services
Service Areas
Cleanup After Quarter Window Breakage on Toyota Verso-S: Safe Glass Removal and Interior Protection
With a broken quarter window on your Toyota Verso-S, cleanup is where small mistakes turn into scratches, lingering glass, and drafts from a rushed cover. Because quarter glass is tempered, it breaks into pellets that migrate into carpet, seat rails, and storage pockets. Secure the vehicle first: keep children and pets away, wear eye protection and cut-resistant gloves, and remove loose items that can hide shards. Lift the largest pieces from the opening and lower ledge rather than pressing down. Scoop with a dustpan or stiff cardboard, then vacuum in passes with a hose and crevice tool, starting at trim seams and working down through seats, carpet, and floor mats. Skip aggressive sweeping; it drives fine glass deeper into fabric. For upholstery, press wide painter’s tape or use a lint roller to capture the grit you can’t see, and wipe hard plastics with a damp microfiber. If you need a short-term weather shield, tape plastic sheeting from the inside with painter’s tape so it sheds rain without pulling paint or leaving residue. Then schedule Bang AutoGlass for mobile quarter window replacement—we arrive with the correct glass, complete final cleanup, and often restore your Toyota Verso-S as soon as next day.
Verify the Correct Quarter Glass for Toyota Verso-S: Fixed vs Pop-Out, Tint Match, and DOT Markings
Before we install a quarter window on your Toyota Verso-S, we confirm the exact part and configuration so you don’t end up with a trim gap, slow leak, or a tint mismatch. First we identify the window style: fixed, urethane-bonded quarter glass versus a pop-out/vent unit with hinges, latches, and a different frame. We verify your Toyota Verso-S body style, model-year range, and left/right orientation. Next we match appearance—clear versus factory privacy tint, shade consistency, and how any existing film will affect the final tone. We also confirm compliance markings on the glass “bug,” including DOT and safety identifiers and the correct AS rating for non-windshield glazing. Many quarter windows are supplied as an encapsulated assembly with bonded molding, studs, locator pins, or clips; those components control seating depth, reveal lines, and how interior panels snap back in without stress. When applicable, we verify embedded features such as antenna elements so functionality is retained. The goal is an OEM-style Toyota Verso-S quarter window replacement that seals and looks factory. If comprehensive coverage applies, Bang AutoGlass works with all insurance companies and can assist with claim steps on-site.
Remove Trim and Old Glass: Toyota Verso-S Quarter Window Replacement Disassembly Checklist
Replacing the quarter window on a Toyota Verso-S requires disciplined disassembly: gain access cleanly, protect paint, and preserve clips so the vehicle reassembles without rattles. We begin by preparing the area—opening another door or window to reduce pressure changes, powering down accessories, and masking nearby paint and weatherstrips. From the inside, we remove only the trim needed to reach the quarter opening, which may include a rear seat bolster, quarter trim, and cargo-side panels. Non-marring tools are used throughout, and fasteners are labeled so each clip and screw returns to its original position. We’re careful around seatbelt anchors and curtain airbag zones to avoid damage and warning lights. Removal method depends on the Toyota Verso-S design: bonded glass is released by cutting the urethane bead without gouging the pinchweld; bolt-in or framed styles require supporting the glass as retainers are removed. After the old glass is out, we clear remaining pellets, address any distorted molding, and stage the opening with proper bond prep, including a dry fit when locator pins are used. Most mobile quarter window replacements take about 30–45 minutes for the swap, then we recommend cure time before safe drive-away.
Prep the Pinchweld and Bond Area: Corrosion Checks, Primers, and Adhesion Readiness
A durable quarter window replacement for your Toyota Verso-S is won in bond preparation. With bonded quarter glass, the pinchweld (metal flange) must be clean, stable, and compatible with the urethane system, or you risk water intrusion into the quarter cavity and corrosion spreading under paint. Bang AutoGlass begins with a corrosion and coating assessment, looking for bubbling paint, surface rust, exposed steel, and residue from prior repairs. Our goal is to preserve factory E-coat and sound paint while removing only compromised material. We then reduce old urethane to a thin, uniform base layer rather than grinding to bare metal, because fresh urethane bonds best to a properly prepared, consistent substrate. If rust cleanup or a cutting nick exposes bare metal, we treat the area with the correct refinish/body primer per manufacturer guidance and apply pinchweld primer when required by the adhesive system. On the glass side, we clean the bond band and use the appropriate activator or frit primer as specified to promote adhesion and UV protection at the bond line. Contamination control is non-negotiable: no silicone products, no household cleaners, no oily fingerprints, and no skipped flash times. We dry-fit the quarter glass to confirm reveal, seating depth, and trim engagement, then mask adjacent paint for clean edges and minimal cleanup. This prep helps your Toyota Verso-S perform like an OEM seal and reduces the chance of leaks and future corrosion.
Urethane Bonding and Minimum Drive-Away Time for Toyota Verso-S: SDAT Factors You Must Follow
Urethane bonding is the step that decides whether your Toyota Verso-S quarter window replacement stays quiet and watertight or develops leaks and wind noise. Bang AutoGlass uses automotive-grade urethane and applies a continuous, properly sized bead to maintain correct stand-off, seat depth, and support for surrounding moldings. Corners and transitions are treated carefully because thin spots can become leak paths. We set the quarter glass on its locators, align it to body lines, and confirm uniform contact around the perimeter without over-compressing the bead. The glass is then stabilized so it cannot shift while curing begins. Safe Drive-Away Time (SDAT) is mandatory and depends on the specific urethane system plus ambient temperature and relative humidity. Cooler, drier conditions typically slow cure, while warmer, more humid air generally accelerates it, which is why professional adhesive systems publish SDAT procedures and charts. As our baseline standard, we require at least one full hour before your Toyota Verso-S is considered safe to drive, even though the install often takes about 30–45 minutes. During early cure, avoid door slams, aggressive window operation, and rough roads that flex the body opening. For best results, postpone high-pressure washing for 24–48 hours and keep the bond line undisturbed. Need convenience? Our mobile auto glass service comes to you, and we work with all insurance companies when comprehensive coverage applies.
Final Quality Checks: Leak Test, Wind Noise, Trim Fit, and Documentation for Toyota Verso-S
Our last phase on a Toyota Verso-S quarter window replacement is inspection and validation, because an install that looks fine can still leak or whistle if alignment and trim engagement are off by millimeters. We start with a full visual check from inside and outside, confirming the quarter glass is seated evenly, the reveal line is consistent, and the molding/encapsulation is flush with the body with no waves, corner lifts, or gaps. We verify the surrounding trim fits without stress, then re-check interior panel clips and fasteners to prevent future rattles in the quarter and cargo area. Next, we perform a controlled water test using steady flow along the perimeter while observing the interior edge and quarter cavity for any moisture. If wind noise is a concern, we focus on perimeter contact points and trim alignment, since small edge separations can become very noticeable at speed. We then clean the glass, remove protective tape, and ensure the vehicle is returned in clean condition with no residue on paint or plastics. To close out, we provide documentation: glass identification markings, installation notes, and aftercare guidance, including honoring the minimum one-hour safe drive-away time and avoiding high-pressure washes for 24–48 hours. You also receive warranty information so there is a straightforward path to support if you ever need it. If comprehensive insurance coverage applies, Bang AutoGlass can coordinate claim documentation with the insurer to keep the process efficient. The result is a Toyota Verso-S quarter window replacement that is verified, documented, and ready for normal use.
Services
Service Areas
Cleanup After Quarter Window Breakage on Toyota Verso-S: Safe Glass Removal and Interior Protection
With a broken quarter window on your Toyota Verso-S, cleanup is where small mistakes turn into scratches, lingering glass, and drafts from a rushed cover. Because quarter glass is tempered, it breaks into pellets that migrate into carpet, seat rails, and storage pockets. Secure the vehicle first: keep children and pets away, wear eye protection and cut-resistant gloves, and remove loose items that can hide shards. Lift the largest pieces from the opening and lower ledge rather than pressing down. Scoop with a dustpan or stiff cardboard, then vacuum in passes with a hose and crevice tool, starting at trim seams and working down through seats, carpet, and floor mats. Skip aggressive sweeping; it drives fine glass deeper into fabric. For upholstery, press wide painter’s tape or use a lint roller to capture the grit you can’t see, and wipe hard plastics with a damp microfiber. If you need a short-term weather shield, tape plastic sheeting from the inside with painter’s tape so it sheds rain without pulling paint or leaving residue. Then schedule Bang AutoGlass for mobile quarter window replacement—we arrive with the correct glass, complete final cleanup, and often restore your Toyota Verso-S as soon as next day.
Verify the Correct Quarter Glass for Toyota Verso-S: Fixed vs Pop-Out, Tint Match, and DOT Markings
Before we install a quarter window on your Toyota Verso-S, we confirm the exact part and configuration so you don’t end up with a trim gap, slow leak, or a tint mismatch. First we identify the window style: fixed, urethane-bonded quarter glass versus a pop-out/vent unit with hinges, latches, and a different frame. We verify your Toyota Verso-S body style, model-year range, and left/right orientation. Next we match appearance—clear versus factory privacy tint, shade consistency, and how any existing film will affect the final tone. We also confirm compliance markings on the glass “bug,” including DOT and safety identifiers and the correct AS rating for non-windshield glazing. Many quarter windows are supplied as an encapsulated assembly with bonded molding, studs, locator pins, or clips; those components control seating depth, reveal lines, and how interior panels snap back in without stress. When applicable, we verify embedded features such as antenna elements so functionality is retained. The goal is an OEM-style Toyota Verso-S quarter window replacement that seals and looks factory. If comprehensive coverage applies, Bang AutoGlass works with all insurance companies and can assist with claim steps on-site.
Remove Trim and Old Glass: Toyota Verso-S Quarter Window Replacement Disassembly Checklist
Replacing the quarter window on a Toyota Verso-S requires disciplined disassembly: gain access cleanly, protect paint, and preserve clips so the vehicle reassembles without rattles. We begin by preparing the area—opening another door or window to reduce pressure changes, powering down accessories, and masking nearby paint and weatherstrips. From the inside, we remove only the trim needed to reach the quarter opening, which may include a rear seat bolster, quarter trim, and cargo-side panels. Non-marring tools are used throughout, and fasteners are labeled so each clip and screw returns to its original position. We’re careful around seatbelt anchors and curtain airbag zones to avoid damage and warning lights. Removal method depends on the Toyota Verso-S design: bonded glass is released by cutting the urethane bead without gouging the pinchweld; bolt-in or framed styles require supporting the glass as retainers are removed. After the old glass is out, we clear remaining pellets, address any distorted molding, and stage the opening with proper bond prep, including a dry fit when locator pins are used. Most mobile quarter window replacements take about 30–45 minutes for the swap, then we recommend cure time before safe drive-away.
Prep the Pinchweld and Bond Area: Corrosion Checks, Primers, and Adhesion Readiness
A durable quarter window replacement for your Toyota Verso-S is won in bond preparation. With bonded quarter glass, the pinchweld (metal flange) must be clean, stable, and compatible with the urethane system, or you risk water intrusion into the quarter cavity and corrosion spreading under paint. Bang AutoGlass begins with a corrosion and coating assessment, looking for bubbling paint, surface rust, exposed steel, and residue from prior repairs. Our goal is to preserve factory E-coat and sound paint while removing only compromised material. We then reduce old urethane to a thin, uniform base layer rather than grinding to bare metal, because fresh urethane bonds best to a properly prepared, consistent substrate. If rust cleanup or a cutting nick exposes bare metal, we treat the area with the correct refinish/body primer per manufacturer guidance and apply pinchweld primer when required by the adhesive system. On the glass side, we clean the bond band and use the appropriate activator or frit primer as specified to promote adhesion and UV protection at the bond line. Contamination control is non-negotiable: no silicone products, no household cleaners, no oily fingerprints, and no skipped flash times. We dry-fit the quarter glass to confirm reveal, seating depth, and trim engagement, then mask adjacent paint for clean edges and minimal cleanup. This prep helps your Toyota Verso-S perform like an OEM seal and reduces the chance of leaks and future corrosion.
Urethane Bonding and Minimum Drive-Away Time for Toyota Verso-S: SDAT Factors You Must Follow
Urethane bonding is the step that decides whether your Toyota Verso-S quarter window replacement stays quiet and watertight or develops leaks and wind noise. Bang AutoGlass uses automotive-grade urethane and applies a continuous, properly sized bead to maintain correct stand-off, seat depth, and support for surrounding moldings. Corners and transitions are treated carefully because thin spots can become leak paths. We set the quarter glass on its locators, align it to body lines, and confirm uniform contact around the perimeter without over-compressing the bead. The glass is then stabilized so it cannot shift while curing begins. Safe Drive-Away Time (SDAT) is mandatory and depends on the specific urethane system plus ambient temperature and relative humidity. Cooler, drier conditions typically slow cure, while warmer, more humid air generally accelerates it, which is why professional adhesive systems publish SDAT procedures and charts. As our baseline standard, we require at least one full hour before your Toyota Verso-S is considered safe to drive, even though the install often takes about 30–45 minutes. During early cure, avoid door slams, aggressive window operation, and rough roads that flex the body opening. For best results, postpone high-pressure washing for 24–48 hours and keep the bond line undisturbed. Need convenience? Our mobile auto glass service comes to you, and we work with all insurance companies when comprehensive coverage applies.
Final Quality Checks: Leak Test, Wind Noise, Trim Fit, and Documentation for Toyota Verso-S
Our last phase on a Toyota Verso-S quarter window replacement is inspection and validation, because an install that looks fine can still leak or whistle if alignment and trim engagement are off by millimeters. We start with a full visual check from inside and outside, confirming the quarter glass is seated evenly, the reveal line is consistent, and the molding/encapsulation is flush with the body with no waves, corner lifts, or gaps. We verify the surrounding trim fits without stress, then re-check interior panel clips and fasteners to prevent future rattles in the quarter and cargo area. Next, we perform a controlled water test using steady flow along the perimeter while observing the interior edge and quarter cavity for any moisture. If wind noise is a concern, we focus on perimeter contact points and trim alignment, since small edge separations can become very noticeable at speed. We then clean the glass, remove protective tape, and ensure the vehicle is returned in clean condition with no residue on paint or plastics. To close out, we provide documentation: glass identification markings, installation notes, and aftercare guidance, including honoring the minimum one-hour safe drive-away time and avoiding high-pressure washes for 24–48 hours. You also receive warranty information so there is a straightforward path to support if you ever need it. If comprehensive insurance coverage applies, Bang AutoGlass can coordinate claim documentation with the insurer to keep the process efficient. The result is a Toyota Verso-S quarter window replacement that is verified, documented, and ready for normal use.
Enjoy More Relevant Blogs
OEM-Quality Quarter Glass Replacement for Toyota Verso-S: Fit, Trim, and Weather-Seal Checklist
OEM-quality quarter glass replacement for Toyota Verso-S: fit, trim, and weather-seal checklist for correct install, leak prevention, and clean finish.
How Long After Toyota Verso-S Quarter Panel Glass Replacement Can You Drive or Wash the Car? Urethane Cure-Time Rules
After Toyota Verso-S quarter panel glass replacement, learn safe drive-away time, when to wash, and urethane cure rules that help prevent leaks and wind noise.
Fixed Quarter Window vs Vent Glass on Toyota Verso-S: Ordering the Correct Replacement
Fixed quarter window vs vent glass on Toyota Verso-S: how to identify yours and order the correct replacement for fit, sealing, and safety—read this now.
How to Schedule Mobile Quarter Glass Replacement for Toyota Verso-S
Need mobile quarter glass replacement for Toyota Verso-S? Follow our scheduling checklist, photos to take, timing, and on-site tips to restore security.
How Much Does Toyota Verso-S Quarter Panel Glass Replacement Cost? Insurance Deductibles, Estimates, and Ways to Save
Cost to replace Toyota Verso-S quarter panel glass: key price factors, OEM vs aftermarket options, insurance deductibles, estimates, and smart ways to save.
Safety Standards Explained: DOT Markings and FMVSS 205 for Toyota Verso-S Quarter Glass Replacement
DOT markings and FMVSS 205 explained for Toyota Verso-S quarter glass replacement—how to verify safety markings and choose compliant OEM-quality glass.
Stop Leaks and Wind Noise: What Proper Toyota Verso-S Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Toyota Verso-S quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
After a Break-In: Toyota Verso-S Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Toyota Verso-S, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Tint & Privacy Glass Match Guide: Toyota Verso-S Quarter Glass Replacement Done Right
Tint and privacy match guide for Toyota Verso-S quarter glass replacement—how to match shade, markings, and fit so the new glass looks factory-perfect.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm