Services
Service Areas
ADAS After Windshield Replacement on Ford Transit Connect Passenger: Calibration Basics and Safety Checks
Why ADAS Calibration Matters After Windshield Replacement on Ford Transit Connect Passenger
On many late-model Ford Transit Connect Passenger vehicles, the windshield is integrated into the ADAS system. The forward-facing camera views a defined camera zone, and the mount is engineered around OEM tolerances for glass position, bracket geometry, and urethane bead height. After windshield replacement, subtle changes in seating, bracket alignment, adhesive height, or windshield optics can shift the camera perspective enough to affect how it interprets lane markings and objects ahead. The risk can be subtle: features may turn on, but timing and positioning can be off, creating nuisance warnings, lane centering that hunts, adaptive cruise control distance errors, or automatic emergency braking that reacts late. Bang AutoGlass keeps the process straightforward. We offer mobile windshield replacement as soon as next day; most installations take 30 to 45 minutes, followed by at least one hour of safe-drive time for adhesive cure. If your Ford Transit Connect Passenger uses a windshield-mounted camera, we review calibration requirements up front, help coordinate the correct ADAS calibration approach, and provide documentation for you and your insurer. We accept all insurance companies with comprehensive coverage and back our work with a lifetime workmanship warranty.
Which Ford Transit Connect Passenger Systems Can Be Affected: Camera-Based ADAS Features and Safety Functions
When customers ask which Ford Transit Connect Passenger systems can be affected by windshield replacement, we focus on camera-based ADAS because a single forward-facing camera can support multiple features. Common camera-driven functions include lane departure warning, lane keeping assist, lane centering, forward collision warning, automatic emergency braking, following distance monitoring, traffic sign recognition, and automatic high beams. Depending on year and trim, the same module may also support pedestrian or cyclist detection and collision avoidance steering support. Even when radar or ultrasonic sensors are present, many vehicles use sensor fusion, blending inputs, so the camera still helps confirm lanes and classify objects ahead. Because ADAS equipment varies by model year and trim, technicians should verify configuration by VIN, scan for related fault codes, and follow the OEM calibration requirement for the exact repair operation. At Bang AutoGlass, we confirm what ADAS features your Ford Transit Connect Passenger is equipped with, inspect the camera mount and trim during replacement, and help coordinate any required windshield camera calibration so safety functions return to factory-level performance. We also review post-install warning indicators, advise on safe-drive time, and keep calibration records with the repair file for easier claims handling.
Static vs Dynamic ADAS Calibration for Ford Transit Connect Passenger: When Each Method Applies
Static versus dynamic ADAS calibration describes how the Ford Transit Connect Passenger windshield camera is returned to OEM specifications after new glass is installed. Static calibration is performed in a controlled environment using OEM targets, precise measurements, and a diagnostic scan tool. The setup must meet specification, including a level surface, correct target distance and height, centered steering wheel, proper tire pressure, correct ride height, and stable lighting. Dynamic calibration is completed through a prescribed drive cycle, with scan equipment connected while the Ford Transit Connect Passenger is driven on clearly marked roads within the required speed range and time window. Weather, visibility, and lane quality matter because the camera needs consistent cues to learn lanes and reference points. Some vehicles require one method, some require both, and others need additional initialization or fault clearing, so guessing is risky. After calibration, a final scan and basic road test help confirm the system is free of related codes and operating normally. Bang AutoGlass completes mobile windshield replacement in about 30 to 45 minutes, requires at least one hour of safe-drive time for urethane cure, and then helps coordinate the correct calibration with verification documentation when available.
Pre-Calibration Requirements: Pre-Scan, DTC Review, and Vehicle Setup Checks
Before any ADAS calibration on a Ford Transit Connect Passenger, the setup drives the outcome. We start with a pre-repair diagnostic scan (pre-scan) to document baseline condition, capture active/stored/pending diagnostic trouble codes (DTCs), and flag issues that can block calibration even when no warning light is on. After replacement, we confirm the vehicle is in an OEM-ready state and that any pre-existing faults are identified before calibration begins. OEM checks then focus on vehicle stance and visibility. The Ford Transit Connect Passenger should be at correct ride height with proper tire pressure, matching tire sizes, and no alignment, steering, or suspension concerns that could change camera aim. Excess cargo and uneven loading can shift attitude, so we keep the cabin and trunk clear. We also inspect the camera mount/bracket, verify the correct windshield type, and ensure the camera viewing zone is clean and distortion-free. Static calibration requires a level surface and precise target placement; dynamic calibration requires safe roads with clear lane markings. Bang AutoGlass provides mobile windshield replacement at home or work, often next day. Most installs take 30 to 45 minutes, and we require at least one hour of safe-drive time for adhesive cure before any road procedure or calibration drive.
Post-Calibration Safety Checks: Post-Scan Verification, Test Drive, and Documentation
After ADAS calibration on your Ford Transit Connect Passenger following windshield replacement, the work is only complete once results are verified. Post-calibration checks begin with a post-repair scan (post-scan) to confirm the routine finished successfully, required modules report a calibrated status, and no diagnostic trouble codes (DTCs) remain in the forward camera, radar (if equipped), steering, or ABS/ESC systems. If any codes return, the underlying issue should be corrected before relying on camera-based safety features. We then perform functional and fit checks. The camera area must be clean and unobstructed, interior trim and the camera housing must be seated securely, and wipers and defrosters must operate properly to keep the camera zone clear in rain or fog. When the OEM requires a dynamic drive, technicians follow the specified drive cycle and confirm behavior for lane departure warning, lane keeping assist, adaptive cruise control, forward collision warning, automatic emergency braking, and any traffic sign recognition on that Ford Transit Connect Passenger. Documentation supports safety, insurance, and resale. Keep pre-scan/post-scan reports, calibration completion records, and service notes. Bang AutoGlass offers mobile, next-day replacement; most installs take 30 to 45 minutes with at least one hour of safe-drive time for adhesive cure. We accept comprehensive insurance and back our work with a lifetime workmanship warranty.
OEM-Specific Procedures on Ford Transit Connect Passenger: Why Calibration Steps Can Differ by Manufacturer
ADAS procedures are not universal, and Ford Transit Connect Passenger calibration steps can vary by manufacturer, model year, and trim. Some OEMs require only static calibration with targets and precise measurements, others require a dynamic calibration drive cycle, and many require both. Acceptable tolerances can include target shape and distance, lighting conditions, floor levelness, steering angle setup, and vehicle loading (fuel level, cargo removal, or specified weight). OEM guidance also covers parts and materials. Automakers often note that windshield optical quality in the camera zone, camera bracket geometry, and specified adhesives can affect how the forward-facing camera reads lane lines and objects. Using the wrong glass, a distorted viewing area, or a compromised mount can lead to inconsistent responses in lane keeping assist, adaptive cruise control, automatic emergency braking, or traffic sign recognition. Many vehicles will not complete calibration if related DTCs, aim errors, alignment issues, or tire-size mismatches are present. At Bang AutoGlass, we do not guess. We verify ADAS equipment for your Ford Transit Connect Passenger, reference VIN-specific OEM procedures, and coordinate the correct calibration method and documentation. You still get mobile, often next-day service, typical replacement time of 30 to 45 minutes, at least one hour of safe-drive time for adhesive cure, acceptance of comprehensive insurance, and a lifetime workmanship warranty.
Services
Service Areas
ADAS After Windshield Replacement on Ford Transit Connect Passenger: Calibration Basics and Safety Checks
Why ADAS Calibration Matters After Windshield Replacement on Ford Transit Connect Passenger
On many late-model Ford Transit Connect Passenger vehicles, the windshield is integrated into the ADAS system. The forward-facing camera views a defined camera zone, and the mount is engineered around OEM tolerances for glass position, bracket geometry, and urethane bead height. After windshield replacement, subtle changes in seating, bracket alignment, adhesive height, or windshield optics can shift the camera perspective enough to affect how it interprets lane markings and objects ahead. The risk can be subtle: features may turn on, but timing and positioning can be off, creating nuisance warnings, lane centering that hunts, adaptive cruise control distance errors, or automatic emergency braking that reacts late. Bang AutoGlass keeps the process straightforward. We offer mobile windshield replacement as soon as next day; most installations take 30 to 45 minutes, followed by at least one hour of safe-drive time for adhesive cure. If your Ford Transit Connect Passenger uses a windshield-mounted camera, we review calibration requirements up front, help coordinate the correct ADAS calibration approach, and provide documentation for you and your insurer. We accept all insurance companies with comprehensive coverage and back our work with a lifetime workmanship warranty.
Which Ford Transit Connect Passenger Systems Can Be Affected: Camera-Based ADAS Features and Safety Functions
When customers ask which Ford Transit Connect Passenger systems can be affected by windshield replacement, we focus on camera-based ADAS because a single forward-facing camera can support multiple features. Common camera-driven functions include lane departure warning, lane keeping assist, lane centering, forward collision warning, automatic emergency braking, following distance monitoring, traffic sign recognition, and automatic high beams. Depending on year and trim, the same module may also support pedestrian or cyclist detection and collision avoidance steering support. Even when radar or ultrasonic sensors are present, many vehicles use sensor fusion, blending inputs, so the camera still helps confirm lanes and classify objects ahead. Because ADAS equipment varies by model year and trim, technicians should verify configuration by VIN, scan for related fault codes, and follow the OEM calibration requirement for the exact repair operation. At Bang AutoGlass, we confirm what ADAS features your Ford Transit Connect Passenger is equipped with, inspect the camera mount and trim during replacement, and help coordinate any required windshield camera calibration so safety functions return to factory-level performance. We also review post-install warning indicators, advise on safe-drive time, and keep calibration records with the repair file for easier claims handling.
Static vs Dynamic ADAS Calibration for Ford Transit Connect Passenger: When Each Method Applies
Static versus dynamic ADAS calibration describes how the Ford Transit Connect Passenger windshield camera is returned to OEM specifications after new glass is installed. Static calibration is performed in a controlled environment using OEM targets, precise measurements, and a diagnostic scan tool. The setup must meet specification, including a level surface, correct target distance and height, centered steering wheel, proper tire pressure, correct ride height, and stable lighting. Dynamic calibration is completed through a prescribed drive cycle, with scan equipment connected while the Ford Transit Connect Passenger is driven on clearly marked roads within the required speed range and time window. Weather, visibility, and lane quality matter because the camera needs consistent cues to learn lanes and reference points. Some vehicles require one method, some require both, and others need additional initialization or fault clearing, so guessing is risky. After calibration, a final scan and basic road test help confirm the system is free of related codes and operating normally. Bang AutoGlass completes mobile windshield replacement in about 30 to 45 minutes, requires at least one hour of safe-drive time for urethane cure, and then helps coordinate the correct calibration with verification documentation when available.
Pre-Calibration Requirements: Pre-Scan, DTC Review, and Vehicle Setup Checks
Before any ADAS calibration on a Ford Transit Connect Passenger, the setup drives the outcome. We start with a pre-repair diagnostic scan (pre-scan) to document baseline condition, capture active/stored/pending diagnostic trouble codes (DTCs), and flag issues that can block calibration even when no warning light is on. After replacement, we confirm the vehicle is in an OEM-ready state and that any pre-existing faults are identified before calibration begins. OEM checks then focus on vehicle stance and visibility. The Ford Transit Connect Passenger should be at correct ride height with proper tire pressure, matching tire sizes, and no alignment, steering, or suspension concerns that could change camera aim. Excess cargo and uneven loading can shift attitude, so we keep the cabin and trunk clear. We also inspect the camera mount/bracket, verify the correct windshield type, and ensure the camera viewing zone is clean and distortion-free. Static calibration requires a level surface and precise target placement; dynamic calibration requires safe roads with clear lane markings. Bang AutoGlass provides mobile windshield replacement at home or work, often next day. Most installs take 30 to 45 minutes, and we require at least one hour of safe-drive time for adhesive cure before any road procedure or calibration drive.
Post-Calibration Safety Checks: Post-Scan Verification, Test Drive, and Documentation
After ADAS calibration on your Ford Transit Connect Passenger following windshield replacement, the work is only complete once results are verified. Post-calibration checks begin with a post-repair scan (post-scan) to confirm the routine finished successfully, required modules report a calibrated status, and no diagnostic trouble codes (DTCs) remain in the forward camera, radar (if equipped), steering, or ABS/ESC systems. If any codes return, the underlying issue should be corrected before relying on camera-based safety features. We then perform functional and fit checks. The camera area must be clean and unobstructed, interior trim and the camera housing must be seated securely, and wipers and defrosters must operate properly to keep the camera zone clear in rain or fog. When the OEM requires a dynamic drive, technicians follow the specified drive cycle and confirm behavior for lane departure warning, lane keeping assist, adaptive cruise control, forward collision warning, automatic emergency braking, and any traffic sign recognition on that Ford Transit Connect Passenger. Documentation supports safety, insurance, and resale. Keep pre-scan/post-scan reports, calibration completion records, and service notes. Bang AutoGlass offers mobile, next-day replacement; most installs take 30 to 45 minutes with at least one hour of safe-drive time for adhesive cure. We accept comprehensive insurance and back our work with a lifetime workmanship warranty.
OEM-Specific Procedures on Ford Transit Connect Passenger: Why Calibration Steps Can Differ by Manufacturer
ADAS procedures are not universal, and Ford Transit Connect Passenger calibration steps can vary by manufacturer, model year, and trim. Some OEMs require only static calibration with targets and precise measurements, others require a dynamic calibration drive cycle, and many require both. Acceptable tolerances can include target shape and distance, lighting conditions, floor levelness, steering angle setup, and vehicle loading (fuel level, cargo removal, or specified weight). OEM guidance also covers parts and materials. Automakers often note that windshield optical quality in the camera zone, camera bracket geometry, and specified adhesives can affect how the forward-facing camera reads lane lines and objects. Using the wrong glass, a distorted viewing area, or a compromised mount can lead to inconsistent responses in lane keeping assist, adaptive cruise control, automatic emergency braking, or traffic sign recognition. Many vehicles will not complete calibration if related DTCs, aim errors, alignment issues, or tire-size mismatches are present. At Bang AutoGlass, we do not guess. We verify ADAS equipment for your Ford Transit Connect Passenger, reference VIN-specific OEM procedures, and coordinate the correct calibration method and documentation. You still get mobile, often next-day service, typical replacement time of 30 to 45 minutes, at least one hour of safe-drive time for adhesive cure, acceptance of comprehensive insurance, and a lifetime workmanship warranty.
Services
Service Areas
ADAS After Windshield Replacement on Ford Transit Connect Passenger: Calibration Basics and Safety Checks
Why ADAS Calibration Matters After Windshield Replacement on Ford Transit Connect Passenger
On many late-model Ford Transit Connect Passenger vehicles, the windshield is integrated into the ADAS system. The forward-facing camera views a defined camera zone, and the mount is engineered around OEM tolerances for glass position, bracket geometry, and urethane bead height. After windshield replacement, subtle changes in seating, bracket alignment, adhesive height, or windshield optics can shift the camera perspective enough to affect how it interprets lane markings and objects ahead. The risk can be subtle: features may turn on, but timing and positioning can be off, creating nuisance warnings, lane centering that hunts, adaptive cruise control distance errors, or automatic emergency braking that reacts late. Bang AutoGlass keeps the process straightforward. We offer mobile windshield replacement as soon as next day; most installations take 30 to 45 minutes, followed by at least one hour of safe-drive time for adhesive cure. If your Ford Transit Connect Passenger uses a windshield-mounted camera, we review calibration requirements up front, help coordinate the correct ADAS calibration approach, and provide documentation for you and your insurer. We accept all insurance companies with comprehensive coverage and back our work with a lifetime workmanship warranty.
Which Ford Transit Connect Passenger Systems Can Be Affected: Camera-Based ADAS Features and Safety Functions
When customers ask which Ford Transit Connect Passenger systems can be affected by windshield replacement, we focus on camera-based ADAS because a single forward-facing camera can support multiple features. Common camera-driven functions include lane departure warning, lane keeping assist, lane centering, forward collision warning, automatic emergency braking, following distance monitoring, traffic sign recognition, and automatic high beams. Depending on year and trim, the same module may also support pedestrian or cyclist detection and collision avoidance steering support. Even when radar or ultrasonic sensors are present, many vehicles use sensor fusion, blending inputs, so the camera still helps confirm lanes and classify objects ahead. Because ADAS equipment varies by model year and trim, technicians should verify configuration by VIN, scan for related fault codes, and follow the OEM calibration requirement for the exact repair operation. At Bang AutoGlass, we confirm what ADAS features your Ford Transit Connect Passenger is equipped with, inspect the camera mount and trim during replacement, and help coordinate any required windshield camera calibration so safety functions return to factory-level performance. We also review post-install warning indicators, advise on safe-drive time, and keep calibration records with the repair file for easier claims handling.
Static vs Dynamic ADAS Calibration for Ford Transit Connect Passenger: When Each Method Applies
Static versus dynamic ADAS calibration describes how the Ford Transit Connect Passenger windshield camera is returned to OEM specifications after new glass is installed. Static calibration is performed in a controlled environment using OEM targets, precise measurements, and a diagnostic scan tool. The setup must meet specification, including a level surface, correct target distance and height, centered steering wheel, proper tire pressure, correct ride height, and stable lighting. Dynamic calibration is completed through a prescribed drive cycle, with scan equipment connected while the Ford Transit Connect Passenger is driven on clearly marked roads within the required speed range and time window. Weather, visibility, and lane quality matter because the camera needs consistent cues to learn lanes and reference points. Some vehicles require one method, some require both, and others need additional initialization or fault clearing, so guessing is risky. After calibration, a final scan and basic road test help confirm the system is free of related codes and operating normally. Bang AutoGlass completes mobile windshield replacement in about 30 to 45 minutes, requires at least one hour of safe-drive time for urethane cure, and then helps coordinate the correct calibration with verification documentation when available.
Pre-Calibration Requirements: Pre-Scan, DTC Review, and Vehicle Setup Checks
Before any ADAS calibration on a Ford Transit Connect Passenger, the setup drives the outcome. We start with a pre-repair diagnostic scan (pre-scan) to document baseline condition, capture active/stored/pending diagnostic trouble codes (DTCs), and flag issues that can block calibration even when no warning light is on. After replacement, we confirm the vehicle is in an OEM-ready state and that any pre-existing faults are identified before calibration begins. OEM checks then focus on vehicle stance and visibility. The Ford Transit Connect Passenger should be at correct ride height with proper tire pressure, matching tire sizes, and no alignment, steering, or suspension concerns that could change camera aim. Excess cargo and uneven loading can shift attitude, so we keep the cabin and trunk clear. We also inspect the camera mount/bracket, verify the correct windshield type, and ensure the camera viewing zone is clean and distortion-free. Static calibration requires a level surface and precise target placement; dynamic calibration requires safe roads with clear lane markings. Bang AutoGlass provides mobile windshield replacement at home or work, often next day. Most installs take 30 to 45 minutes, and we require at least one hour of safe-drive time for adhesive cure before any road procedure or calibration drive.
Post-Calibration Safety Checks: Post-Scan Verification, Test Drive, and Documentation
After ADAS calibration on your Ford Transit Connect Passenger following windshield replacement, the work is only complete once results are verified. Post-calibration checks begin with a post-repair scan (post-scan) to confirm the routine finished successfully, required modules report a calibrated status, and no diagnostic trouble codes (DTCs) remain in the forward camera, radar (if equipped), steering, or ABS/ESC systems. If any codes return, the underlying issue should be corrected before relying on camera-based safety features. We then perform functional and fit checks. The camera area must be clean and unobstructed, interior trim and the camera housing must be seated securely, and wipers and defrosters must operate properly to keep the camera zone clear in rain or fog. When the OEM requires a dynamic drive, technicians follow the specified drive cycle and confirm behavior for lane departure warning, lane keeping assist, adaptive cruise control, forward collision warning, automatic emergency braking, and any traffic sign recognition on that Ford Transit Connect Passenger. Documentation supports safety, insurance, and resale. Keep pre-scan/post-scan reports, calibration completion records, and service notes. Bang AutoGlass offers mobile, next-day replacement; most installs take 30 to 45 minutes with at least one hour of safe-drive time for adhesive cure. We accept comprehensive insurance and back our work with a lifetime workmanship warranty.
OEM-Specific Procedures on Ford Transit Connect Passenger: Why Calibration Steps Can Differ by Manufacturer
ADAS procedures are not universal, and Ford Transit Connect Passenger calibration steps can vary by manufacturer, model year, and trim. Some OEMs require only static calibration with targets and precise measurements, others require a dynamic calibration drive cycle, and many require both. Acceptable tolerances can include target shape and distance, lighting conditions, floor levelness, steering angle setup, and vehicle loading (fuel level, cargo removal, or specified weight). OEM guidance also covers parts and materials. Automakers often note that windshield optical quality in the camera zone, camera bracket geometry, and specified adhesives can affect how the forward-facing camera reads lane lines and objects. Using the wrong glass, a distorted viewing area, or a compromised mount can lead to inconsistent responses in lane keeping assist, adaptive cruise control, automatic emergency braking, or traffic sign recognition. Many vehicles will not complete calibration if related DTCs, aim errors, alignment issues, or tire-size mismatches are present. At Bang AutoGlass, we do not guess. We verify ADAS equipment for your Ford Transit Connect Passenger, reference VIN-specific OEM procedures, and coordinate the correct calibration method and documentation. You still get mobile, often next-day service, typical replacement time of 30 to 45 minutes, at least one hour of safe-drive time for adhesive cure, acceptance of comprehensive insurance, and a lifetime workmanship warranty.
Enjoy More Relevant Blogs
Tempered vs Laminated Door Glass on Dodge Ram 2500 Regular Cab: What’s Used and Why It Matters
Tempered vs laminated door glass on Dodge Ram 2500 Regular Cab: what your vehicle uses, how it breaks, and what it means for replacement safety, cost, and cleanup.
How to Schedule ADAS Calibration for Ford F250 Super Duty Crew Cab After Windshield Replacement
Schedule ADAS calibration for Ford F250 Super Duty Crew Cab after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
After a Break-In: Dodge Challenger Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Dodge Challenger, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Will Insurance Cover Door Glass Replacement for a Ford Focus RS? Claims Steps, Deductibles, and What to Document
Will insurance cover Ford Focus RS door glass replacement? Learn claim steps, deductibles, photos to document, and how to schedule fast repairs today.
ADAS After Windshield Replacement on Gmc Terrain: Calibration Basics and Safety Checks
ADAS after Gmc Terrain windshield replacement: calibration basics, common safety checks, and how to confirm cameras and sensors are working correctly.
How to Schedule Mobile Rear Glass Replacement for Gmc Rally Wagon 2500
Schedule mobile rear glass replacement for your Gmc Rally Wagon 2500 in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Stop Leaks and Wind Noise: What Proper Dodge Durango Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Dodge Durango quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
Tempered Safety Rear Glass Replacement for Gmc Canyon Crew Cab: Understanding DOT Markings and FMVSS 205
Need Gmc Canyon Crew Cab rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Post-Install Checks for Gmc Sierra (Classic) 1500 Extended Cab: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Gmc Sierra (Classic) 1500 Extended Cab: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Fast Scheduling Guide: Gmc Sierra 3500 Hd Extended Cab Windshield Replacement From Booking to Install
Book Gmc Sierra 3500 Hd Extended Cab windshield replacement fast. See scheduling steps, what to prep, install timing, and when you can safely drive away. Get a quote today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm