Services
Service Areas
Static vs Dynamic ADAS Calibration for Chevrolet 3500 Extended Cab: What the Difference Means
Static vs Dynamic Calibration on Chevrolet 3500 Extended Cab: Core Differences in Method and Environment
Many Chevrolet 3500 Extended Cab owners think ADAS calibration is a single service, but there are two OEM-defined methods: static and dynamic. Static calibration is done with the vehicle stationary in a controlled area. The technician places manufacturer-approved targets at precise distances and offsets so the forward camera, radar, or other ADAS sensors can relearn their reference point. Dynamic calibration is done during a guided road test, where the Chevrolet 3500 Extended Cab uses lane lines, road edges, road signs, and normal vehicle motion until the module reports calibration complete. In simple terms, static accuracy comes from the setup: level surface, correct lighting, and undisturbed target placement. Dynamic accuracy comes from the drive: clear markings, the required speed window, and enough uninterrupted time without congestion or bad weather. Bang AutoGlass follows the correct OEM procedure for your exact Chevrolet 3500 Extended Cab and coordinates the required calibration after windshield replacement or related repairs. We are mobile, so we can come to your home or workplace, often as soon as next day. Typical windshield replacement takes 30-45 minutes, and we recommend at least one hour of adhesive cure time before normal driving. We accept all insurance companies with comprehensive coverage and back the work with a lifetime workmanship warranty.
Static ADAS Calibration for Chevrolet 3500 Extended Cab: Targets, Measurements, and Shop Setup Requirements
Static calibration for a Chevrolet 3500 Extended Cab is designed to be measurable and repeatable. With the vehicle stationary, the technician follows the OEM routine to recalibrate the forward-facing camera behind the windshield and, on certain configurations, radar or other driver-assistance sensors. Calibration targets (pattern boards, reflectors, or OEM fixtures) are placed using exact distances, heights, and centerline references. Small errors matter, so procedures often require millimeter-level measurements and keeping the target perfectly square to the Chevrolet 3500 Extended Cab. The shop environment is part of the specification. Static calibration typically requires a level surface, steady lighting, and enough clear space so the sensor sees only the intended target. OEM preconditions usually include correct tire pressure, normal ride height, a centered steering wheel, and no uneven cargo load. A diagnostic scan is commonly completed first to confirm there are no active faults, and alignment-related issues may be checked because they can influence camera aim. Bang AutoGlass builds these requirements into scheduling. As a mobile service, we can complete static calibration on-site when conditions meet the OEM standard, or coordinate a controlled bay when required. We provide documentation for insurance claims and back the service with a lifetime workmanship warranty.
Dynamic ADAS Calibration for Chevrolet 3500 Extended Cab: Road Conditions, Speed Windows, and System Learning
Dynamic calibration on a Chevrolet 3500 Extended Cab completes sensor learning in real traffic rather than against shop targets. The technician initiates the OEM routine and the vehicle collects roadway data during a controlled drive. To finish successfully, the Chevrolet 3500 Extended Cab typically needs clear lane markings, predictable road edges, and steady vehicle motion so the camera (and radar, where equipped) can tune how it supports features such as lane keep assist, lane departure warning, adaptive cruise control, and forward collision warning. OEM requirements focus on consistency. Procedures often specify a speed range, a minimum drive time, and limits on weather and visibility. Glare, rain, fog, snow, construction patterns, faded paint, or stop-and-go congestion can interrupt the learning cycle and extend the drive or force a restart. A scan tool is frequently used to monitor status, confirm completion, and verify no diagnostic trouble codes (DTCs) remain. Bang AutoGlass plans routes that match your Chevrolet 3500 Extended Cab requirements and documents results. If your service includes windshield replacement, allow 30-45 minutes for installation plus at least one hour of adhesive cure time before normal driving. We are often available as soon as next day and accept all insurance companies with comprehensive coverage.
When Chevrolet 3500 Extended Cab Needs Both: Why Procedures Are Not Interchangeable and OEM Order Matters
When your Chevrolet 3500 Extended Cab needs both static ADAS calibration and dynamic ADAS calibration (dual calibration), the steps serve different purposes. Static calibration is target-based, setting the baseline for the forward camera and any radar sensors—centerline, pitch/yaw, and sensor aim. Dynamic calibration is the on-road learning drive that confirms the system can interpret lane markings. OEMs may require a specific order (commonly static first, dynamic second) so sensors agree; skipping a required step can leave ADAS out of specification even without warning lights. Dual calibration is commonly required after windshield replacement or camera removal/reinstall, front bumper or radar work, collision repairs affecting sensor brackets, wheel alignment, or suspension and ride-height changes. Small geometry shifts can affect lane keep assist, lane departure warning, adaptive cruise control, and automatic emergency braking. Bang AutoGlass treats calibration as safety-critical. We follow OEM procedures for your Chevrolet 3500 Extended Cab, provide insurance-friendly documentation, and offer mobile service to your home or workplace—often as soon as next day. If a windshield install is included, expect 30–45 minutes plus at least one hour of adhesive cure time before safe driving. We accept comprehensive coverage and back our work with a lifetime workmanship warranty.
How to Confirm the Required Method for Chevrolet 3500 Extended Cab: OEM Procedures, DTCs, and Calibration Triggers
To determine whether your Chevrolet 3500 Extended Cab needs static calibration, dynamic calibration, or dual calibration, start with the manufacturer’s procedure for that exact VIN and trim. ADAS packages can vary within the same model year, and software updates can change when calibrations are required. Treat OEM service information as the source of truth for which sensors must be calibrated and in what order. Next, pair the OEM plan with diagnostics. A professional pre-scan helps identify stored, pending, or history DTCs, “not calibrated” flags, steering angle sensor issues, camera/radar communication problems, or other faults that can stop calibration. Just remember: the absence of a warning light doesn’t prove calibration isn’t required, and some DTCs indicate a separate repair that must be completed first. Common triggers for a Chevrolet 3500 Extended Cab include windshield replacement or camera removal/reinstall, bumper or radar work, collision repairs affecting brackets, wheel alignment, suspension or ride-height changes, module replacement, and certain software updates. Bang AutoGlass verifies the required method using OEM procedures plus pre-scan findings, provides mobile service often as soon as next day, and accepts comprehensive insurance.
Proof It’s Correct: Pre/Post Scans, Calibration Reports, and Final Safety Checks for Chevrolet 3500 Extended Cab
For a Chevrolet 3500 Extended Cab, don’t settle for “it seems fine” after ADAS work. The safest standard is documented proof: a diagnostic pre-scan to record baseline status and any ADAS DTCs, completion of the OEM-required static and/or dynamic calibration routine, and a diagnostic post-scan showing calibration complete with no remaining faults. Many scan platforms can also generate an ADAS calibration report that ties the steps together with vehicle identifiers and timestamps, which supports insurance documentation and customer confidence. A solid report should identify what was calibrated (forward camera, radar), the method used (static, dynamic, or both), and clear completion evidence like scan-tool success results. For static calibration, include target type and setup verification. For dynamic calibration, document that the required speed window and road-marking conditions were met and that the learning cycle completed. Finish with final checks: secure camera bracket and trim, clean sensors, unobstructed camera view, and a controlled road test. Bang AutoGlass provides this level of documentation for your Chevrolet 3500 Extended Cab with mobile service often as soon as next day and a lifetime workmanship warranty.
Services
Service Areas
Static vs Dynamic ADAS Calibration for Chevrolet 3500 Extended Cab: What the Difference Means
Static vs Dynamic Calibration on Chevrolet 3500 Extended Cab: Core Differences in Method and Environment
Many Chevrolet 3500 Extended Cab owners think ADAS calibration is a single service, but there are two OEM-defined methods: static and dynamic. Static calibration is done with the vehicle stationary in a controlled area. The technician places manufacturer-approved targets at precise distances and offsets so the forward camera, radar, or other ADAS sensors can relearn their reference point. Dynamic calibration is done during a guided road test, where the Chevrolet 3500 Extended Cab uses lane lines, road edges, road signs, and normal vehicle motion until the module reports calibration complete. In simple terms, static accuracy comes from the setup: level surface, correct lighting, and undisturbed target placement. Dynamic accuracy comes from the drive: clear markings, the required speed window, and enough uninterrupted time without congestion or bad weather. Bang AutoGlass follows the correct OEM procedure for your exact Chevrolet 3500 Extended Cab and coordinates the required calibration after windshield replacement or related repairs. We are mobile, so we can come to your home or workplace, often as soon as next day. Typical windshield replacement takes 30-45 minutes, and we recommend at least one hour of adhesive cure time before normal driving. We accept all insurance companies with comprehensive coverage and back the work with a lifetime workmanship warranty.
Static ADAS Calibration for Chevrolet 3500 Extended Cab: Targets, Measurements, and Shop Setup Requirements
Static calibration for a Chevrolet 3500 Extended Cab is designed to be measurable and repeatable. With the vehicle stationary, the technician follows the OEM routine to recalibrate the forward-facing camera behind the windshield and, on certain configurations, radar or other driver-assistance sensors. Calibration targets (pattern boards, reflectors, or OEM fixtures) are placed using exact distances, heights, and centerline references. Small errors matter, so procedures often require millimeter-level measurements and keeping the target perfectly square to the Chevrolet 3500 Extended Cab. The shop environment is part of the specification. Static calibration typically requires a level surface, steady lighting, and enough clear space so the sensor sees only the intended target. OEM preconditions usually include correct tire pressure, normal ride height, a centered steering wheel, and no uneven cargo load. A diagnostic scan is commonly completed first to confirm there are no active faults, and alignment-related issues may be checked because they can influence camera aim. Bang AutoGlass builds these requirements into scheduling. As a mobile service, we can complete static calibration on-site when conditions meet the OEM standard, or coordinate a controlled bay when required. We provide documentation for insurance claims and back the service with a lifetime workmanship warranty.
Dynamic ADAS Calibration for Chevrolet 3500 Extended Cab: Road Conditions, Speed Windows, and System Learning
Dynamic calibration on a Chevrolet 3500 Extended Cab completes sensor learning in real traffic rather than against shop targets. The technician initiates the OEM routine and the vehicle collects roadway data during a controlled drive. To finish successfully, the Chevrolet 3500 Extended Cab typically needs clear lane markings, predictable road edges, and steady vehicle motion so the camera (and radar, where equipped) can tune how it supports features such as lane keep assist, lane departure warning, adaptive cruise control, and forward collision warning. OEM requirements focus on consistency. Procedures often specify a speed range, a minimum drive time, and limits on weather and visibility. Glare, rain, fog, snow, construction patterns, faded paint, or stop-and-go congestion can interrupt the learning cycle and extend the drive or force a restart. A scan tool is frequently used to monitor status, confirm completion, and verify no diagnostic trouble codes (DTCs) remain. Bang AutoGlass plans routes that match your Chevrolet 3500 Extended Cab requirements and documents results. If your service includes windshield replacement, allow 30-45 minutes for installation plus at least one hour of adhesive cure time before normal driving. We are often available as soon as next day and accept all insurance companies with comprehensive coverage.
When Chevrolet 3500 Extended Cab Needs Both: Why Procedures Are Not Interchangeable and OEM Order Matters
When your Chevrolet 3500 Extended Cab needs both static ADAS calibration and dynamic ADAS calibration (dual calibration), the steps serve different purposes. Static calibration is target-based, setting the baseline for the forward camera and any radar sensors—centerline, pitch/yaw, and sensor aim. Dynamic calibration is the on-road learning drive that confirms the system can interpret lane markings. OEMs may require a specific order (commonly static first, dynamic second) so sensors agree; skipping a required step can leave ADAS out of specification even without warning lights. Dual calibration is commonly required after windshield replacement or camera removal/reinstall, front bumper or radar work, collision repairs affecting sensor brackets, wheel alignment, or suspension and ride-height changes. Small geometry shifts can affect lane keep assist, lane departure warning, adaptive cruise control, and automatic emergency braking. Bang AutoGlass treats calibration as safety-critical. We follow OEM procedures for your Chevrolet 3500 Extended Cab, provide insurance-friendly documentation, and offer mobile service to your home or workplace—often as soon as next day. If a windshield install is included, expect 30–45 minutes plus at least one hour of adhesive cure time before safe driving. We accept comprehensive coverage and back our work with a lifetime workmanship warranty.
How to Confirm the Required Method for Chevrolet 3500 Extended Cab: OEM Procedures, DTCs, and Calibration Triggers
To determine whether your Chevrolet 3500 Extended Cab needs static calibration, dynamic calibration, or dual calibration, start with the manufacturer’s procedure for that exact VIN and trim. ADAS packages can vary within the same model year, and software updates can change when calibrations are required. Treat OEM service information as the source of truth for which sensors must be calibrated and in what order. Next, pair the OEM plan with diagnostics. A professional pre-scan helps identify stored, pending, or history DTCs, “not calibrated” flags, steering angle sensor issues, camera/radar communication problems, or other faults that can stop calibration. Just remember: the absence of a warning light doesn’t prove calibration isn’t required, and some DTCs indicate a separate repair that must be completed first. Common triggers for a Chevrolet 3500 Extended Cab include windshield replacement or camera removal/reinstall, bumper or radar work, collision repairs affecting brackets, wheel alignment, suspension or ride-height changes, module replacement, and certain software updates. Bang AutoGlass verifies the required method using OEM procedures plus pre-scan findings, provides mobile service often as soon as next day, and accepts comprehensive insurance.
Proof It’s Correct: Pre/Post Scans, Calibration Reports, and Final Safety Checks for Chevrolet 3500 Extended Cab
For a Chevrolet 3500 Extended Cab, don’t settle for “it seems fine” after ADAS work. The safest standard is documented proof: a diagnostic pre-scan to record baseline status and any ADAS DTCs, completion of the OEM-required static and/or dynamic calibration routine, and a diagnostic post-scan showing calibration complete with no remaining faults. Many scan platforms can also generate an ADAS calibration report that ties the steps together with vehicle identifiers and timestamps, which supports insurance documentation and customer confidence. A solid report should identify what was calibrated (forward camera, radar), the method used (static, dynamic, or both), and clear completion evidence like scan-tool success results. For static calibration, include target type and setup verification. For dynamic calibration, document that the required speed window and road-marking conditions were met and that the learning cycle completed. Finish with final checks: secure camera bracket and trim, clean sensors, unobstructed camera view, and a controlled road test. Bang AutoGlass provides this level of documentation for your Chevrolet 3500 Extended Cab with mobile service often as soon as next day and a lifetime workmanship warranty.
Services
Service Areas
Static vs Dynamic ADAS Calibration for Chevrolet 3500 Extended Cab: What the Difference Means
Static vs Dynamic Calibration on Chevrolet 3500 Extended Cab: Core Differences in Method and Environment
Many Chevrolet 3500 Extended Cab owners think ADAS calibration is a single service, but there are two OEM-defined methods: static and dynamic. Static calibration is done with the vehicle stationary in a controlled area. The technician places manufacturer-approved targets at precise distances and offsets so the forward camera, radar, or other ADAS sensors can relearn their reference point. Dynamic calibration is done during a guided road test, where the Chevrolet 3500 Extended Cab uses lane lines, road edges, road signs, and normal vehicle motion until the module reports calibration complete. In simple terms, static accuracy comes from the setup: level surface, correct lighting, and undisturbed target placement. Dynamic accuracy comes from the drive: clear markings, the required speed window, and enough uninterrupted time without congestion or bad weather. Bang AutoGlass follows the correct OEM procedure for your exact Chevrolet 3500 Extended Cab and coordinates the required calibration after windshield replacement or related repairs. We are mobile, so we can come to your home or workplace, often as soon as next day. Typical windshield replacement takes 30-45 minutes, and we recommend at least one hour of adhesive cure time before normal driving. We accept all insurance companies with comprehensive coverage and back the work with a lifetime workmanship warranty.
Static ADAS Calibration for Chevrolet 3500 Extended Cab: Targets, Measurements, and Shop Setup Requirements
Static calibration for a Chevrolet 3500 Extended Cab is designed to be measurable and repeatable. With the vehicle stationary, the technician follows the OEM routine to recalibrate the forward-facing camera behind the windshield and, on certain configurations, radar or other driver-assistance sensors. Calibration targets (pattern boards, reflectors, or OEM fixtures) are placed using exact distances, heights, and centerline references. Small errors matter, so procedures often require millimeter-level measurements and keeping the target perfectly square to the Chevrolet 3500 Extended Cab. The shop environment is part of the specification. Static calibration typically requires a level surface, steady lighting, and enough clear space so the sensor sees only the intended target. OEM preconditions usually include correct tire pressure, normal ride height, a centered steering wheel, and no uneven cargo load. A diagnostic scan is commonly completed first to confirm there are no active faults, and alignment-related issues may be checked because they can influence camera aim. Bang AutoGlass builds these requirements into scheduling. As a mobile service, we can complete static calibration on-site when conditions meet the OEM standard, or coordinate a controlled bay when required. We provide documentation for insurance claims and back the service with a lifetime workmanship warranty.
Dynamic ADAS Calibration for Chevrolet 3500 Extended Cab: Road Conditions, Speed Windows, and System Learning
Dynamic calibration on a Chevrolet 3500 Extended Cab completes sensor learning in real traffic rather than against shop targets. The technician initiates the OEM routine and the vehicle collects roadway data during a controlled drive. To finish successfully, the Chevrolet 3500 Extended Cab typically needs clear lane markings, predictable road edges, and steady vehicle motion so the camera (and radar, where equipped) can tune how it supports features such as lane keep assist, lane departure warning, adaptive cruise control, and forward collision warning. OEM requirements focus on consistency. Procedures often specify a speed range, a minimum drive time, and limits on weather and visibility. Glare, rain, fog, snow, construction patterns, faded paint, or stop-and-go congestion can interrupt the learning cycle and extend the drive or force a restart. A scan tool is frequently used to monitor status, confirm completion, and verify no diagnostic trouble codes (DTCs) remain. Bang AutoGlass plans routes that match your Chevrolet 3500 Extended Cab requirements and documents results. If your service includes windshield replacement, allow 30-45 minutes for installation plus at least one hour of adhesive cure time before normal driving. We are often available as soon as next day and accept all insurance companies with comprehensive coverage.
When Chevrolet 3500 Extended Cab Needs Both: Why Procedures Are Not Interchangeable and OEM Order Matters
When your Chevrolet 3500 Extended Cab needs both static ADAS calibration and dynamic ADAS calibration (dual calibration), the steps serve different purposes. Static calibration is target-based, setting the baseline for the forward camera and any radar sensors—centerline, pitch/yaw, and sensor aim. Dynamic calibration is the on-road learning drive that confirms the system can interpret lane markings. OEMs may require a specific order (commonly static first, dynamic second) so sensors agree; skipping a required step can leave ADAS out of specification even without warning lights. Dual calibration is commonly required after windshield replacement or camera removal/reinstall, front bumper or radar work, collision repairs affecting sensor brackets, wheel alignment, or suspension and ride-height changes. Small geometry shifts can affect lane keep assist, lane departure warning, adaptive cruise control, and automatic emergency braking. Bang AutoGlass treats calibration as safety-critical. We follow OEM procedures for your Chevrolet 3500 Extended Cab, provide insurance-friendly documentation, and offer mobile service to your home or workplace—often as soon as next day. If a windshield install is included, expect 30–45 minutes plus at least one hour of adhesive cure time before safe driving. We accept comprehensive coverage and back our work with a lifetime workmanship warranty.
How to Confirm the Required Method for Chevrolet 3500 Extended Cab: OEM Procedures, DTCs, and Calibration Triggers
To determine whether your Chevrolet 3500 Extended Cab needs static calibration, dynamic calibration, or dual calibration, start with the manufacturer’s procedure for that exact VIN and trim. ADAS packages can vary within the same model year, and software updates can change when calibrations are required. Treat OEM service information as the source of truth for which sensors must be calibrated and in what order. Next, pair the OEM plan with diagnostics. A professional pre-scan helps identify stored, pending, or history DTCs, “not calibrated” flags, steering angle sensor issues, camera/radar communication problems, or other faults that can stop calibration. Just remember: the absence of a warning light doesn’t prove calibration isn’t required, and some DTCs indicate a separate repair that must be completed first. Common triggers for a Chevrolet 3500 Extended Cab include windshield replacement or camera removal/reinstall, bumper or radar work, collision repairs affecting brackets, wheel alignment, suspension or ride-height changes, module replacement, and certain software updates. Bang AutoGlass verifies the required method using OEM procedures plus pre-scan findings, provides mobile service often as soon as next day, and accepts comprehensive insurance.
Proof It’s Correct: Pre/Post Scans, Calibration Reports, and Final Safety Checks for Chevrolet 3500 Extended Cab
For a Chevrolet 3500 Extended Cab, don’t settle for “it seems fine” after ADAS work. The safest standard is documented proof: a diagnostic pre-scan to record baseline status and any ADAS DTCs, completion of the OEM-required static and/or dynamic calibration routine, and a diagnostic post-scan showing calibration complete with no remaining faults. Many scan platforms can also generate an ADAS calibration report that ties the steps together with vehicle identifiers and timestamps, which supports insurance documentation and customer confidence. A solid report should identify what was calibrated (forward camera, radar), the method used (static, dynamic, or both), and clear completion evidence like scan-tool success results. For static calibration, include target type and setup verification. For dynamic calibration, document that the required speed window and road-marking conditions were met and that the learning cycle completed. Finish with final checks: secure camera bracket and trim, clean sensors, unobstructed camera view, and a controlled road test. Bang AutoGlass provides this level of documentation for your Chevrolet 3500 Extended Cab with mobile service often as soon as next day and a lifetime workmanship warranty.
Enjoy More Relevant Blogs
How Much Does ADAS Calibration Cost for Chevrolet 3500 Extended Cab? What Drives Pricing and What Insurance Typically Covers
How much does ADAS calibration cost for a Chevrolet 3500 Extended Cab? Learn pricing drivers, camera vs radar needs, labor time, and what insurance typically covers.
Do You Need ADAS Calibration for Chevrolet 3500 Extended Cab After a Wheel Alignment, Suspension Work, or a Minor Collision?
Do you need ADAS calibration for a Chevrolet 3500 Extended Cab after alignment, suspension work, or a minor collision? Signs, timelines, safety risks, and costs today.
How to Schedule ADAS Calibration for Chevrolet 3500 Extended Cab After Windshield Replacement
Schedule ADAS calibration for Chevrolet 3500 Extended Cab after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
Camera Calibration for Chevrolet 3500 Extended Cab: Lane Assist and Forward Collision Accuracy Explained
Need camera calibration for your Chevrolet 3500 Extended Cab? See how calibration affects lane assist and forward collision accuracy after windshield service or repairs.
OEM Calibration Requirements for Chevrolet 3500 Extended Cab: How to Confirm What Must Be Calibrated
OEM calibration requirements for Chevrolet 3500 Extended Cab: how to confirm what must be calibrated after repairs, what triggers recalibration, and what proof to ask for.
ADAS Calibration Checklist for Chevrolet 3500 Extended Cab: Documentation, Verification, and Final Safety Checks
ADAS calibration checklist for Chevrolet 3500 Extended Cab: documentation to request, scans to verify, and safety checks that confirm cameras and sensors are set right.
Pre- and Post-Calibration Scans for Chevrolet 3500 Extended Cab: Proving Systems Are Set Correctly
Pre- and post-calibration scans for Chevrolet 3500 Extended Cab: see why scans matter, what they verify, and how reports prove ADAS systems are set correctly after service.
Mobile ADAS Calibration for Chevrolet 3500 Extended Cab: What to Expect On-Site and Why Setup Matters
Mobile ADAS calibration for Chevrolet 3500 Extended Cab: what to expect on-site, space and lighting needs, and why setup and verification matter after repairs today.
ADAS Warning Lights on Chevrolet 3500 Extended Cab: When Calibration Is the Fix and When It’s Not
ADAS warning lights on your Chevrolet 3500 Extended Cab? Learn when calibration fixes lane assist or AEB issues, when it will not, and what to check next. Schedule help.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm