Services
Service Areas
OEM Calibration Requirements for Toyota Yaris Hatchback: How to Confirm What Must Be Calibrated
Start With VIN-Specific ADAS Feature Identification for Toyota Yaris Hatchback
OEM ADAS Calibration requirements for a Toyota Yaris Hatchback are only reliable when you start from a VIN-verified ADAS configuration. ADAS content is option-driven, so two Toyota Yaris Hatchback vehicles can have different camera or radar packages even if they share the same appearance. Decode the VIN, confirm option codes, and list the driver-assist features present: lane keeping or centering, adaptive cruise, forward collision warning, automatic emergency braking, traffic sign recognition, blind-spot monitoring and rear cross-traffic alerts, and any parking or surround-view features. Next, connect features to hardware by confirming sensor locations and the modules that process them. For many Toyota Yaris Hatchback setups, that means a forward camera behind the windshield and radar sensors in the grille or bumper area, plus any corner sensors used for cross-traffic logic. Note supporting sensors the OEM may treat as prerequisites (steering angle, yaw rate, ride-height). Document the configuration in a short VIN record: features present, sensors and modules present, and mounting locations. With that foundation, decisions about static calibration, dynamic calibration, sequencing, and proof are tied to the exact Toyota Yaris Hatchback you serviced, not assumptions that can lead to intermittent warnings later. This inventory clarifies which repairs can disturb geometry and which modules must be validated.
Find the OEM Source of Truth: Service Info, Bulletins, and Position Statements
After the VIN-specific sensor set is confirmed, anchor ADAS Calibration decisions to OEM documentation for Toyota Yaris Hatchback. The factory service procedure for the applicable year and package is the governing reference, and TSBs or OEM position statements may update triggers, prerequisites, or sequencing after windshield replacement, camera bracket service, collision repairs, bumper removal, or alignment changes. These sources define which module requires ADAS Calibration, what events trigger it, and what “completed” means in terms of status and acceptance criteria. They also specify the method: static (target-based), dynamic (drive-cycle based), a combined sequence, or a limited initialization/relearn routine when allowed. For static routines, capture target type, placement distances, height and centerline references, lighting requirements, and floor-level tolerances. For dynamic routines, capture speed windows, lane-marking quality requirements, and the time or distance needed for completion. Use scan-tool prompts to run the steps, but treat the OEM procedure as policy when there is a discrepancy. During review, flag common blockers: ignition-state requirements, stable voltage, alignment prerequisites, steering-angle prerequisites, and DTC states that prevent ADAS Calibration from starting or completing. Convert the rules into a short checklist (trigger → module → method → prerequisites → proof) so decisions stay consistent across repeated jobs.
Map Calibration Triggers on Toyota Yaris Hatchback: What Repairs Commonly Require Recalibration
A trigger map is a fast way to confirm what must be calibrated on a Toyota Yaris Hatchback for OEM ADAS Calibration. Start with windshield-related events: if the forward camera mounts behind the glass, windshield replacement commonly requires calibration because camera seating, bracket alignment, and the camera-to-glass relationship define the optical axis. Any bracket replacement, re-bond, or movement is a direct trigger when the OEM specifies ADAS Calibration. Next, evaluate front-end work. Radar sensors and brackets in the grille or bumper area can be disturbed during collision repairs, bumper removal, grille replacement, or bracket service, and recalibration may be required even if no warning light is present. Add geometry triggers: wheel alignment changes, toe/camber adjustments, suspension repairs, ride-height changes, or tire-size changes can alter how the Toyota Yaris Hatchback interprets lane position and relative motion. Include sensor movement as a trigger even when a sensor is not replaced; small shifts can skew distance or lane calculations while communication checks still pass. Finally, identify module-specific initialization triggers (steering-angle relearn, yaw-rate reset, battery disconnect effects) that may require a relearn routine instead of full calibration, depending on OEM rules. Document the map as repair event → mount disturbed → module affected → required method so you don’t calibrate one system while missing another.
Run a Pre-Scan and Baseline Checks: DTCs, Warning Lights, and Prerequisites
A reliable way to validate OEM ADAS Calibration needs on Toyota Yaris Hatchback is to treat the pre-scan and baseline checks as mandatory. Perform a comprehensive pre-scan of ADAS modules and record active and stored DTCs, calibration-required indicators, and status fields showing incomplete learning. Many vehicles request calibration without a constant dash light, so scan output is the confirmation layer; save it for the VIN. Next, verify prerequisites that impact accuracy: correct tire pressure, matched tire size, normal ride height, and stable battery voltage so module communication stays solid. Inspect the camera viewing path: clean the glass at the camera window, confirm the housing is seated, and remove tint edges, adhesives, trim, or accessories that obstruct the field of view. For radar-equipped Toyota Yaris Hatchback variants, inspect brackets and covers for bends, misalignment, or loose fasteners; calibration will not correct a distorted mount. If recent alignment or suspension work occurred, confirm alignment angles are in spec and steering angle readings make sense. For static ADAS Calibration, confirm your setup can meet OEM conditions (level floor, target placement, lighting control) before starting. This gate prevents repeated failures and reduces unstable alerts after delivery.
Choose the Correct Method: Static vs Dynamic Calibration vs Initialization for Toyota Yaris Hatchback
Choosing the OEM method for ADAS Calibration on Toyota Yaris Hatchback is a decision step, not a preference. The procedure may require static calibration, dynamic calibration, a combined sequence, or an initialization/relearn routine, depending on the sensor package and the trigger event. Static ADAS Calibration uses targets and measurements to validate geometry in a controlled space, so it is sensitive to target distance and height, centerline references, lighting, and floor level. Dynamic ADAS Calibration relies on an OEM-defined drive cycle, so it is sensitive to speed window, lane-marking quality, traffic, and weather. Some Toyota Yaris Hatchback variants require both methods in sequence, and changing the order can leave modules incomplete. Initialization may be required after certain resets (for example, steering angle or yaw-rate relearn), but it does not replace calibration when the OEM calls for it after windshield or bracket disturbance. Use scan evidence and VIN-applicable service information to decide: if DTCs indicate calibration required, follow the routine tied to those codes. Do not start static without the correct target setup, and do not start dynamic if you cannot safely meet the drive requirements. Fix mounting or geometry issues first; calibration cannot compensate for a bent bracket or mis-seated camera.
Verify and Document: Post-Scan Reports, Results, and Proof for Toyota Yaris Hatchback
Complete OEM ADAS Calibration on Toyota Yaris Hatchback with verification and a defensible proof package. Run a post-scan to confirm calibration-related DTCs are cleared, calibration-required flags are resolved, and module status fields show completion. Save any calibration report or session log that identifies the method performed (static, dynamic, combined, or initialization) with timestamps and module identifiers, and pair it with the pre-scan for a clear before-and-after record tied to the VIN. Finish with a physical inspection: confirm camera and radar housings are seated, the viewing area is clean, and no trim, tint edges, adhesives, or accessories obstruct sensors. For dynamic routines, verify completion by scan status rather than assuming time or distance equals success. Where safe, perform a controlled road validation on clearly marked roads and confirm indicators behave normally without erratic warnings. If warnings persist, avoid repeatedly clearing codes; use scan data to identify missing prerequisites, another module that still needs calibration, or a mounting/geometry issue. Document key prerequisites met (tire pressure, ride height, voltage stability, alignment status) in the job record to reduce comebacks. This also supports warranty and insurance follow-up.
Services
Service Areas
OEM Calibration Requirements for Toyota Yaris Hatchback: How to Confirm What Must Be Calibrated
Start With VIN-Specific ADAS Feature Identification for Toyota Yaris Hatchback
OEM ADAS Calibration requirements for a Toyota Yaris Hatchback are only reliable when you start from a VIN-verified ADAS configuration. ADAS content is option-driven, so two Toyota Yaris Hatchback vehicles can have different camera or radar packages even if they share the same appearance. Decode the VIN, confirm option codes, and list the driver-assist features present: lane keeping or centering, adaptive cruise, forward collision warning, automatic emergency braking, traffic sign recognition, blind-spot monitoring and rear cross-traffic alerts, and any parking or surround-view features. Next, connect features to hardware by confirming sensor locations and the modules that process them. For many Toyota Yaris Hatchback setups, that means a forward camera behind the windshield and radar sensors in the grille or bumper area, plus any corner sensors used for cross-traffic logic. Note supporting sensors the OEM may treat as prerequisites (steering angle, yaw rate, ride-height). Document the configuration in a short VIN record: features present, sensors and modules present, and mounting locations. With that foundation, decisions about static calibration, dynamic calibration, sequencing, and proof are tied to the exact Toyota Yaris Hatchback you serviced, not assumptions that can lead to intermittent warnings later. This inventory clarifies which repairs can disturb geometry and which modules must be validated.
Find the OEM Source of Truth: Service Info, Bulletins, and Position Statements
After the VIN-specific sensor set is confirmed, anchor ADAS Calibration decisions to OEM documentation for Toyota Yaris Hatchback. The factory service procedure for the applicable year and package is the governing reference, and TSBs or OEM position statements may update triggers, prerequisites, or sequencing after windshield replacement, camera bracket service, collision repairs, bumper removal, or alignment changes. These sources define which module requires ADAS Calibration, what events trigger it, and what “completed” means in terms of status and acceptance criteria. They also specify the method: static (target-based), dynamic (drive-cycle based), a combined sequence, or a limited initialization/relearn routine when allowed. For static routines, capture target type, placement distances, height and centerline references, lighting requirements, and floor-level tolerances. For dynamic routines, capture speed windows, lane-marking quality requirements, and the time or distance needed for completion. Use scan-tool prompts to run the steps, but treat the OEM procedure as policy when there is a discrepancy. During review, flag common blockers: ignition-state requirements, stable voltage, alignment prerequisites, steering-angle prerequisites, and DTC states that prevent ADAS Calibration from starting or completing. Convert the rules into a short checklist (trigger → module → method → prerequisites → proof) so decisions stay consistent across repeated jobs.
Map Calibration Triggers on Toyota Yaris Hatchback: What Repairs Commonly Require Recalibration
A trigger map is a fast way to confirm what must be calibrated on a Toyota Yaris Hatchback for OEM ADAS Calibration. Start with windshield-related events: if the forward camera mounts behind the glass, windshield replacement commonly requires calibration because camera seating, bracket alignment, and the camera-to-glass relationship define the optical axis. Any bracket replacement, re-bond, or movement is a direct trigger when the OEM specifies ADAS Calibration. Next, evaluate front-end work. Radar sensors and brackets in the grille or bumper area can be disturbed during collision repairs, bumper removal, grille replacement, or bracket service, and recalibration may be required even if no warning light is present. Add geometry triggers: wheel alignment changes, toe/camber adjustments, suspension repairs, ride-height changes, or tire-size changes can alter how the Toyota Yaris Hatchback interprets lane position and relative motion. Include sensor movement as a trigger even when a sensor is not replaced; small shifts can skew distance or lane calculations while communication checks still pass. Finally, identify module-specific initialization triggers (steering-angle relearn, yaw-rate reset, battery disconnect effects) that may require a relearn routine instead of full calibration, depending on OEM rules. Document the map as repair event → mount disturbed → module affected → required method so you don’t calibrate one system while missing another.
Run a Pre-Scan and Baseline Checks: DTCs, Warning Lights, and Prerequisites
A reliable way to validate OEM ADAS Calibration needs on Toyota Yaris Hatchback is to treat the pre-scan and baseline checks as mandatory. Perform a comprehensive pre-scan of ADAS modules and record active and stored DTCs, calibration-required indicators, and status fields showing incomplete learning. Many vehicles request calibration without a constant dash light, so scan output is the confirmation layer; save it for the VIN. Next, verify prerequisites that impact accuracy: correct tire pressure, matched tire size, normal ride height, and stable battery voltage so module communication stays solid. Inspect the camera viewing path: clean the glass at the camera window, confirm the housing is seated, and remove tint edges, adhesives, trim, or accessories that obstruct the field of view. For radar-equipped Toyota Yaris Hatchback variants, inspect brackets and covers for bends, misalignment, or loose fasteners; calibration will not correct a distorted mount. If recent alignment or suspension work occurred, confirm alignment angles are in spec and steering angle readings make sense. For static ADAS Calibration, confirm your setup can meet OEM conditions (level floor, target placement, lighting control) before starting. This gate prevents repeated failures and reduces unstable alerts after delivery.
Choose the Correct Method: Static vs Dynamic Calibration vs Initialization for Toyota Yaris Hatchback
Choosing the OEM method for ADAS Calibration on Toyota Yaris Hatchback is a decision step, not a preference. The procedure may require static calibration, dynamic calibration, a combined sequence, or an initialization/relearn routine, depending on the sensor package and the trigger event. Static ADAS Calibration uses targets and measurements to validate geometry in a controlled space, so it is sensitive to target distance and height, centerline references, lighting, and floor level. Dynamic ADAS Calibration relies on an OEM-defined drive cycle, so it is sensitive to speed window, lane-marking quality, traffic, and weather. Some Toyota Yaris Hatchback variants require both methods in sequence, and changing the order can leave modules incomplete. Initialization may be required after certain resets (for example, steering angle or yaw-rate relearn), but it does not replace calibration when the OEM calls for it after windshield or bracket disturbance. Use scan evidence and VIN-applicable service information to decide: if DTCs indicate calibration required, follow the routine tied to those codes. Do not start static without the correct target setup, and do not start dynamic if you cannot safely meet the drive requirements. Fix mounting or geometry issues first; calibration cannot compensate for a bent bracket or mis-seated camera.
Verify and Document: Post-Scan Reports, Results, and Proof for Toyota Yaris Hatchback
Complete OEM ADAS Calibration on Toyota Yaris Hatchback with verification and a defensible proof package. Run a post-scan to confirm calibration-related DTCs are cleared, calibration-required flags are resolved, and module status fields show completion. Save any calibration report or session log that identifies the method performed (static, dynamic, combined, or initialization) with timestamps and module identifiers, and pair it with the pre-scan for a clear before-and-after record tied to the VIN. Finish with a physical inspection: confirm camera and radar housings are seated, the viewing area is clean, and no trim, tint edges, adhesives, or accessories obstruct sensors. For dynamic routines, verify completion by scan status rather than assuming time or distance equals success. Where safe, perform a controlled road validation on clearly marked roads and confirm indicators behave normally without erratic warnings. If warnings persist, avoid repeatedly clearing codes; use scan data to identify missing prerequisites, another module that still needs calibration, or a mounting/geometry issue. Document key prerequisites met (tire pressure, ride height, voltage stability, alignment status) in the job record to reduce comebacks. This also supports warranty and insurance follow-up.
Services
Service Areas
OEM Calibration Requirements for Toyota Yaris Hatchback: How to Confirm What Must Be Calibrated
Start With VIN-Specific ADAS Feature Identification for Toyota Yaris Hatchback
OEM ADAS Calibration requirements for a Toyota Yaris Hatchback are only reliable when you start from a VIN-verified ADAS configuration. ADAS content is option-driven, so two Toyota Yaris Hatchback vehicles can have different camera or radar packages even if they share the same appearance. Decode the VIN, confirm option codes, and list the driver-assist features present: lane keeping or centering, adaptive cruise, forward collision warning, automatic emergency braking, traffic sign recognition, blind-spot monitoring and rear cross-traffic alerts, and any parking or surround-view features. Next, connect features to hardware by confirming sensor locations and the modules that process them. For many Toyota Yaris Hatchback setups, that means a forward camera behind the windshield and radar sensors in the grille or bumper area, plus any corner sensors used for cross-traffic logic. Note supporting sensors the OEM may treat as prerequisites (steering angle, yaw rate, ride-height). Document the configuration in a short VIN record: features present, sensors and modules present, and mounting locations. With that foundation, decisions about static calibration, dynamic calibration, sequencing, and proof are tied to the exact Toyota Yaris Hatchback you serviced, not assumptions that can lead to intermittent warnings later. This inventory clarifies which repairs can disturb geometry and which modules must be validated.
Find the OEM Source of Truth: Service Info, Bulletins, and Position Statements
After the VIN-specific sensor set is confirmed, anchor ADAS Calibration decisions to OEM documentation for Toyota Yaris Hatchback. The factory service procedure for the applicable year and package is the governing reference, and TSBs or OEM position statements may update triggers, prerequisites, or sequencing after windshield replacement, camera bracket service, collision repairs, bumper removal, or alignment changes. These sources define which module requires ADAS Calibration, what events trigger it, and what “completed” means in terms of status and acceptance criteria. They also specify the method: static (target-based), dynamic (drive-cycle based), a combined sequence, or a limited initialization/relearn routine when allowed. For static routines, capture target type, placement distances, height and centerline references, lighting requirements, and floor-level tolerances. For dynamic routines, capture speed windows, lane-marking quality requirements, and the time or distance needed for completion. Use scan-tool prompts to run the steps, but treat the OEM procedure as policy when there is a discrepancy. During review, flag common blockers: ignition-state requirements, stable voltage, alignment prerequisites, steering-angle prerequisites, and DTC states that prevent ADAS Calibration from starting or completing. Convert the rules into a short checklist (trigger → module → method → prerequisites → proof) so decisions stay consistent across repeated jobs.
Map Calibration Triggers on Toyota Yaris Hatchback: What Repairs Commonly Require Recalibration
A trigger map is a fast way to confirm what must be calibrated on a Toyota Yaris Hatchback for OEM ADAS Calibration. Start with windshield-related events: if the forward camera mounts behind the glass, windshield replacement commonly requires calibration because camera seating, bracket alignment, and the camera-to-glass relationship define the optical axis. Any bracket replacement, re-bond, or movement is a direct trigger when the OEM specifies ADAS Calibration. Next, evaluate front-end work. Radar sensors and brackets in the grille or bumper area can be disturbed during collision repairs, bumper removal, grille replacement, or bracket service, and recalibration may be required even if no warning light is present. Add geometry triggers: wheel alignment changes, toe/camber adjustments, suspension repairs, ride-height changes, or tire-size changes can alter how the Toyota Yaris Hatchback interprets lane position and relative motion. Include sensor movement as a trigger even when a sensor is not replaced; small shifts can skew distance or lane calculations while communication checks still pass. Finally, identify module-specific initialization triggers (steering-angle relearn, yaw-rate reset, battery disconnect effects) that may require a relearn routine instead of full calibration, depending on OEM rules. Document the map as repair event → mount disturbed → module affected → required method so you don’t calibrate one system while missing another.
Run a Pre-Scan and Baseline Checks: DTCs, Warning Lights, and Prerequisites
A reliable way to validate OEM ADAS Calibration needs on Toyota Yaris Hatchback is to treat the pre-scan and baseline checks as mandatory. Perform a comprehensive pre-scan of ADAS modules and record active and stored DTCs, calibration-required indicators, and status fields showing incomplete learning. Many vehicles request calibration without a constant dash light, so scan output is the confirmation layer; save it for the VIN. Next, verify prerequisites that impact accuracy: correct tire pressure, matched tire size, normal ride height, and stable battery voltage so module communication stays solid. Inspect the camera viewing path: clean the glass at the camera window, confirm the housing is seated, and remove tint edges, adhesives, trim, or accessories that obstruct the field of view. For radar-equipped Toyota Yaris Hatchback variants, inspect brackets and covers for bends, misalignment, or loose fasteners; calibration will not correct a distorted mount. If recent alignment or suspension work occurred, confirm alignment angles are in spec and steering angle readings make sense. For static ADAS Calibration, confirm your setup can meet OEM conditions (level floor, target placement, lighting control) before starting. This gate prevents repeated failures and reduces unstable alerts after delivery.
Choose the Correct Method: Static vs Dynamic Calibration vs Initialization for Toyota Yaris Hatchback
Choosing the OEM method for ADAS Calibration on Toyota Yaris Hatchback is a decision step, not a preference. The procedure may require static calibration, dynamic calibration, a combined sequence, or an initialization/relearn routine, depending on the sensor package and the trigger event. Static ADAS Calibration uses targets and measurements to validate geometry in a controlled space, so it is sensitive to target distance and height, centerline references, lighting, and floor level. Dynamic ADAS Calibration relies on an OEM-defined drive cycle, so it is sensitive to speed window, lane-marking quality, traffic, and weather. Some Toyota Yaris Hatchback variants require both methods in sequence, and changing the order can leave modules incomplete. Initialization may be required after certain resets (for example, steering angle or yaw-rate relearn), but it does not replace calibration when the OEM calls for it after windshield or bracket disturbance. Use scan evidence and VIN-applicable service information to decide: if DTCs indicate calibration required, follow the routine tied to those codes. Do not start static without the correct target setup, and do not start dynamic if you cannot safely meet the drive requirements. Fix mounting or geometry issues first; calibration cannot compensate for a bent bracket or mis-seated camera.
Verify and Document: Post-Scan Reports, Results, and Proof for Toyota Yaris Hatchback
Complete OEM ADAS Calibration on Toyota Yaris Hatchback with verification and a defensible proof package. Run a post-scan to confirm calibration-related DTCs are cleared, calibration-required flags are resolved, and module status fields show completion. Save any calibration report or session log that identifies the method performed (static, dynamic, combined, or initialization) with timestamps and module identifiers, and pair it with the pre-scan for a clear before-and-after record tied to the VIN. Finish with a physical inspection: confirm camera and radar housings are seated, the viewing area is clean, and no trim, tint edges, adhesives, or accessories obstruct sensors. For dynamic routines, verify completion by scan status rather than assuming time or distance equals success. Where safe, perform a controlled road validation on clearly marked roads and confirm indicators behave normally without erratic warnings. If warnings persist, avoid repeatedly clearing codes; use scan data to identify missing prerequisites, another module that still needs calibration, or a mounting/geometry issue. Document key prerequisites met (tire pressure, ride height, voltage stability, alignment status) in the job record to reduce comebacks. This also supports warranty and insurance follow-up.
Enjoy More Relevant Blogs
ADAS Warning Lights on Toyota Yaris Hatchback: When Calibration Is the Fix and When It’s Not
ADAS warning lights on your Toyota Yaris Hatchback? Learn when calibration fixes lane assist or AEB issues, when it will not, and what to check next. Schedule help.
ADAS Calibration Checklist for Toyota Yaris Hatchback: Documentation, Verification, and Final Safety Checks
ADAS calibration checklist for Toyota Yaris Hatchback: documentation to request, scans to verify, and safety checks that confirm cameras and sensors are set right.
How Much Does ADAS Calibration Cost for Toyota Yaris Hatchback? What Drives Pricing and What Insurance Typically Covers
How much does ADAS calibration cost for a Toyota Yaris Hatchback? Learn pricing drivers, camera vs radar needs, labor time, and what insurance typically covers.
Do You Need ADAS Calibration for Toyota Yaris Hatchback After a Wheel Alignment, Suspension Work, or a Minor Collision?
Do you need ADAS calibration for a Toyota Yaris Hatchback after alignment, suspension work, or a minor collision? Signs, timelines, safety risks, and costs today.
Mobile ADAS Calibration for Toyota Yaris Hatchback: What to Expect On-Site and Why Setup Matters
Mobile ADAS calibration for Toyota Yaris Hatchback: what to expect on-site, space and lighting needs, and why setup and verification matter after repairs today.
Camera Calibration for Toyota Yaris Hatchback: Lane Assist and Forward Collision Accuracy Explained
Need camera calibration for your Toyota Yaris Hatchback? See how calibration affects lane assist and forward collision accuracy after windshield service or repairs.
Static vs Dynamic ADAS Calibration for Toyota Yaris Hatchback: What the Difference Means
Static vs dynamic ADAS calibration for Toyota Yaris Hatchback: key differences, when each is required, how long it takes, and what affects accuracy for safety.
How to Schedule ADAS Calibration for Toyota Yaris Hatchback After Windshield Replacement
Schedule ADAS calibration for Toyota Yaris Hatchback after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
Pre- and Post-Calibration Scans for Toyota Yaris Hatchback: Proving Systems Are Set Correctly
Pre- and post-calibration scans for Toyota Yaris Hatchback: see why scans matter, what they verify, and how reports prove ADAS systems are set correctly after service.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm