Services
Service Areas
Static vs Dynamic ADAS Calibration for Genesis GV80 Coupe: What the Difference Means
Static vs Dynamic Calibration on Genesis GV80 Coupe: Core Differences in Method and Environment
ADAS calibration on a Genesis GV80 Coupe is not one universal step. OEMs specify either static calibration, dynamic calibration, or a combination, depending on the sensor package, model year, and trim. Static calibration is performed with the vehicle parked, using manufacturer targets placed at exact distances so the forward camera, radar, or other ADAS sensors can reset to a known baseline. Dynamic calibration is performed on the road, where the Genesis GV80 Coupe learns from lane lines, road edges, and vehicle motion until the control module confirms completion. Think of it as controlled setup versus controlled driving. Static work depends on a level surface, consistent lighting, precise target placement, and a clear calibration zone. Dynamic work depends on readable lane paint, the required speed window, stable traffic flow, and enough uninterrupted time without glare or weather that interrupts learning. Bang AutoGlass coordinates the OEM-correct method for your exact Genesis GV80 Coupe after windshield replacement or ADAS-related repairs. Our mobile team can come to your home or workplace, often as soon as next day. Windshield replacement typically takes 30-45 minutes, followed by at least one hour of adhesive cure time before normal driving. We accept all insurance companies with comprehensive coverage and back our workmanship with a lifetime warranty.
Static ADAS Calibration for Genesis GV80 Coupe: Targets, Measurements, and Shop Setup Requirements
Static ADAS calibration on a Genesis GV80 Coupe is the target-based method, built on precision and repeatability. The vehicle remains parked while the technician runs the OEM routine for the forward-facing camera behind the windshield and, where equipped, radar or other driver-assistance sensors. OEM targets (pattern boards, reflectors, or similar) are positioned at exact distances, heights, and centerline offsets from the Genesis GV80 Coupe. These measurements are rarely "close enough"; manufacturers often specify millimeters and require the target to be perfectly square to the vehicle. Because the target is the reference, the environment matters. A compliant static setup typically needs a level floor, consistent lighting, and clear space in front of the vehicle so nothing blocks the sensor's view or creates visual noise. OEM preconditions commonly include correct tire pressure, normal ride height, centered steering, and no unusual load. A pre-scan confirms there are no active faults, and alignment issues (toe or thrust angle) are often checked because they can alter camera aim. Bang AutoGlass evaluates your site for suitability and coordinates a dedicated bay when required, so your Genesis GV80 Coupe stays OEM-compliant. We provide insurance-ready documentation and back our work with a lifetime workmanship warranty.
Dynamic ADAS Calibration for Genesis GV80 Coupe: Road Conditions, Speed Windows, and System Learning
When a Genesis GV80 Coupe needs dynamic ADAS calibration, learning happens on the road instead of against shop targets. The technician starts the OEM routine and the vehicle refines camera and sensor interpretation during a controlled drive. The module collects data from clear lane lines, defined road edges, and steady vehicle motion until it reports calibration complete. OEM procedures set the rules: an acceptable speed range, roadway type, and minimum uninterrupted drive time. Glare, rain, fog, snow, faded paint, construction zones, or stop-and-go congestion can pause learning or force a restart. A scan tool may be used to monitor status, confirm completion, and check for any remaining faults. Bang AutoGlass coordinates dynamic calibration to match your Genesis GV80 Coupe requirements and documents results. With mobile service, we can meet you and choose a nearby route with suitable speeds and well-marked lanes. If windshield replacement is included, allow 30-45 minutes for installation plus at least one hour of adhesive cure time before driving. We accept all insurance companies with comprehensive coverage and back our workmanship with a lifetime warranty.
When Genesis GV80 Coupe Needs Both: Why Procedures Are Not Interchangeable and OEM Order Matters
When your Genesis GV80 Coupe needs both static ADAS calibration and dynamic ADAS calibration (dual calibration), the steps serve different purposes. Static calibration is target-based, setting the baseline for the forward camera and any radar sensors—centerline, pitch/yaw, and sensor aim. Dynamic calibration is the on-road learning drive that confirms the system can interpret lane markings. OEMs may require a specific order (commonly static first, dynamic second) so sensors agree; skipping a required step can leave ADAS out of specification even without warning lights. Dual calibration is commonly required after windshield replacement or camera removal/reinstall, front bumper or radar work, collision repairs affecting sensor brackets, wheel alignment, or suspension and ride-height changes. Small geometry shifts can affect lane keep assist, lane departure warning, adaptive cruise control, and automatic emergency braking. Bang AutoGlass treats calibration as safety-critical. We follow OEM procedures for your Genesis GV80 Coupe, provide insurance-friendly documentation, and offer mobile service to your home or workplace—often as soon as next day. If a windshield install is included, expect 30–45 minutes plus at least one hour of adhesive cure time before safe driving. We accept comprehensive coverage and back our work with a lifetime workmanship warranty.
How to Confirm the Required Method for Genesis GV80 Coupe: OEM Procedures, DTCs, and Calibration Triggers
To confirm whether your Genesis GV80 Coupe needs static calibration, dynamic calibration, or both, treat ADAS like an OEM repair procedure—not a guess. Start with OEM service information for the exact VIN, year, and trim, because option packages and software revisions can change the required method and triggers. Then support that plan with diagnostics: a professional pre-scan can reveal stored or pending DTCs, “not calibrated” status, steering angle sensor issues, and camera or radar faults that could prevent calibration or point to another repair. One key nuance is that scans don’t replace OEM instructions. Some required calibrations won’t trigger a warning light, and some DTCs point to an underlying fault that must be repaired before calibration will complete. The safest workflow is: verify OEM requirements, run a pre-scan, correct any blocking issues, and perform the specified static and/or dynamic routine. Common triggers on a Genesis GV80 Coupe include windshield replacement or camera R&I, front bumper/radar work, collision repairs, wheel alignment, suspension or ride-height changes, module replacement, and some software updates. Bang AutoGlass verifies requirements using OEM procedures plus pre-scan findings, offers mobile service often as soon as next day, and accepts comprehensive insurance.
Proof It’s Correct: Pre/Post Scans, Calibration Reports, and Final Safety Checks for Genesis GV80 Coupe
With a Genesis GV80 Coupe, “calibrated” should mean demonstrated completion, not assumption. Best practice is an end-to-end record: a pre-scan that captures baseline module status and any ADAS-related DTCs, the OEM-required calibration routine (static, dynamic, or dual), and a post-scan confirming the vehicle reports calibration complete with no remaining faults. When available, an ADAS recalibration report bundles identifiers, timestamps, and results for insurance and shop records. A meaningful report lists what was calibrated on the Genesis GV80 Coupe (forward camera and/or radar) and the features supported, such as lane departure warning, lane keep assist, adaptive cruise control, and automatic emergency braking. It should show the method used and completion evidence like scan-tool success indicators. For static calibration, include target placement and setup verification notes. For dynamic calibration, confirm the required speed window and acceptable road markings, plus completion status. If dual calibration is required, the documentation should show both steps were completed. Finally, confirm readiness: secure camera mounting, correct trim fitment, clean sensors, unobstructed camera view, and a controlled road test. Bang AutoGlass supports this standard with mobile service often as soon as next day, insurance-friendly documentation, and a lifetime workmanship warranty.
Services
Service Areas
Static vs Dynamic ADAS Calibration for Genesis GV80 Coupe: What the Difference Means
Static vs Dynamic Calibration on Genesis GV80 Coupe: Core Differences in Method and Environment
ADAS calibration on a Genesis GV80 Coupe is not one universal step. OEMs specify either static calibration, dynamic calibration, or a combination, depending on the sensor package, model year, and trim. Static calibration is performed with the vehicle parked, using manufacturer targets placed at exact distances so the forward camera, radar, or other ADAS sensors can reset to a known baseline. Dynamic calibration is performed on the road, where the Genesis GV80 Coupe learns from lane lines, road edges, and vehicle motion until the control module confirms completion. Think of it as controlled setup versus controlled driving. Static work depends on a level surface, consistent lighting, precise target placement, and a clear calibration zone. Dynamic work depends on readable lane paint, the required speed window, stable traffic flow, and enough uninterrupted time without glare or weather that interrupts learning. Bang AutoGlass coordinates the OEM-correct method for your exact Genesis GV80 Coupe after windshield replacement or ADAS-related repairs. Our mobile team can come to your home or workplace, often as soon as next day. Windshield replacement typically takes 30-45 minutes, followed by at least one hour of adhesive cure time before normal driving. We accept all insurance companies with comprehensive coverage and back our workmanship with a lifetime warranty.
Static ADAS Calibration for Genesis GV80 Coupe: Targets, Measurements, and Shop Setup Requirements
Static ADAS calibration on a Genesis GV80 Coupe is the target-based method, built on precision and repeatability. The vehicle remains parked while the technician runs the OEM routine for the forward-facing camera behind the windshield and, where equipped, radar or other driver-assistance sensors. OEM targets (pattern boards, reflectors, or similar) are positioned at exact distances, heights, and centerline offsets from the Genesis GV80 Coupe. These measurements are rarely "close enough"; manufacturers often specify millimeters and require the target to be perfectly square to the vehicle. Because the target is the reference, the environment matters. A compliant static setup typically needs a level floor, consistent lighting, and clear space in front of the vehicle so nothing blocks the sensor's view or creates visual noise. OEM preconditions commonly include correct tire pressure, normal ride height, centered steering, and no unusual load. A pre-scan confirms there are no active faults, and alignment issues (toe or thrust angle) are often checked because they can alter camera aim. Bang AutoGlass evaluates your site for suitability and coordinates a dedicated bay when required, so your Genesis GV80 Coupe stays OEM-compliant. We provide insurance-ready documentation and back our work with a lifetime workmanship warranty.
Dynamic ADAS Calibration for Genesis GV80 Coupe: Road Conditions, Speed Windows, and System Learning
When a Genesis GV80 Coupe needs dynamic ADAS calibration, learning happens on the road instead of against shop targets. The technician starts the OEM routine and the vehicle refines camera and sensor interpretation during a controlled drive. The module collects data from clear lane lines, defined road edges, and steady vehicle motion until it reports calibration complete. OEM procedures set the rules: an acceptable speed range, roadway type, and minimum uninterrupted drive time. Glare, rain, fog, snow, faded paint, construction zones, or stop-and-go congestion can pause learning or force a restart. A scan tool may be used to monitor status, confirm completion, and check for any remaining faults. Bang AutoGlass coordinates dynamic calibration to match your Genesis GV80 Coupe requirements and documents results. With mobile service, we can meet you and choose a nearby route with suitable speeds and well-marked lanes. If windshield replacement is included, allow 30-45 minutes for installation plus at least one hour of adhesive cure time before driving. We accept all insurance companies with comprehensive coverage and back our workmanship with a lifetime warranty.
When Genesis GV80 Coupe Needs Both: Why Procedures Are Not Interchangeable and OEM Order Matters
When your Genesis GV80 Coupe needs both static ADAS calibration and dynamic ADAS calibration (dual calibration), the steps serve different purposes. Static calibration is target-based, setting the baseline for the forward camera and any radar sensors—centerline, pitch/yaw, and sensor aim. Dynamic calibration is the on-road learning drive that confirms the system can interpret lane markings. OEMs may require a specific order (commonly static first, dynamic second) so sensors agree; skipping a required step can leave ADAS out of specification even without warning lights. Dual calibration is commonly required after windshield replacement or camera removal/reinstall, front bumper or radar work, collision repairs affecting sensor brackets, wheel alignment, or suspension and ride-height changes. Small geometry shifts can affect lane keep assist, lane departure warning, adaptive cruise control, and automatic emergency braking. Bang AutoGlass treats calibration as safety-critical. We follow OEM procedures for your Genesis GV80 Coupe, provide insurance-friendly documentation, and offer mobile service to your home or workplace—often as soon as next day. If a windshield install is included, expect 30–45 minutes plus at least one hour of adhesive cure time before safe driving. We accept comprehensive coverage and back our work with a lifetime workmanship warranty.
How to Confirm the Required Method for Genesis GV80 Coupe: OEM Procedures, DTCs, and Calibration Triggers
To confirm whether your Genesis GV80 Coupe needs static calibration, dynamic calibration, or both, treat ADAS like an OEM repair procedure—not a guess. Start with OEM service information for the exact VIN, year, and trim, because option packages and software revisions can change the required method and triggers. Then support that plan with diagnostics: a professional pre-scan can reveal stored or pending DTCs, “not calibrated” status, steering angle sensor issues, and camera or radar faults that could prevent calibration or point to another repair. One key nuance is that scans don’t replace OEM instructions. Some required calibrations won’t trigger a warning light, and some DTCs point to an underlying fault that must be repaired before calibration will complete. The safest workflow is: verify OEM requirements, run a pre-scan, correct any blocking issues, and perform the specified static and/or dynamic routine. Common triggers on a Genesis GV80 Coupe include windshield replacement or camera R&I, front bumper/radar work, collision repairs, wheel alignment, suspension or ride-height changes, module replacement, and some software updates. Bang AutoGlass verifies requirements using OEM procedures plus pre-scan findings, offers mobile service often as soon as next day, and accepts comprehensive insurance.
Proof It’s Correct: Pre/Post Scans, Calibration Reports, and Final Safety Checks for Genesis GV80 Coupe
With a Genesis GV80 Coupe, “calibrated” should mean demonstrated completion, not assumption. Best practice is an end-to-end record: a pre-scan that captures baseline module status and any ADAS-related DTCs, the OEM-required calibration routine (static, dynamic, or dual), and a post-scan confirming the vehicle reports calibration complete with no remaining faults. When available, an ADAS recalibration report bundles identifiers, timestamps, and results for insurance and shop records. A meaningful report lists what was calibrated on the Genesis GV80 Coupe (forward camera and/or radar) and the features supported, such as lane departure warning, lane keep assist, adaptive cruise control, and automatic emergency braking. It should show the method used and completion evidence like scan-tool success indicators. For static calibration, include target placement and setup verification notes. For dynamic calibration, confirm the required speed window and acceptable road markings, plus completion status. If dual calibration is required, the documentation should show both steps were completed. Finally, confirm readiness: secure camera mounting, correct trim fitment, clean sensors, unobstructed camera view, and a controlled road test. Bang AutoGlass supports this standard with mobile service often as soon as next day, insurance-friendly documentation, and a lifetime workmanship warranty.
Services
Service Areas
Static vs Dynamic ADAS Calibration for Genesis GV80 Coupe: What the Difference Means
Static vs Dynamic Calibration on Genesis GV80 Coupe: Core Differences in Method and Environment
ADAS calibration on a Genesis GV80 Coupe is not one universal step. OEMs specify either static calibration, dynamic calibration, or a combination, depending on the sensor package, model year, and trim. Static calibration is performed with the vehicle parked, using manufacturer targets placed at exact distances so the forward camera, radar, or other ADAS sensors can reset to a known baseline. Dynamic calibration is performed on the road, where the Genesis GV80 Coupe learns from lane lines, road edges, and vehicle motion until the control module confirms completion. Think of it as controlled setup versus controlled driving. Static work depends on a level surface, consistent lighting, precise target placement, and a clear calibration zone. Dynamic work depends on readable lane paint, the required speed window, stable traffic flow, and enough uninterrupted time without glare or weather that interrupts learning. Bang AutoGlass coordinates the OEM-correct method for your exact Genesis GV80 Coupe after windshield replacement or ADAS-related repairs. Our mobile team can come to your home or workplace, often as soon as next day. Windshield replacement typically takes 30-45 minutes, followed by at least one hour of adhesive cure time before normal driving. We accept all insurance companies with comprehensive coverage and back our workmanship with a lifetime warranty.
Static ADAS Calibration for Genesis GV80 Coupe: Targets, Measurements, and Shop Setup Requirements
Static ADAS calibration on a Genesis GV80 Coupe is the target-based method, built on precision and repeatability. The vehicle remains parked while the technician runs the OEM routine for the forward-facing camera behind the windshield and, where equipped, radar or other driver-assistance sensors. OEM targets (pattern boards, reflectors, or similar) are positioned at exact distances, heights, and centerline offsets from the Genesis GV80 Coupe. These measurements are rarely "close enough"; manufacturers often specify millimeters and require the target to be perfectly square to the vehicle. Because the target is the reference, the environment matters. A compliant static setup typically needs a level floor, consistent lighting, and clear space in front of the vehicle so nothing blocks the sensor's view or creates visual noise. OEM preconditions commonly include correct tire pressure, normal ride height, centered steering, and no unusual load. A pre-scan confirms there are no active faults, and alignment issues (toe or thrust angle) are often checked because they can alter camera aim. Bang AutoGlass evaluates your site for suitability and coordinates a dedicated bay when required, so your Genesis GV80 Coupe stays OEM-compliant. We provide insurance-ready documentation and back our work with a lifetime workmanship warranty.
Dynamic ADAS Calibration for Genesis GV80 Coupe: Road Conditions, Speed Windows, and System Learning
When a Genesis GV80 Coupe needs dynamic ADAS calibration, learning happens on the road instead of against shop targets. The technician starts the OEM routine and the vehicle refines camera and sensor interpretation during a controlled drive. The module collects data from clear lane lines, defined road edges, and steady vehicle motion until it reports calibration complete. OEM procedures set the rules: an acceptable speed range, roadway type, and minimum uninterrupted drive time. Glare, rain, fog, snow, faded paint, construction zones, or stop-and-go congestion can pause learning or force a restart. A scan tool may be used to monitor status, confirm completion, and check for any remaining faults. Bang AutoGlass coordinates dynamic calibration to match your Genesis GV80 Coupe requirements and documents results. With mobile service, we can meet you and choose a nearby route with suitable speeds and well-marked lanes. If windshield replacement is included, allow 30-45 minutes for installation plus at least one hour of adhesive cure time before driving. We accept all insurance companies with comprehensive coverage and back our workmanship with a lifetime warranty.
When Genesis GV80 Coupe Needs Both: Why Procedures Are Not Interchangeable and OEM Order Matters
When your Genesis GV80 Coupe needs both static ADAS calibration and dynamic ADAS calibration (dual calibration), the steps serve different purposes. Static calibration is target-based, setting the baseline for the forward camera and any radar sensors—centerline, pitch/yaw, and sensor aim. Dynamic calibration is the on-road learning drive that confirms the system can interpret lane markings. OEMs may require a specific order (commonly static first, dynamic second) so sensors agree; skipping a required step can leave ADAS out of specification even without warning lights. Dual calibration is commonly required after windshield replacement or camera removal/reinstall, front bumper or radar work, collision repairs affecting sensor brackets, wheel alignment, or suspension and ride-height changes. Small geometry shifts can affect lane keep assist, lane departure warning, adaptive cruise control, and automatic emergency braking. Bang AutoGlass treats calibration as safety-critical. We follow OEM procedures for your Genesis GV80 Coupe, provide insurance-friendly documentation, and offer mobile service to your home or workplace—often as soon as next day. If a windshield install is included, expect 30–45 minutes plus at least one hour of adhesive cure time before safe driving. We accept comprehensive coverage and back our work with a lifetime workmanship warranty.
How to Confirm the Required Method for Genesis GV80 Coupe: OEM Procedures, DTCs, and Calibration Triggers
To confirm whether your Genesis GV80 Coupe needs static calibration, dynamic calibration, or both, treat ADAS like an OEM repair procedure—not a guess. Start with OEM service information for the exact VIN, year, and trim, because option packages and software revisions can change the required method and triggers. Then support that plan with diagnostics: a professional pre-scan can reveal stored or pending DTCs, “not calibrated” status, steering angle sensor issues, and camera or radar faults that could prevent calibration or point to another repair. One key nuance is that scans don’t replace OEM instructions. Some required calibrations won’t trigger a warning light, and some DTCs point to an underlying fault that must be repaired before calibration will complete. The safest workflow is: verify OEM requirements, run a pre-scan, correct any blocking issues, and perform the specified static and/or dynamic routine. Common triggers on a Genesis GV80 Coupe include windshield replacement or camera R&I, front bumper/radar work, collision repairs, wheel alignment, suspension or ride-height changes, module replacement, and some software updates. Bang AutoGlass verifies requirements using OEM procedures plus pre-scan findings, offers mobile service often as soon as next day, and accepts comprehensive insurance.
Proof It’s Correct: Pre/Post Scans, Calibration Reports, and Final Safety Checks for Genesis GV80 Coupe
With a Genesis GV80 Coupe, “calibrated” should mean demonstrated completion, not assumption. Best practice is an end-to-end record: a pre-scan that captures baseline module status and any ADAS-related DTCs, the OEM-required calibration routine (static, dynamic, or dual), and a post-scan confirming the vehicle reports calibration complete with no remaining faults. When available, an ADAS recalibration report bundles identifiers, timestamps, and results for insurance and shop records. A meaningful report lists what was calibrated on the Genesis GV80 Coupe (forward camera and/or radar) and the features supported, such as lane departure warning, lane keep assist, adaptive cruise control, and automatic emergency braking. It should show the method used and completion evidence like scan-tool success indicators. For static calibration, include target placement and setup verification notes. For dynamic calibration, confirm the required speed window and acceptable road markings, plus completion status. If dual calibration is required, the documentation should show both steps were completed. Finally, confirm readiness: secure camera mounting, correct trim fitment, clean sensors, unobstructed camera view, and a controlled road test. Bang AutoGlass supports this standard with mobile service often as soon as next day, insurance-friendly documentation, and a lifetime workmanship warranty.
Enjoy More Relevant Blogs
Tempered vs Laminated Door Glass on Dodge Ram 2500 Regular Cab: What’s Used and Why It Matters
Tempered vs laminated door glass on Dodge Ram 2500 Regular Cab: what your vehicle uses, how it breaks, and what it means for replacement safety, cost, and cleanup.
How to Schedule ADAS Calibration for Ford F250 Super Duty Crew Cab After Windshield Replacement
Schedule ADAS calibration for Ford F250 Super Duty Crew Cab after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
After a Break-In: Dodge Challenger Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Dodge Challenger, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Will Insurance Cover Door Glass Replacement for a Ford Focus RS? Claims Steps, Deductibles, and What to Document
Will insurance cover Ford Focus RS door glass replacement? Learn claim steps, deductibles, photos to document, and how to schedule fast repairs today.
ADAS After Windshield Replacement on Gmc Terrain: Calibration Basics and Safety Checks
ADAS after Gmc Terrain windshield replacement: calibration basics, common safety checks, and how to confirm cameras and sensors are working correctly.
How to Schedule Mobile Rear Glass Replacement for Gmc Rally Wagon 2500
Schedule mobile rear glass replacement for your Gmc Rally Wagon 2500 in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Stop Leaks and Wind Noise: What Proper Dodge Durango Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Dodge Durango quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
Tempered Safety Rear Glass Replacement for Gmc Canyon Crew Cab: Understanding DOT Markings and FMVSS 205
Need Gmc Canyon Crew Cab rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Post-Install Checks for Gmc Sierra (Classic) 1500 Extended Cab: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Gmc Sierra (Classic) 1500 Extended Cab: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Fast Scheduling Guide: Gmc Sierra 3500 Hd Extended Cab Windshield Replacement From Booking to Install
Book Gmc Sierra 3500 Hd Extended Cab windshield replacement fast. See scheduling steps, what to prep, install timing, and when you can safely drive away. Get a quote today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm