Services
Service Areas
Stop Leaks and Wind Noise: What Proper Bmw 3 Series Gran Turismo Quarter Glass Replacement Should Prevent
Leak and Wind Noise Root Causes on Bmw 3 Series Gran Turismo: Where Bad Sealing Shows Up First
After a Bmw 3 Series Gran Turismo quarter glass replacement (rear quarter window replacement), leaks and wind noise almost always trace back to the seal and bond line—not a “mystery.” The first trouble spots are the outer edges where the fixed rear quarter glass meets the body at the C-pillar, roofline, and beltline. A tiny air gap can whistle or howl at highway speed, while a narrow water path can run behind quarter trim, dampen the headliner, or collect in the rear cargo area or trunk. Common causes are predictable: the wrong-fit quarter glass or molding profile, old urethane that was not close-cut evenly, skipped primer/activator steps, or contamination from fingerprints, dust, wash chemicals, or silicone dressings. Even if the adhesive is strong, trim that is not fully seated can lift in airflow and amplify noise. Hidden pinchweld corrosion can also weaken the bond over time and reopen leak paths. Bang AutoGlass prevents these issues at the source with mobile Bmw 3 Series Gran Turismo quarter glass replacement and auto glass repair, typically completed in 30-45 minutes. We recommend at least one hour of safe drive-away time for the adhesive to set. Every installation is backed by a lifetime workmanship warranty, and we work with all insurance companies when comprehensive coverage applies.
Correct Quarter Glass Verification: Body Location, Tint/Privacy, and DOT/FMVSS 205 Markings
Proper Bmw 3 Series Gran Turismo quarter glass verification should be done before any adhesive is opened. A technician confirms the exact position (left or right rear quarter, fixed side glass) and matches the part to your model year and trim, since small dimensional differences change how the molding seats and how the edge frit band seals. Tint and privacy level must also match—mismatched shading is obvious and can alter the molding-to-glass interface. If your Bmw 3 Series Gran Turismo includes privacy tint, acoustic glass, or an integrated antenna in the quarter area, those features should be confirmed up front. Next, check the safety-glazing markings. In the U.S., quarter glass typically carries “DOT” plus a manufacturer code assigned by NHTSA and an “AS” classification under ANSI/SAE Z26.1 as referenced by FMVSS 205. Side and rear positions commonly show AS2; some darker privacy glass may be marked AS3, while windshields are usually AS1. Bang AutoGlass performs this verification on-site with our mobile service so the right Bmw 3 Series Gran Turismo rear quarter window replacement arrives the first time. We can often schedule next day and support insurance claims across all carriers when comprehensive coverage applies.
Pinchweld and Bond Prep Checklist: Corrosion Control, Cleaning, and Primer/Activator Steps
Most quarter window leaks start with rushed bond prep. For a Bmw 3 Series Gran Turismo quarter glass replacement, the pinchweld must be clean, corrosion-free, and compatible with the urethane system. The workflow should protect interior panels, remove trim and moldings without damaging clips, cut out the old rear quarter glass, and remove every shard and dust particle. Debris in the bond zone creates voids and weakens the seal, especially at tight corners. Old urethane should be close-cut and left as a thin, continuous base (about 1-2 mm). That base gives the fresh bead a stable surface to bond to and helps keep consistent glass height. If bare metal is exposed, treat it immediately: clean, address corrosion, and apply the correct primer so rust cannot creep under the adhesive. Final prep is about sequence and timing: clean and dry the bonding area, apply activator and primer in the manufacturer’s order, use clean applicators and gloves, and allow proper flash time. Bang AutoGlass follows a repeatable pinchweld prep checklist for every mobile Bmw 3 Series Gran Turismo rear quarter window replacement. Most jobs take 30-45 minutes, we recommend at least one hour of safe drive-away time, and every install is backed by a lifetime workmanship warranty.
Adhesive Bead and Set-In Accuracy: Alignment, Edge Support, and Minimum Drive-Away Time
Repeat wind noise after a Bmw 3 Series Gran Turismo quarter glass replacement usually points to uneven urethane coverage or a small alignment error. Because the quarter window is fixed, the urethane bead must seal and support the panel around the full perimeter. Start with a dry-fit, confirm the reveal line, and add simple guide marks at the roofline, C-pillar, and beltline. Then lay a continuous triangular bead with consistent height and width. If the bead is too low, compressed unevenly, or interrupted at a corner, you can end up with an air pocket, a leak path, or a stress point that later breaks the seal. Set-in should be deliberate. Use setting blocks or clips where the design calls for them, then press the glass into wet urethane with even pressure so compression stays consistent. A minor tilt at the C-pillar can lift the molding and create a whistle that only shows up at steady highway speeds. After seating, confirm the panel is flush and backfill any edge gaps so no voids remain. Drive-away time matters too. Follow the adhesive manufacturer’s current cure-time specs. Bang AutoGlass typically completes mobile service in 30-45 minutes and recommends at least one hour before driving your Bmw 3 Series Gran Turismo.
Seal, Trim, and Molding Fit: Preventing Whistles, Air Gaps, and Water Intrusion
Even when the Bmw 3 Series Gran Turismo quarter glass is bonded correctly, the final result depends on factory-style trim and molding fit. Reveal moldings, clips, and perimeter trim manage airflow, shield the urethane bond line from UV and abrasion, and help control water migration. Most wind noise after repair comes from a molding that isn’t fully seated, a clip that never locked, or trim that is distorted, missing, or misrouted at a corner. Those small defects can create an air gap that whistles at 60+ mph or a channel that carries water behind the interior quarter panels. A proper fit check is visual and tactile. The molding should sit flush along the roofline, C-pillar, and beltline with no lifted edges, waves, or gaps. The glass-to-body reveal should stay consistent, and the trim should not pinch the glass or pull it out of plane. On press-in moldings or encapsulated edges, the interface with fresh urethane should be continuous so it won’t lift under airflow or after temperature swings. At Bang AutoGlass, we re-check the perimeter after trim installation, confirm clips and moldings are seated, and back every mobile Bmw 3 Series Gran Turismo quarter glass replacement with a lifetime workmanship warranty.
Post-Install Proof: Water Test, Road Test, and Documentation for Bmw 3 Series Gran Turismo Quarter Glass
A quality Bmw 3 Series Gran Turismo quarter glass replacement should be verified, not assumed. The best installers close the loop with objective checks that confirm sealing, trim fit, and wind-noise performance before the job is considered complete. Start with a controlled water test. Use a gentle, steady stream along the roofline, C-pillar, and beltline perimeter instead of a high-pressure nozzle that can force water past seals. While water runs, inspect inside for seepage near the headliner edge, behind the quarter trim, and in the rear cargo area or trunk. This helps spot trim channeling and micro-gaps at corners. Next, road test at consistent speeds and listen for whistling, flutter, or buffeting around the quarter window area. After the drive, inspect the perimeter again to confirm the molding remained fully seated and the glass stayed flush with uniform gaps. If your Bmw 3 Series Gran Turismo has privacy tint, acoustic glazing, or a quarter-area antenna element, verify alignment and function before closeout. Finally, documentation protects you. Notes and photos support warranty coverage and make insurance claims easier when comprehensive coverage applies. Bang AutoGlass backs workmanship with a lifetime warranty, offers mobile service often as soon as next day, and recommends at least one hour of safe drive-away time after installation.
Services
Service Areas
Stop Leaks and Wind Noise: What Proper Bmw 3 Series Gran Turismo Quarter Glass Replacement Should Prevent
Leak and Wind Noise Root Causes on Bmw 3 Series Gran Turismo: Where Bad Sealing Shows Up First
After a Bmw 3 Series Gran Turismo quarter glass replacement (rear quarter window replacement), leaks and wind noise almost always trace back to the seal and bond line—not a “mystery.” The first trouble spots are the outer edges where the fixed rear quarter glass meets the body at the C-pillar, roofline, and beltline. A tiny air gap can whistle or howl at highway speed, while a narrow water path can run behind quarter trim, dampen the headliner, or collect in the rear cargo area or trunk. Common causes are predictable: the wrong-fit quarter glass or molding profile, old urethane that was not close-cut evenly, skipped primer/activator steps, or contamination from fingerprints, dust, wash chemicals, or silicone dressings. Even if the adhesive is strong, trim that is not fully seated can lift in airflow and amplify noise. Hidden pinchweld corrosion can also weaken the bond over time and reopen leak paths. Bang AutoGlass prevents these issues at the source with mobile Bmw 3 Series Gran Turismo quarter glass replacement and auto glass repair, typically completed in 30-45 minutes. We recommend at least one hour of safe drive-away time for the adhesive to set. Every installation is backed by a lifetime workmanship warranty, and we work with all insurance companies when comprehensive coverage applies.
Correct Quarter Glass Verification: Body Location, Tint/Privacy, and DOT/FMVSS 205 Markings
Proper Bmw 3 Series Gran Turismo quarter glass verification should be done before any adhesive is opened. A technician confirms the exact position (left or right rear quarter, fixed side glass) and matches the part to your model year and trim, since small dimensional differences change how the molding seats and how the edge frit band seals. Tint and privacy level must also match—mismatched shading is obvious and can alter the molding-to-glass interface. If your Bmw 3 Series Gran Turismo includes privacy tint, acoustic glass, or an integrated antenna in the quarter area, those features should be confirmed up front. Next, check the safety-glazing markings. In the U.S., quarter glass typically carries “DOT” plus a manufacturer code assigned by NHTSA and an “AS” classification under ANSI/SAE Z26.1 as referenced by FMVSS 205. Side and rear positions commonly show AS2; some darker privacy glass may be marked AS3, while windshields are usually AS1. Bang AutoGlass performs this verification on-site with our mobile service so the right Bmw 3 Series Gran Turismo rear quarter window replacement arrives the first time. We can often schedule next day and support insurance claims across all carriers when comprehensive coverage applies.
Pinchweld and Bond Prep Checklist: Corrosion Control, Cleaning, and Primer/Activator Steps
Most quarter window leaks start with rushed bond prep. For a Bmw 3 Series Gran Turismo quarter glass replacement, the pinchweld must be clean, corrosion-free, and compatible with the urethane system. The workflow should protect interior panels, remove trim and moldings without damaging clips, cut out the old rear quarter glass, and remove every shard and dust particle. Debris in the bond zone creates voids and weakens the seal, especially at tight corners. Old urethane should be close-cut and left as a thin, continuous base (about 1-2 mm). That base gives the fresh bead a stable surface to bond to and helps keep consistent glass height. If bare metal is exposed, treat it immediately: clean, address corrosion, and apply the correct primer so rust cannot creep under the adhesive. Final prep is about sequence and timing: clean and dry the bonding area, apply activator and primer in the manufacturer’s order, use clean applicators and gloves, and allow proper flash time. Bang AutoGlass follows a repeatable pinchweld prep checklist for every mobile Bmw 3 Series Gran Turismo rear quarter window replacement. Most jobs take 30-45 minutes, we recommend at least one hour of safe drive-away time, and every install is backed by a lifetime workmanship warranty.
Adhesive Bead and Set-In Accuracy: Alignment, Edge Support, and Minimum Drive-Away Time
Repeat wind noise after a Bmw 3 Series Gran Turismo quarter glass replacement usually points to uneven urethane coverage or a small alignment error. Because the quarter window is fixed, the urethane bead must seal and support the panel around the full perimeter. Start with a dry-fit, confirm the reveal line, and add simple guide marks at the roofline, C-pillar, and beltline. Then lay a continuous triangular bead with consistent height and width. If the bead is too low, compressed unevenly, or interrupted at a corner, you can end up with an air pocket, a leak path, or a stress point that later breaks the seal. Set-in should be deliberate. Use setting blocks or clips where the design calls for them, then press the glass into wet urethane with even pressure so compression stays consistent. A minor tilt at the C-pillar can lift the molding and create a whistle that only shows up at steady highway speeds. After seating, confirm the panel is flush and backfill any edge gaps so no voids remain. Drive-away time matters too. Follow the adhesive manufacturer’s current cure-time specs. Bang AutoGlass typically completes mobile service in 30-45 minutes and recommends at least one hour before driving your Bmw 3 Series Gran Turismo.
Seal, Trim, and Molding Fit: Preventing Whistles, Air Gaps, and Water Intrusion
Even when the Bmw 3 Series Gran Turismo quarter glass is bonded correctly, the final result depends on factory-style trim and molding fit. Reveal moldings, clips, and perimeter trim manage airflow, shield the urethane bond line from UV and abrasion, and help control water migration. Most wind noise after repair comes from a molding that isn’t fully seated, a clip that never locked, or trim that is distorted, missing, or misrouted at a corner. Those small defects can create an air gap that whistles at 60+ mph or a channel that carries water behind the interior quarter panels. A proper fit check is visual and tactile. The molding should sit flush along the roofline, C-pillar, and beltline with no lifted edges, waves, or gaps. The glass-to-body reveal should stay consistent, and the trim should not pinch the glass or pull it out of plane. On press-in moldings or encapsulated edges, the interface with fresh urethane should be continuous so it won’t lift under airflow or after temperature swings. At Bang AutoGlass, we re-check the perimeter after trim installation, confirm clips and moldings are seated, and back every mobile Bmw 3 Series Gran Turismo quarter glass replacement with a lifetime workmanship warranty.
Post-Install Proof: Water Test, Road Test, and Documentation for Bmw 3 Series Gran Turismo Quarter Glass
A quality Bmw 3 Series Gran Turismo quarter glass replacement should be verified, not assumed. The best installers close the loop with objective checks that confirm sealing, trim fit, and wind-noise performance before the job is considered complete. Start with a controlled water test. Use a gentle, steady stream along the roofline, C-pillar, and beltline perimeter instead of a high-pressure nozzle that can force water past seals. While water runs, inspect inside for seepage near the headliner edge, behind the quarter trim, and in the rear cargo area or trunk. This helps spot trim channeling and micro-gaps at corners. Next, road test at consistent speeds and listen for whistling, flutter, or buffeting around the quarter window area. After the drive, inspect the perimeter again to confirm the molding remained fully seated and the glass stayed flush with uniform gaps. If your Bmw 3 Series Gran Turismo has privacy tint, acoustic glazing, or a quarter-area antenna element, verify alignment and function before closeout. Finally, documentation protects you. Notes and photos support warranty coverage and make insurance claims easier when comprehensive coverage applies. Bang AutoGlass backs workmanship with a lifetime warranty, offers mobile service often as soon as next day, and recommends at least one hour of safe drive-away time after installation.
Services
Service Areas
Stop Leaks and Wind Noise: What Proper Bmw 3 Series Gran Turismo Quarter Glass Replacement Should Prevent
Leak and Wind Noise Root Causes on Bmw 3 Series Gran Turismo: Where Bad Sealing Shows Up First
After a Bmw 3 Series Gran Turismo quarter glass replacement (rear quarter window replacement), leaks and wind noise almost always trace back to the seal and bond line—not a “mystery.” The first trouble spots are the outer edges where the fixed rear quarter glass meets the body at the C-pillar, roofline, and beltline. A tiny air gap can whistle or howl at highway speed, while a narrow water path can run behind quarter trim, dampen the headliner, or collect in the rear cargo area or trunk. Common causes are predictable: the wrong-fit quarter glass or molding profile, old urethane that was not close-cut evenly, skipped primer/activator steps, or contamination from fingerprints, dust, wash chemicals, or silicone dressings. Even if the adhesive is strong, trim that is not fully seated can lift in airflow and amplify noise. Hidden pinchweld corrosion can also weaken the bond over time and reopen leak paths. Bang AutoGlass prevents these issues at the source with mobile Bmw 3 Series Gran Turismo quarter glass replacement and auto glass repair, typically completed in 30-45 minutes. We recommend at least one hour of safe drive-away time for the adhesive to set. Every installation is backed by a lifetime workmanship warranty, and we work with all insurance companies when comprehensive coverage applies.
Correct Quarter Glass Verification: Body Location, Tint/Privacy, and DOT/FMVSS 205 Markings
Proper Bmw 3 Series Gran Turismo quarter glass verification should be done before any adhesive is opened. A technician confirms the exact position (left or right rear quarter, fixed side glass) and matches the part to your model year and trim, since small dimensional differences change how the molding seats and how the edge frit band seals. Tint and privacy level must also match—mismatched shading is obvious and can alter the molding-to-glass interface. If your Bmw 3 Series Gran Turismo includes privacy tint, acoustic glass, or an integrated antenna in the quarter area, those features should be confirmed up front. Next, check the safety-glazing markings. In the U.S., quarter glass typically carries “DOT” plus a manufacturer code assigned by NHTSA and an “AS” classification under ANSI/SAE Z26.1 as referenced by FMVSS 205. Side and rear positions commonly show AS2; some darker privacy glass may be marked AS3, while windshields are usually AS1. Bang AutoGlass performs this verification on-site with our mobile service so the right Bmw 3 Series Gran Turismo rear quarter window replacement arrives the first time. We can often schedule next day and support insurance claims across all carriers when comprehensive coverage applies.
Pinchweld and Bond Prep Checklist: Corrosion Control, Cleaning, and Primer/Activator Steps
Most quarter window leaks start with rushed bond prep. For a Bmw 3 Series Gran Turismo quarter glass replacement, the pinchweld must be clean, corrosion-free, and compatible with the urethane system. The workflow should protect interior panels, remove trim and moldings without damaging clips, cut out the old rear quarter glass, and remove every shard and dust particle. Debris in the bond zone creates voids and weakens the seal, especially at tight corners. Old urethane should be close-cut and left as a thin, continuous base (about 1-2 mm). That base gives the fresh bead a stable surface to bond to and helps keep consistent glass height. If bare metal is exposed, treat it immediately: clean, address corrosion, and apply the correct primer so rust cannot creep under the adhesive. Final prep is about sequence and timing: clean and dry the bonding area, apply activator and primer in the manufacturer’s order, use clean applicators and gloves, and allow proper flash time. Bang AutoGlass follows a repeatable pinchweld prep checklist for every mobile Bmw 3 Series Gran Turismo rear quarter window replacement. Most jobs take 30-45 minutes, we recommend at least one hour of safe drive-away time, and every install is backed by a lifetime workmanship warranty.
Adhesive Bead and Set-In Accuracy: Alignment, Edge Support, and Minimum Drive-Away Time
Repeat wind noise after a Bmw 3 Series Gran Turismo quarter glass replacement usually points to uneven urethane coverage or a small alignment error. Because the quarter window is fixed, the urethane bead must seal and support the panel around the full perimeter. Start with a dry-fit, confirm the reveal line, and add simple guide marks at the roofline, C-pillar, and beltline. Then lay a continuous triangular bead with consistent height and width. If the bead is too low, compressed unevenly, or interrupted at a corner, you can end up with an air pocket, a leak path, or a stress point that later breaks the seal. Set-in should be deliberate. Use setting blocks or clips where the design calls for them, then press the glass into wet urethane with even pressure so compression stays consistent. A minor tilt at the C-pillar can lift the molding and create a whistle that only shows up at steady highway speeds. After seating, confirm the panel is flush and backfill any edge gaps so no voids remain. Drive-away time matters too. Follow the adhesive manufacturer’s current cure-time specs. Bang AutoGlass typically completes mobile service in 30-45 minutes and recommends at least one hour before driving your Bmw 3 Series Gran Turismo.
Seal, Trim, and Molding Fit: Preventing Whistles, Air Gaps, and Water Intrusion
Even when the Bmw 3 Series Gran Turismo quarter glass is bonded correctly, the final result depends on factory-style trim and molding fit. Reveal moldings, clips, and perimeter trim manage airflow, shield the urethane bond line from UV and abrasion, and help control water migration. Most wind noise after repair comes from a molding that isn’t fully seated, a clip that never locked, or trim that is distorted, missing, or misrouted at a corner. Those small defects can create an air gap that whistles at 60+ mph or a channel that carries water behind the interior quarter panels. A proper fit check is visual and tactile. The molding should sit flush along the roofline, C-pillar, and beltline with no lifted edges, waves, or gaps. The glass-to-body reveal should stay consistent, and the trim should not pinch the glass or pull it out of plane. On press-in moldings or encapsulated edges, the interface with fresh urethane should be continuous so it won’t lift under airflow or after temperature swings. At Bang AutoGlass, we re-check the perimeter after trim installation, confirm clips and moldings are seated, and back every mobile Bmw 3 Series Gran Turismo quarter glass replacement with a lifetime workmanship warranty.
Post-Install Proof: Water Test, Road Test, and Documentation for Bmw 3 Series Gran Turismo Quarter Glass
A quality Bmw 3 Series Gran Turismo quarter glass replacement should be verified, not assumed. The best installers close the loop with objective checks that confirm sealing, trim fit, and wind-noise performance before the job is considered complete. Start with a controlled water test. Use a gentle, steady stream along the roofline, C-pillar, and beltline perimeter instead of a high-pressure nozzle that can force water past seals. While water runs, inspect inside for seepage near the headliner edge, behind the quarter trim, and in the rear cargo area or trunk. This helps spot trim channeling and micro-gaps at corners. Next, road test at consistent speeds and listen for whistling, flutter, or buffeting around the quarter window area. After the drive, inspect the perimeter again to confirm the molding remained fully seated and the glass stayed flush with uniform gaps. If your Bmw 3 Series Gran Turismo has privacy tint, acoustic glazing, or a quarter-area antenna element, verify alignment and function before closeout. Finally, documentation protects you. Notes and photos support warranty coverage and make insurance claims easier when comprehensive coverage applies. Bang AutoGlass backs workmanship with a lifetime warranty, offers mobile service often as soon as next day, and recommends at least one hour of safe drive-away time after installation.
Enjoy More Relevant Blogs
After a Break-In: Bmw 3 Series Gran Turismo Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Bmw 3 Series Gran Turismo, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
How to Schedule Mobile Quarter Glass Replacement for Bmw 3 Series Gran Turismo
Need mobile quarter glass replacement for Bmw 3 Series Gran Turismo? Follow our scheduling checklist, photos to take, timing, and on-site tips to restore security.
Fixed Quarter Window vs Vent Glass on Bmw 3 Series Gran Turismo: Ordering the Correct Replacement
Fixed quarter window vs vent glass on Bmw 3 Series Gran Turismo: how to identify yours and order the correct replacement for fit, sealing, and safety—read this now.
Quarter Window Replacement for Bmw 3 Series Gran Turismo: Step-by-Step From Cleanup to Drive-Away Time
Quarter window replacement for Bmw 3 Series Gran Turismo: step-by-step from cleanup to install, urethane cure time, and safe drive-away and wash timing guide today.
How Much Does Bmw 3 Series Gran Turismo Quarter Panel Glass Replacement Cost? Insurance Deductibles, Estimates, and Ways to Save
Cost to replace Bmw 3 Series Gran Turismo quarter panel glass: key price factors, OEM vs aftermarket options, insurance deductibles, estimates, and smart ways to save.
OEM-Quality Quarter Glass Replacement for Bmw 3 Series Gran Turismo: Fit, Trim, and Weather-Seal Checklist
OEM-quality quarter glass replacement for Bmw 3 Series Gran Turismo: fit, trim, and weather-seal checklist for correct install, leak prevention, and clean finish.
How Long After Bmw 3 Series Gran Turismo Quarter Panel Glass Replacement Can You Drive or Wash the Car? Urethane Cure-Time Rules
After Bmw 3 Series Gran Turismo quarter panel glass replacement, learn safe drive-away time, when to wash, and urethane cure rules that help prevent leaks and wind noise.
Safety Standards Explained: DOT Markings and FMVSS 205 for Bmw 3 Series Gran Turismo Quarter Glass Replacement
DOT markings and FMVSS 205 explained for Bmw 3 Series Gran Turismo quarter glass replacement—how to verify safety markings and choose compliant OEM-quality glass.
Tint & Privacy Glass Match Guide: Bmw 3 Series Gran Turismo Quarter Glass Replacement Done Right
Tint and privacy match guide for Bmw 3 Series Gran Turismo quarter glass replacement—how to match shade, markings, and fit so the new glass looks factory-perfect.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm