Services
Service Areas
How Long Does Rear Glass Replacement Take on Chevrolet Sportvan G10? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Chevrolet Sportvan G10 Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
If you’re wondering how long a Chevrolet Sportvan G10 rear glass replacement takes, separate scheduling from install time. Many shops can handle the hands-on work in about 1–3 hours, but the total timeline can expand if the correct back glass must be sourced, the appointment is booked out, or the vehicle has to sit after installation for adhesive set time. The replacement itself is a step-by-step process: remove the damaged rear windshield/back glass, clear broken glass and old materials, prep the bonding surface, then set and align the new rear window in fresh urethane with final cleanup. Bang AutoGlass shortens downtime with mobile auto glass service at your home or office. For most Chevrolet Sportvan G10 back glass jobs, our on-site removal, prep, install, and cleanup typically takes about 30–45 minutes once we begin. After the glass is set, we require at least 1 hour of stationary time before it’s safe to drive so the urethane reaches a conservative initial bond. Most customers plan a 90–120 minute window from technician arrival to safe drive-away. If you’re using insurance, rear window replacement is usually covered under comprehensive coverage, and we work with any carrier that offers it. Every replacement includes a lifetime workmanship warranty for long-term confidence.
Chevrolet Sportvan G10 Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
The install time for a Chevrolet Sportvan G10 rear window replacement depends on completing each step efficiently without cutting corners. We start by protecting interior surfaces, removing trim and moldings, and disconnecting anything tied to the back glass, such as defroster tabs or an integrated antenna lead. If the rear window shattered, loose fragments are removed and the parcel shelf, cargo area, and vents are vacuumed so glass chips don’t linger. Next is surface preparation on the pinch weld: old urethane is cut back, the area is cleaned and decontaminated, and any rust is addressed so the new adhesive bonds consistently. Depending on the adhesive system, primer or activator is applied to promote adhesion and help prevent corrosion. Fresh automotive urethane is then laid in a continuous bead, and the new rear windshield/back glass is set with precise alignment so the perimeter seats evenly and the hatch or trunk closes correctly. We finish by reinstalling moldings, verifying defroster connector alignment, applying retention tape if needed, and performing a quick inspection to catch gaps that can lead to wind noise or leaks. At Bang AutoGlass, this workflow typically takes about 30–45 minutes of hands-on work for most Chevrolet Sportvan G10 back glass replacements, followed by the required stationary set time before driving.
Urethane Cure Time for Chevrolet Sportvan G10 Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
Urethane set and cure time is why a Chevrolet Sportvan G10 back glass replacement isn’t “done” the moment the new rear window looks aligned. Rear glass is bonded with structural automotive urethane that must reach a safety threshold before the vehicle is driven. You may hear two terms: SDAT (Safe Drive-Away Time) and MDAT (Minimum Drive-Away Time). Both describe the minimum stationary time required after installation so the adhesive achieves safe early retention. Hitting SDAT/MDAT does not mean the urethane is fully cured; it continues gaining strength for hours as the chemistry finishes. Drive-away time varies by adhesive brand and formula, and by conditions such as temperature and humidity—cold or very dry air can slow curing, while certain fast-cure systems can shorten the window under ideal conditions. A professional installer should follow the urethane manufacturer’s product data sheet for the specific product used and provide a clear recommendation for your vehicle and environment. For customer planning, Bang AutoGlass uses a straightforward, conservative baseline for Chevrolet Sportvan G10 rear glass replacement: keep the vehicle parked for at least 1 hour before it’s safe to drive. This helps protect the fresh bond, supports proper sealing, and reduces the risk of movement that can cause leaks or wind noise.
What Affects Chevrolet Sportvan G10 Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
On a Chevrolet Sportvan G10, rear windshield cure time is driven by the urethane system and the conditions on the day of service—not the vehicle badge alone. Urethane curing is chemistry, so temperature and humidity can materially change how quickly it reaches MDAT/SDAT. Cool, low-humidity weather usually slows strength build because moisture-cure adhesives need ambient moisture. In contrast, moderate warmth often speeds curing, while extreme heat can shorten working time and make the bead skin over faster, leaving less time to position the Chevrolet Sportvan G10 back glass accurately. Adhesive choice is therefore critical: fast-cure formulations are engineered to reach drive-away targets sooner in specific ranges, while standard urethanes may require more stationary time; specialty products may be used in very cold climates. Glass size and geometry also matter. A large rear window on a crossover, SUV, or hatchback increases bead length and leverage, so consistent bead height, proper primers, and thorough pinch-weld preparation are essential for an even seal. Rust, contamination, or uneven old urethane can compromise adhesion and durability. Bang AutoGlass accounts for these variables on your Chevrolet Sportvan G10, then gives you a straightforward drive-away recommendation based on the adhesive and real conditions.
When Is It Safe to Drive After Chevrolet Sportvan G10 Rear Glass Replacement? Practical Drive-Away Rules
When can you drive after a Chevrolet Sportvan G10 rear glass replacement? The correct benchmark is MDAT/SDAT—the minimum stationary time the urethane needs to develop enough initial strength for normal driving forces. Because MDAT depends on the exact adhesive and the temperature/humidity at install, a reliable shop follows the urethane manufacturer’s data sheet rather than a generic promise. Some fast-cure systems can reach drive-away strength sooner in ideal conditions, while cold or low-humidity days often extend the wait; extreme heat can also change working time and cure behavior. For planning, protect the most vulnerable window: Bang AutoGlass requires at least 1 hour with your Chevrolet Sportvan G10 parked after the back glass is set before it is safe to drive. During that hour, keep it stationary—no repositioning, no quick errands. After you’re cleared, drive gently the rest of the day: close doors softly, avoid rough roads when possible, and postpone high-speed or aggressive driving while the bond continues to strengthen. If you’re using insurance, rear window replacement is typically handled under comprehensive coverage, and every install is backed by our lifetime workmanship warranty.
Chevrolet Sportvan G10 Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
After a Chevrolet Sportvan G10 rear glass replacement, good aftercare protects the fresh urethane bond while it continues curing. First, follow the drive-away time you’re given; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is applied, leave it in place—its job is to stabilize the back glass and keep moldings aligned while the urethane sets. A common guideline is about 24 hours (sometimes up to 48 hours) before removing tape. For the first 24–48 hours, avoid automated car washes, pressure washing, or directing high-pressure water at the window perimeter, since force and chemicals can disturb an immature seal. Use gentle habits early on: close doors and the liftgate softly to reduce cabin-pressure spikes, and avoid rough construction roads that twist the body and load the new glass. After your first drive or first rain, do a quick leak/wind-noise check around trim and the cargo area, and call promptly if anything seems off. Finally, protect the rear defroster grid—clean inside glass with a soft microfiber cloth and mild cleaner, avoiding razors or abrasive pads.
Services
Service Areas
How Long Does Rear Glass Replacement Take on Chevrolet Sportvan G10? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Chevrolet Sportvan G10 Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
If you’re wondering how long a Chevrolet Sportvan G10 rear glass replacement takes, separate scheduling from install time. Many shops can handle the hands-on work in about 1–3 hours, but the total timeline can expand if the correct back glass must be sourced, the appointment is booked out, or the vehicle has to sit after installation for adhesive set time. The replacement itself is a step-by-step process: remove the damaged rear windshield/back glass, clear broken glass and old materials, prep the bonding surface, then set and align the new rear window in fresh urethane with final cleanup. Bang AutoGlass shortens downtime with mobile auto glass service at your home or office. For most Chevrolet Sportvan G10 back glass jobs, our on-site removal, prep, install, and cleanup typically takes about 30–45 minutes once we begin. After the glass is set, we require at least 1 hour of stationary time before it’s safe to drive so the urethane reaches a conservative initial bond. Most customers plan a 90–120 minute window from technician arrival to safe drive-away. If you’re using insurance, rear window replacement is usually covered under comprehensive coverage, and we work with any carrier that offers it. Every replacement includes a lifetime workmanship warranty for long-term confidence.
Chevrolet Sportvan G10 Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
The install time for a Chevrolet Sportvan G10 rear window replacement depends on completing each step efficiently without cutting corners. We start by protecting interior surfaces, removing trim and moldings, and disconnecting anything tied to the back glass, such as defroster tabs or an integrated antenna lead. If the rear window shattered, loose fragments are removed and the parcel shelf, cargo area, and vents are vacuumed so glass chips don’t linger. Next is surface preparation on the pinch weld: old urethane is cut back, the area is cleaned and decontaminated, and any rust is addressed so the new adhesive bonds consistently. Depending on the adhesive system, primer or activator is applied to promote adhesion and help prevent corrosion. Fresh automotive urethane is then laid in a continuous bead, and the new rear windshield/back glass is set with precise alignment so the perimeter seats evenly and the hatch or trunk closes correctly. We finish by reinstalling moldings, verifying defroster connector alignment, applying retention tape if needed, and performing a quick inspection to catch gaps that can lead to wind noise or leaks. At Bang AutoGlass, this workflow typically takes about 30–45 minutes of hands-on work for most Chevrolet Sportvan G10 back glass replacements, followed by the required stationary set time before driving.
Urethane Cure Time for Chevrolet Sportvan G10 Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
Urethane set and cure time is why a Chevrolet Sportvan G10 back glass replacement isn’t “done” the moment the new rear window looks aligned. Rear glass is bonded with structural automotive urethane that must reach a safety threshold before the vehicle is driven. You may hear two terms: SDAT (Safe Drive-Away Time) and MDAT (Minimum Drive-Away Time). Both describe the minimum stationary time required after installation so the adhesive achieves safe early retention. Hitting SDAT/MDAT does not mean the urethane is fully cured; it continues gaining strength for hours as the chemistry finishes. Drive-away time varies by adhesive brand and formula, and by conditions such as temperature and humidity—cold or very dry air can slow curing, while certain fast-cure systems can shorten the window under ideal conditions. A professional installer should follow the urethane manufacturer’s product data sheet for the specific product used and provide a clear recommendation for your vehicle and environment. For customer planning, Bang AutoGlass uses a straightforward, conservative baseline for Chevrolet Sportvan G10 rear glass replacement: keep the vehicle parked for at least 1 hour before it’s safe to drive. This helps protect the fresh bond, supports proper sealing, and reduces the risk of movement that can cause leaks or wind noise.
What Affects Chevrolet Sportvan G10 Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
On a Chevrolet Sportvan G10, rear windshield cure time is driven by the urethane system and the conditions on the day of service—not the vehicle badge alone. Urethane curing is chemistry, so temperature and humidity can materially change how quickly it reaches MDAT/SDAT. Cool, low-humidity weather usually slows strength build because moisture-cure adhesives need ambient moisture. In contrast, moderate warmth often speeds curing, while extreme heat can shorten working time and make the bead skin over faster, leaving less time to position the Chevrolet Sportvan G10 back glass accurately. Adhesive choice is therefore critical: fast-cure formulations are engineered to reach drive-away targets sooner in specific ranges, while standard urethanes may require more stationary time; specialty products may be used in very cold climates. Glass size and geometry also matter. A large rear window on a crossover, SUV, or hatchback increases bead length and leverage, so consistent bead height, proper primers, and thorough pinch-weld preparation are essential for an even seal. Rust, contamination, or uneven old urethane can compromise adhesion and durability. Bang AutoGlass accounts for these variables on your Chevrolet Sportvan G10, then gives you a straightforward drive-away recommendation based on the adhesive and real conditions.
When Is It Safe to Drive After Chevrolet Sportvan G10 Rear Glass Replacement? Practical Drive-Away Rules
When can you drive after a Chevrolet Sportvan G10 rear glass replacement? The correct benchmark is MDAT/SDAT—the minimum stationary time the urethane needs to develop enough initial strength for normal driving forces. Because MDAT depends on the exact adhesive and the temperature/humidity at install, a reliable shop follows the urethane manufacturer’s data sheet rather than a generic promise. Some fast-cure systems can reach drive-away strength sooner in ideal conditions, while cold or low-humidity days often extend the wait; extreme heat can also change working time and cure behavior. For planning, protect the most vulnerable window: Bang AutoGlass requires at least 1 hour with your Chevrolet Sportvan G10 parked after the back glass is set before it is safe to drive. During that hour, keep it stationary—no repositioning, no quick errands. After you’re cleared, drive gently the rest of the day: close doors softly, avoid rough roads when possible, and postpone high-speed or aggressive driving while the bond continues to strengthen. If you’re using insurance, rear window replacement is typically handled under comprehensive coverage, and every install is backed by our lifetime workmanship warranty.
Chevrolet Sportvan G10 Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
After a Chevrolet Sportvan G10 rear glass replacement, good aftercare protects the fresh urethane bond while it continues curing. First, follow the drive-away time you’re given; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is applied, leave it in place—its job is to stabilize the back glass and keep moldings aligned while the urethane sets. A common guideline is about 24 hours (sometimes up to 48 hours) before removing tape. For the first 24–48 hours, avoid automated car washes, pressure washing, or directing high-pressure water at the window perimeter, since force and chemicals can disturb an immature seal. Use gentle habits early on: close doors and the liftgate softly to reduce cabin-pressure spikes, and avoid rough construction roads that twist the body and load the new glass. After your first drive or first rain, do a quick leak/wind-noise check around trim and the cargo area, and call promptly if anything seems off. Finally, protect the rear defroster grid—clean inside glass with a soft microfiber cloth and mild cleaner, avoiding razors or abrasive pads.
Services
Service Areas
How Long Does Rear Glass Replacement Take on Chevrolet Sportvan G10? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Chevrolet Sportvan G10 Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
If you’re wondering how long a Chevrolet Sportvan G10 rear glass replacement takes, separate scheduling from install time. Many shops can handle the hands-on work in about 1–3 hours, but the total timeline can expand if the correct back glass must be sourced, the appointment is booked out, or the vehicle has to sit after installation for adhesive set time. The replacement itself is a step-by-step process: remove the damaged rear windshield/back glass, clear broken glass and old materials, prep the bonding surface, then set and align the new rear window in fresh urethane with final cleanup. Bang AutoGlass shortens downtime with mobile auto glass service at your home or office. For most Chevrolet Sportvan G10 back glass jobs, our on-site removal, prep, install, and cleanup typically takes about 30–45 minutes once we begin. After the glass is set, we require at least 1 hour of stationary time before it’s safe to drive so the urethane reaches a conservative initial bond. Most customers plan a 90–120 minute window from technician arrival to safe drive-away. If you’re using insurance, rear window replacement is usually covered under comprehensive coverage, and we work with any carrier that offers it. Every replacement includes a lifetime workmanship warranty for long-term confidence.
Chevrolet Sportvan G10 Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
The install time for a Chevrolet Sportvan G10 rear window replacement depends on completing each step efficiently without cutting corners. We start by protecting interior surfaces, removing trim and moldings, and disconnecting anything tied to the back glass, such as defroster tabs or an integrated antenna lead. If the rear window shattered, loose fragments are removed and the parcel shelf, cargo area, and vents are vacuumed so glass chips don’t linger. Next is surface preparation on the pinch weld: old urethane is cut back, the area is cleaned and decontaminated, and any rust is addressed so the new adhesive bonds consistently. Depending on the adhesive system, primer or activator is applied to promote adhesion and help prevent corrosion. Fresh automotive urethane is then laid in a continuous bead, and the new rear windshield/back glass is set with precise alignment so the perimeter seats evenly and the hatch or trunk closes correctly. We finish by reinstalling moldings, verifying defroster connector alignment, applying retention tape if needed, and performing a quick inspection to catch gaps that can lead to wind noise or leaks. At Bang AutoGlass, this workflow typically takes about 30–45 minutes of hands-on work for most Chevrolet Sportvan G10 back glass replacements, followed by the required stationary set time before driving.
Urethane Cure Time for Chevrolet Sportvan G10 Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
Urethane set and cure time is why a Chevrolet Sportvan G10 back glass replacement isn’t “done” the moment the new rear window looks aligned. Rear glass is bonded with structural automotive urethane that must reach a safety threshold before the vehicle is driven. You may hear two terms: SDAT (Safe Drive-Away Time) and MDAT (Minimum Drive-Away Time). Both describe the minimum stationary time required after installation so the adhesive achieves safe early retention. Hitting SDAT/MDAT does not mean the urethane is fully cured; it continues gaining strength for hours as the chemistry finishes. Drive-away time varies by adhesive brand and formula, and by conditions such as temperature and humidity—cold or very dry air can slow curing, while certain fast-cure systems can shorten the window under ideal conditions. A professional installer should follow the urethane manufacturer’s product data sheet for the specific product used and provide a clear recommendation for your vehicle and environment. For customer planning, Bang AutoGlass uses a straightforward, conservative baseline for Chevrolet Sportvan G10 rear glass replacement: keep the vehicle parked for at least 1 hour before it’s safe to drive. This helps protect the fresh bond, supports proper sealing, and reduces the risk of movement that can cause leaks or wind noise.
What Affects Chevrolet Sportvan G10 Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
On a Chevrolet Sportvan G10, rear windshield cure time is driven by the urethane system and the conditions on the day of service—not the vehicle badge alone. Urethane curing is chemistry, so temperature and humidity can materially change how quickly it reaches MDAT/SDAT. Cool, low-humidity weather usually slows strength build because moisture-cure adhesives need ambient moisture. In contrast, moderate warmth often speeds curing, while extreme heat can shorten working time and make the bead skin over faster, leaving less time to position the Chevrolet Sportvan G10 back glass accurately. Adhesive choice is therefore critical: fast-cure formulations are engineered to reach drive-away targets sooner in specific ranges, while standard urethanes may require more stationary time; specialty products may be used in very cold climates. Glass size and geometry also matter. A large rear window on a crossover, SUV, or hatchback increases bead length and leverage, so consistent bead height, proper primers, and thorough pinch-weld preparation are essential for an even seal. Rust, contamination, or uneven old urethane can compromise adhesion and durability. Bang AutoGlass accounts for these variables on your Chevrolet Sportvan G10, then gives you a straightforward drive-away recommendation based on the adhesive and real conditions.
When Is It Safe to Drive After Chevrolet Sportvan G10 Rear Glass Replacement? Practical Drive-Away Rules
When can you drive after a Chevrolet Sportvan G10 rear glass replacement? The correct benchmark is MDAT/SDAT—the minimum stationary time the urethane needs to develop enough initial strength for normal driving forces. Because MDAT depends on the exact adhesive and the temperature/humidity at install, a reliable shop follows the urethane manufacturer’s data sheet rather than a generic promise. Some fast-cure systems can reach drive-away strength sooner in ideal conditions, while cold or low-humidity days often extend the wait; extreme heat can also change working time and cure behavior. For planning, protect the most vulnerable window: Bang AutoGlass requires at least 1 hour with your Chevrolet Sportvan G10 parked after the back glass is set before it is safe to drive. During that hour, keep it stationary—no repositioning, no quick errands. After you’re cleared, drive gently the rest of the day: close doors softly, avoid rough roads when possible, and postpone high-speed or aggressive driving while the bond continues to strengthen. If you’re using insurance, rear window replacement is typically handled under comprehensive coverage, and every install is backed by our lifetime workmanship warranty.
Chevrolet Sportvan G10 Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
After a Chevrolet Sportvan G10 rear glass replacement, good aftercare protects the fresh urethane bond while it continues curing. First, follow the drive-away time you’re given; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is applied, leave it in place—its job is to stabilize the back glass and keep moldings aligned while the urethane sets. A common guideline is about 24 hours (sometimes up to 48 hours) before removing tape. For the first 24–48 hours, avoid automated car washes, pressure washing, or directing high-pressure water at the window perimeter, since force and chemicals can disturb an immature seal. Use gentle habits early on: close doors and the liftgate softly to reduce cabin-pressure spikes, and avoid rough construction roads that twist the body and load the new glass. After your first drive or first rain, do a quick leak/wind-noise check around trim and the cargo area, and call promptly if anything seems off. Finally, protect the rear defroster grid—clean inside glass with a soft microfiber cloth and mild cleaner, avoiding razors or abrasive pads.
Enjoy More Relevant Blogs
Post-Install Checks for Chevrolet Sportvan G10: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Chevrolet Sportvan G10: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
OEM-Quality Rear Glass Replacement for Chevrolet Sportvan G10: Defroster Grid and Tint-Match Checklist
OEM-quality rear glass replacement for Chevrolet Sportvan G10: defroster grid and tint-match checklist, plus install tips to avoid callbacks—schedule service.
Rear Glass Replacement for Chevrolet Sportvan G10: What to Expect During Install and Aftercare
Rear glass replacement for Chevrolet Sportvan G10: what happens during install, defroster and tint considerations, cure time, and aftercare to prevent leaks long-term.
Tempered Safety Rear Glass Replacement for Chevrolet Sportvan G10: Understanding DOT Markings and FMVSS 205
Need Chevrolet Sportvan G10 rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
How Much Does Rear Glass Replacement Cost for Chevrolet Sportvan G10? Pricing Factors, OEM vs Aftermarket, and Insurance Deductibles
Estimate Chevrolet Sportvan G10 rear glass replacement cost. Compare OEM vs aftermarket, labor factors, insurance deductibles, and ways to save. Request a quote.
How to Schedule Mobile Rear Glass Replacement for Chevrolet Sportvan G10
Schedule mobile rear glass replacement for your Chevrolet Sportvan G10 in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Back Glass Replacement on Chevrolet Sportvan G10: Defroster Tabs, Antenna Lines, and Connector Reattachment Basics
Back glass replacement on Chevrolet Sportvan G10: defroster tabs, antenna lines, and connectors explained, plus install tips to avoid damage and rework safely.
Rear Defroster Not Working on Chevrolet Sportvan G10? When Rear Glass Replacement Makes More Sense Than Repair
Rear defroster not working on your Chevrolet Sportvan G10? Learn common causes, when repair fails, and when rear glass replacement is the smarter fix for winter.
Shattered Back Window on Chevrolet Sportvan G10: A Step-by-Step Rear Glass Replacement Plan
Shattered back window on Chevrolet Sportvan G10? Follow a step-by-step rear glass replacement plan, cleanup tips, defroster notes, cure time, and drive-away rules.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm