Services
Service Areas
ADAS Calibration Checklist for Volkswagen Golf Alltrack: Documentation, Verification, and Final Safety Checks
Identify Volkswagen Golf Alltrack ADAS Systems and OEM Calibration Triggers
Before any ADAS procedure on a Volkswagen Golf Alltrack, document two items: the systems present and the OEM conditions that mandate calibration. Confirm trim and ADAS package content using VIN/build data, then perform a comprehensive diagnostic scan that lists installed ADAS-related modules and configuration details. In practical terms, validate what controls lane functions (often a forward windshield camera), what controls adaptive cruise and forward collision functions (often front radar), and what supports blind spot or parking features (rear radar, ultrasonics, and additional cameras). Where build data and scan results conflict, defer to OEM service information. Align the calibration plan to the OEM trigger list for the work completed. On a Volkswagen Golf Alltrack with a windshield-mounted camera, windshield replacement or camera bracket disturbance commonly requires recalibration because small changes in bracket angle, adhesive thickness, or glass curvature can shift aim. Additional triggers include camera/radar removal and installation, bracket or mounting-surface repair, module replacement or programming, wheel alignment or steering-angle resets, tire-size or ride-height changes, and DTCs indicating lost learned values. Connecting the exact trigger to the correct OEM workflow reduces failures, prevents comebacks, and protects Volkswagen Golf Alltrack safety performance.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
Pre-calibration documentation turns ADAS work on a Volkswagen Golf Alltrack into verifiable, OEM-aligned service. Begin with a pre-repair diagnostic scan to capture a DTC baseline across key modules: camera and radar controllers, ABS/ESC, steering angle, and related body or gateway systems. Most OEM guidance and industry best practices call for both pre- and post-repair scans to surface hidden faults and confirm systems are restored. Next, build a clear repair narrative. Record the customer concern (warning message, lane assist fault, adaptive cruise error), log VIN and mileage, and state what created the calibration requirement: windshield replacement on a Volkswagen Golf Alltrack with a camera bracket, camera or radar R&I, bumper/grille work affecting radar aim, alignment or suspension changes, module replacement, or software updates. Add photos of the windshield, camera bracket, and sensor mounts, plus any pre-existing damage, contamination, or aftermarket modifications that could impact calibration. Close the packet by saving the full pre-scan report (current, pending, and history codes when available), freeze-frame data, and the scan tool platform/software version, plus an OEM-based plan for static, dynamic, or combined calibration. Bang AutoGlass works with all insurers when comprehensive coverage applies, and documentation helps reduce claim delays while supporting our lifetime workmanship warranty.
Vehicle Readiness Checklist for Volkswagen Golf Alltrack: Tires, Alignment, Ride Height, and Sensor/Glass Prep
Successful ADAS calibration starts with putting the Volkswagen Golf Alltrack into the condition the OEM assumes. Confirm tires and wheels are OEM size/spec, inflated to spec, matched side-to-side, and evenly worn. Rolling-radius or pressure differences can skew steering and speed calculations used for lane functions and adaptive cruise control. Verify alignment before calibration, focusing on toe, thrust angle, and steering angle sensor values; if alignment is out of range, results can be unreliable. Confirm ride height and loading. Remove excess cargo, keep normal operating weight, and meet any OEM fuel-level requirement. Address factors that change sensor geometry, such as lift/level kits, non-OEM wheel/tire packages, damaged suspension parts, or collision damage near sensor mounts. Prepare sensors and glass. On a Volkswagen Golf Alltrack with a windshield camera, verify the bracket is secure, the correct windshield is installed, and the camera view zone is clean with no haze, residue, stickers, or tint artifacts. Confirm wipers and cowl fitment, ensure radar and ultrasonic sensors are seated and unobstructed, and remove accessories that block sightlines. A ready-to-calibrate Volkswagen Golf Alltrack reduces failures and supports OEM-compliant results.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
Accurate ADAS calibration on a Volkswagen Golf Alltrack depends on disciplined setup. Verify the bay meets OEM requirements and measure the full working area for level, including where targets and stands will sit. Clean the floor so stands do not shift. Establish vehicle reference: confirm centerline and thrust line, center the steering wheel, keep the vehicle straight, and follow any OEM rules for wheel position or suspension settling. Place targets exactly as specified. Measure from the correct OEM reference points, set distances, offsets, and heights, and keep targets square to the vehicle reference with no obstructions in sensor sight lines. Control lighting and reflections: avoid bright sunlight, windshield glare, LED flicker, deep shadows, and moving reflections that can confuse camera pattern recognition. Validate tools. Use the correct target set for the system (forward camera, radar, surround-view), inspect for fading or damage, confirm measurement devices are accurate, and verify scan tool coverage for the Volkswagen Golf Alltrack. Select the correct routine, document tool and software versions, maintain battery voltage with a maintainer, and follow OEM no-touch procedures. These controls improve first-pass success at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Volkswagen Golf Alltrack
Return-to-road verification for a Volkswagen Golf Alltrack starts with proof. Run a post-scan as soon as calibration completes, confirm modules show success, clear any codes created during the routine, and re-scan to confirm no DTCs remain current or pending. Calibration attempts can leave failure or communication codes even when warning lamps turn off, so a clean, documented post-scan is required. Complete any OEM-directed dynamic calibration or validation drive. Follow the stated conditions for lane markings, speed range, duration, and weather or lighting limits. Use roads with clear lane lines and stable traffic flow so the learning cycle can finish. Confirm lane keeping and lane departure respond predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false trigger. Validate blind spot and rear cross-traffic alerts where equipped. If windshield work was performed on the Volkswagen Golf Alltrack, include cure timing before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and at least one hour of safe drive-away time is recommended for adhesive cure before dynamic driving. Conclude by confirming the instrument cluster is clear. If warnings remain, recheck alignment, tire size, ride height, sensor mounts, and glass fitment, then repeat the OEM calibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Volkswagen Golf Alltrack
Final documentation proves ADAS calibration on a Volkswagen Golf Alltrack was completed correctly and supports OEM and insurance requirements. Create a calibration packet that stands alone: include the calibration report output (VIN, date/time, routine name, modules calibrated, pass or fail) plus pre-scan and post-scan reports showing DTC status before and after service. Add evidence that prerequisites and setup were met, such as photos of sensor areas, target placement, and any required measurements or alignment printouts. If the Volkswagen Golf Alltrack required dynamic calibration or road validation, document the OEM routine name, conditions achieved (route type, speed range, duration), and confirmation that no ADAS warnings remained. Record tooling details commonly requested for compliance or reimbursement: scan tool platform, software version, target set used, and battery support. Provide the customer a copy with the invoice and next steps if a warning returns. Bang AutoGlass works with all carriers when comprehensive coverage applies, and strong documentation reduces claim delays while supporting our lifetime workmanship warranty. Store the packet securely with the work order and retain it per policy for the Volkswagen Golf Alltrack.
Services
Service Areas
ADAS Calibration Checklist for Volkswagen Golf Alltrack: Documentation, Verification, and Final Safety Checks
Identify Volkswagen Golf Alltrack ADAS Systems and OEM Calibration Triggers
Before any ADAS procedure on a Volkswagen Golf Alltrack, document two items: the systems present and the OEM conditions that mandate calibration. Confirm trim and ADAS package content using VIN/build data, then perform a comprehensive diagnostic scan that lists installed ADAS-related modules and configuration details. In practical terms, validate what controls lane functions (often a forward windshield camera), what controls adaptive cruise and forward collision functions (often front radar), and what supports blind spot or parking features (rear radar, ultrasonics, and additional cameras). Where build data and scan results conflict, defer to OEM service information. Align the calibration plan to the OEM trigger list for the work completed. On a Volkswagen Golf Alltrack with a windshield-mounted camera, windshield replacement or camera bracket disturbance commonly requires recalibration because small changes in bracket angle, adhesive thickness, or glass curvature can shift aim. Additional triggers include camera/radar removal and installation, bracket or mounting-surface repair, module replacement or programming, wheel alignment or steering-angle resets, tire-size or ride-height changes, and DTCs indicating lost learned values. Connecting the exact trigger to the correct OEM workflow reduces failures, prevents comebacks, and protects Volkswagen Golf Alltrack safety performance.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
Pre-calibration documentation turns ADAS work on a Volkswagen Golf Alltrack into verifiable, OEM-aligned service. Begin with a pre-repair diagnostic scan to capture a DTC baseline across key modules: camera and radar controllers, ABS/ESC, steering angle, and related body or gateway systems. Most OEM guidance and industry best practices call for both pre- and post-repair scans to surface hidden faults and confirm systems are restored. Next, build a clear repair narrative. Record the customer concern (warning message, lane assist fault, adaptive cruise error), log VIN and mileage, and state what created the calibration requirement: windshield replacement on a Volkswagen Golf Alltrack with a camera bracket, camera or radar R&I, bumper/grille work affecting radar aim, alignment or suspension changes, module replacement, or software updates. Add photos of the windshield, camera bracket, and sensor mounts, plus any pre-existing damage, contamination, or aftermarket modifications that could impact calibration. Close the packet by saving the full pre-scan report (current, pending, and history codes when available), freeze-frame data, and the scan tool platform/software version, plus an OEM-based plan for static, dynamic, or combined calibration. Bang AutoGlass works with all insurers when comprehensive coverage applies, and documentation helps reduce claim delays while supporting our lifetime workmanship warranty.
Vehicle Readiness Checklist for Volkswagen Golf Alltrack: Tires, Alignment, Ride Height, and Sensor/Glass Prep
Successful ADAS calibration starts with putting the Volkswagen Golf Alltrack into the condition the OEM assumes. Confirm tires and wheels are OEM size/spec, inflated to spec, matched side-to-side, and evenly worn. Rolling-radius or pressure differences can skew steering and speed calculations used for lane functions and adaptive cruise control. Verify alignment before calibration, focusing on toe, thrust angle, and steering angle sensor values; if alignment is out of range, results can be unreliable. Confirm ride height and loading. Remove excess cargo, keep normal operating weight, and meet any OEM fuel-level requirement. Address factors that change sensor geometry, such as lift/level kits, non-OEM wheel/tire packages, damaged suspension parts, or collision damage near sensor mounts. Prepare sensors and glass. On a Volkswagen Golf Alltrack with a windshield camera, verify the bracket is secure, the correct windshield is installed, and the camera view zone is clean with no haze, residue, stickers, or tint artifacts. Confirm wipers and cowl fitment, ensure radar and ultrasonic sensors are seated and unobstructed, and remove accessories that block sightlines. A ready-to-calibrate Volkswagen Golf Alltrack reduces failures and supports OEM-compliant results.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
Accurate ADAS calibration on a Volkswagen Golf Alltrack depends on disciplined setup. Verify the bay meets OEM requirements and measure the full working area for level, including where targets and stands will sit. Clean the floor so stands do not shift. Establish vehicle reference: confirm centerline and thrust line, center the steering wheel, keep the vehicle straight, and follow any OEM rules for wheel position or suspension settling. Place targets exactly as specified. Measure from the correct OEM reference points, set distances, offsets, and heights, and keep targets square to the vehicle reference with no obstructions in sensor sight lines. Control lighting and reflections: avoid bright sunlight, windshield glare, LED flicker, deep shadows, and moving reflections that can confuse camera pattern recognition. Validate tools. Use the correct target set for the system (forward camera, radar, surround-view), inspect for fading or damage, confirm measurement devices are accurate, and verify scan tool coverage for the Volkswagen Golf Alltrack. Select the correct routine, document tool and software versions, maintain battery voltage with a maintainer, and follow OEM no-touch procedures. These controls improve first-pass success at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Volkswagen Golf Alltrack
Return-to-road verification for a Volkswagen Golf Alltrack starts with proof. Run a post-scan as soon as calibration completes, confirm modules show success, clear any codes created during the routine, and re-scan to confirm no DTCs remain current or pending. Calibration attempts can leave failure or communication codes even when warning lamps turn off, so a clean, documented post-scan is required. Complete any OEM-directed dynamic calibration or validation drive. Follow the stated conditions for lane markings, speed range, duration, and weather or lighting limits. Use roads with clear lane lines and stable traffic flow so the learning cycle can finish. Confirm lane keeping and lane departure respond predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false trigger. Validate blind spot and rear cross-traffic alerts where equipped. If windshield work was performed on the Volkswagen Golf Alltrack, include cure timing before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and at least one hour of safe drive-away time is recommended for adhesive cure before dynamic driving. Conclude by confirming the instrument cluster is clear. If warnings remain, recheck alignment, tire size, ride height, sensor mounts, and glass fitment, then repeat the OEM calibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Volkswagen Golf Alltrack
Final documentation proves ADAS calibration on a Volkswagen Golf Alltrack was completed correctly and supports OEM and insurance requirements. Create a calibration packet that stands alone: include the calibration report output (VIN, date/time, routine name, modules calibrated, pass or fail) plus pre-scan and post-scan reports showing DTC status before and after service. Add evidence that prerequisites and setup were met, such as photos of sensor areas, target placement, and any required measurements or alignment printouts. If the Volkswagen Golf Alltrack required dynamic calibration or road validation, document the OEM routine name, conditions achieved (route type, speed range, duration), and confirmation that no ADAS warnings remained. Record tooling details commonly requested for compliance or reimbursement: scan tool platform, software version, target set used, and battery support. Provide the customer a copy with the invoice and next steps if a warning returns. Bang AutoGlass works with all carriers when comprehensive coverage applies, and strong documentation reduces claim delays while supporting our lifetime workmanship warranty. Store the packet securely with the work order and retain it per policy for the Volkswagen Golf Alltrack.
Services
Service Areas
ADAS Calibration Checklist for Volkswagen Golf Alltrack: Documentation, Verification, and Final Safety Checks
Identify Volkswagen Golf Alltrack ADAS Systems and OEM Calibration Triggers
Before any ADAS procedure on a Volkswagen Golf Alltrack, document two items: the systems present and the OEM conditions that mandate calibration. Confirm trim and ADAS package content using VIN/build data, then perform a comprehensive diagnostic scan that lists installed ADAS-related modules and configuration details. In practical terms, validate what controls lane functions (often a forward windshield camera), what controls adaptive cruise and forward collision functions (often front radar), and what supports blind spot or parking features (rear radar, ultrasonics, and additional cameras). Where build data and scan results conflict, defer to OEM service information. Align the calibration plan to the OEM trigger list for the work completed. On a Volkswagen Golf Alltrack with a windshield-mounted camera, windshield replacement or camera bracket disturbance commonly requires recalibration because small changes in bracket angle, adhesive thickness, or glass curvature can shift aim. Additional triggers include camera/radar removal and installation, bracket or mounting-surface repair, module replacement or programming, wheel alignment or steering-angle resets, tire-size or ride-height changes, and DTCs indicating lost learned values. Connecting the exact trigger to the correct OEM workflow reduces failures, prevents comebacks, and protects Volkswagen Golf Alltrack safety performance.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
Pre-calibration documentation turns ADAS work on a Volkswagen Golf Alltrack into verifiable, OEM-aligned service. Begin with a pre-repair diagnostic scan to capture a DTC baseline across key modules: camera and radar controllers, ABS/ESC, steering angle, and related body or gateway systems. Most OEM guidance and industry best practices call for both pre- and post-repair scans to surface hidden faults and confirm systems are restored. Next, build a clear repair narrative. Record the customer concern (warning message, lane assist fault, adaptive cruise error), log VIN and mileage, and state what created the calibration requirement: windshield replacement on a Volkswagen Golf Alltrack with a camera bracket, camera or radar R&I, bumper/grille work affecting radar aim, alignment or suspension changes, module replacement, or software updates. Add photos of the windshield, camera bracket, and sensor mounts, plus any pre-existing damage, contamination, or aftermarket modifications that could impact calibration. Close the packet by saving the full pre-scan report (current, pending, and history codes when available), freeze-frame data, and the scan tool platform/software version, plus an OEM-based plan for static, dynamic, or combined calibration. Bang AutoGlass works with all insurers when comprehensive coverage applies, and documentation helps reduce claim delays while supporting our lifetime workmanship warranty.
Vehicle Readiness Checklist for Volkswagen Golf Alltrack: Tires, Alignment, Ride Height, and Sensor/Glass Prep
Successful ADAS calibration starts with putting the Volkswagen Golf Alltrack into the condition the OEM assumes. Confirm tires and wheels are OEM size/spec, inflated to spec, matched side-to-side, and evenly worn. Rolling-radius or pressure differences can skew steering and speed calculations used for lane functions and adaptive cruise control. Verify alignment before calibration, focusing on toe, thrust angle, and steering angle sensor values; if alignment is out of range, results can be unreliable. Confirm ride height and loading. Remove excess cargo, keep normal operating weight, and meet any OEM fuel-level requirement. Address factors that change sensor geometry, such as lift/level kits, non-OEM wheel/tire packages, damaged suspension parts, or collision damage near sensor mounts. Prepare sensors and glass. On a Volkswagen Golf Alltrack with a windshield camera, verify the bracket is secure, the correct windshield is installed, and the camera view zone is clean with no haze, residue, stickers, or tint artifacts. Confirm wipers and cowl fitment, ensure radar and ultrasonic sensors are seated and unobstructed, and remove accessories that block sightlines. A ready-to-calibrate Volkswagen Golf Alltrack reduces failures and supports OEM-compliant results.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
Accurate ADAS calibration on a Volkswagen Golf Alltrack depends on disciplined setup. Verify the bay meets OEM requirements and measure the full working area for level, including where targets and stands will sit. Clean the floor so stands do not shift. Establish vehicle reference: confirm centerline and thrust line, center the steering wheel, keep the vehicle straight, and follow any OEM rules for wheel position or suspension settling. Place targets exactly as specified. Measure from the correct OEM reference points, set distances, offsets, and heights, and keep targets square to the vehicle reference with no obstructions in sensor sight lines. Control lighting and reflections: avoid bright sunlight, windshield glare, LED flicker, deep shadows, and moving reflections that can confuse camera pattern recognition. Validate tools. Use the correct target set for the system (forward camera, radar, surround-view), inspect for fading or damage, confirm measurement devices are accurate, and verify scan tool coverage for the Volkswagen Golf Alltrack. Select the correct routine, document tool and software versions, maintain battery voltage with a maintainer, and follow OEM no-touch procedures. These controls improve first-pass success at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Volkswagen Golf Alltrack
Return-to-road verification for a Volkswagen Golf Alltrack starts with proof. Run a post-scan as soon as calibration completes, confirm modules show success, clear any codes created during the routine, and re-scan to confirm no DTCs remain current or pending. Calibration attempts can leave failure or communication codes even when warning lamps turn off, so a clean, documented post-scan is required. Complete any OEM-directed dynamic calibration or validation drive. Follow the stated conditions for lane markings, speed range, duration, and weather or lighting limits. Use roads with clear lane lines and stable traffic flow so the learning cycle can finish. Confirm lane keeping and lane departure respond predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false trigger. Validate blind spot and rear cross-traffic alerts where equipped. If windshield work was performed on the Volkswagen Golf Alltrack, include cure timing before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and at least one hour of safe drive-away time is recommended for adhesive cure before dynamic driving. Conclude by confirming the instrument cluster is clear. If warnings remain, recheck alignment, tire size, ride height, sensor mounts, and glass fitment, then repeat the OEM calibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Volkswagen Golf Alltrack
Final documentation proves ADAS calibration on a Volkswagen Golf Alltrack was completed correctly and supports OEM and insurance requirements. Create a calibration packet that stands alone: include the calibration report output (VIN, date/time, routine name, modules calibrated, pass or fail) plus pre-scan and post-scan reports showing DTC status before and after service. Add evidence that prerequisites and setup were met, such as photos of sensor areas, target placement, and any required measurements or alignment printouts. If the Volkswagen Golf Alltrack required dynamic calibration or road validation, document the OEM routine name, conditions achieved (route type, speed range, duration), and confirmation that no ADAS warnings remained. Record tooling details commonly requested for compliance or reimbursement: scan tool platform, software version, target set used, and battery support. Provide the customer a copy with the invoice and next steps if a warning returns. Bang AutoGlass works with all carriers when comprehensive coverage applies, and strong documentation reduces claim delays while supporting our lifetime workmanship warranty. Store the packet securely with the work order and retain it per policy for the Volkswagen Golf Alltrack.
Enjoy More Relevant Blogs
Mobile ADAS Calibration for Volkswagen Golf Alltrack: What to Expect On-Site and Why Setup Matters
Mobile ADAS calibration for Volkswagen Golf Alltrack: what to expect on-site, space and lighting needs, and why setup and verification matter after repairs today.
How Much Does ADAS Calibration Cost for Volkswagen Golf Alltrack? What Drives Pricing and What Insurance Typically Covers
How much does ADAS calibration cost for a Volkswagen Golf Alltrack? Learn pricing drivers, camera vs radar needs, labor time, and what insurance typically covers.
OEM Calibration Requirements for Volkswagen Golf Alltrack: How to Confirm What Must Be Calibrated
OEM calibration requirements for Volkswagen Golf Alltrack: how to confirm what must be calibrated after repairs, what triggers recalibration, and what proof to ask for.
Camera Calibration for Volkswagen Golf Alltrack: Lane Assist and Forward Collision Accuracy Explained
Need camera calibration for your Volkswagen Golf Alltrack? See how calibration affects lane assist and forward collision accuracy after windshield service or repairs.
Do You Need ADAS Calibration for Volkswagen Golf Alltrack After a Wheel Alignment, Suspension Work, or a Minor Collision?
Do you need ADAS calibration for a Volkswagen Golf Alltrack after alignment, suspension work, or a minor collision? Signs, timelines, safety risks, and costs today.
Pre- and Post-Calibration Scans for Volkswagen Golf Alltrack: Proving Systems Are Set Correctly
Pre- and post-calibration scans for Volkswagen Golf Alltrack: see why scans matter, what they verify, and how reports prove ADAS systems are set correctly after service.
ADAS Warning Lights on Volkswagen Golf Alltrack: When Calibration Is the Fix and When It’s Not
ADAS warning lights on your Volkswagen Golf Alltrack? Learn when calibration fixes lane assist or AEB issues, when it will not, and what to check next. Schedule help.
Static vs Dynamic ADAS Calibration for Volkswagen Golf Alltrack: What the Difference Means
Static vs dynamic ADAS calibration for Volkswagen Golf Alltrack: key differences, when each is required, how long it takes, and what affects accuracy for safety.
How to Schedule ADAS Calibration for Volkswagen Golf Alltrack After Windshield Replacement
Schedule ADAS calibration for Volkswagen Golf Alltrack after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm