Services
Service Areas
Quarter Window Replacement for Mitsubishi I-Miev: Step-by-Step From Cleanup to Drive-Away Time
Cleanup After Quarter Window Breakage on Mitsubishi I-Miev: Safe Glass Removal and Interior Protection
When a quarter window breaks on your Mitsubishi I-Miev, the quickest way to create lingering problems is rushing cleanup. Quarter glass is tempered, so it shatters into small “pebbles” that hide in carpet, seat tracks, door pockets, and trim seams. Treat every fragment as a safety issue. Start with protection: cut-resistant gloves and eye protection, and keep kids and pets away. Lift out larger pieces from the frame and lower sill—never press down on the pile. Scoop with a dustpan or stiff cardboard, then vacuum with a hose and crevice tool, working from trim down through seats, carpet, floor mats, and the cargo area. Avoid hard sweeping that pushes fines deeper. Finish upholstery with wide tape or a lint roller to lift tiny shards you cannot see, and wipe hard plastics with a damp microfiber to trap remaining grit. If you need a temporary cover, tape plastic sheeting from the inside using painter’s tape for a tight, weather-resistant seal that won’t pull paint. Then book Bang AutoGlass for mobile quarter window replacement: we arrive with the right quarter glass, perform a final interior glass sweep, and restore your Mitsubishi I-Miev to a safe, weather-tight daily driver—often as soon as next day.
Verify the Correct Quarter Glass for Mitsubishi I-Miev: Fixed vs Pop-Out, Tint Match, and DOT Markings
Quarter window replacement only seems simple until the wrong part arrives. For your Mitsubishi I-Miev, we verify fitment before any adhesive is mixed so there are no surprises at install time. We confirm the quarter glass design—fixed bonded glass versus a pop-out/vent unit—and double-check mounting details such as studs, locator pins, and whether molding is pre-attached (encapsulated) or transferred. Those features determine seating depth, exterior reveal lines, and whether interior trim clips in without stress. Next we match appearance: clear or privacy-tinted glass, shade consistency, and how existing window film affects the final tone. We also inspect compliance markings on the glass “bug,” including DOT code, safety identifiers, and the proper AS rating for quarter glass. On some packages, quarter glass includes embedded antenna elements; when applicable, we confirm compatibility. This verification prevents common outcomes like wind noise, slow leaks, or molding that won’t sit flush. The goal is an OEM-style Mitsubishi I-Miev quarter window replacement that fits right the first time, and if comprehensive coverage applies, Bang AutoGlass can coordinate with your insurance company and streamline paperwork.
Remove Trim and Old Glass: Mitsubishi I-Miev Quarter Window Replacement Disassembly Checklist
Quarter window replacement on a Mitsubishi I-Miev depends on controlled access: remove only what’s necessary, protect painted edges, and keep clips intact so the car goes back together without rattles. We start by stabilizing the work area—powering down accessories, opening another door or window to reduce pressure changes, and masking adjacent paint, weatherstrips, and trim. From inside the vehicle, we move the minimum panels needed (often a rear seat bolster, quarter trim, and cargo-side panels), using non-marring tools and organizing hardware so every fastener returns to its original location. We work carefully around seatbelt anchors and curtain airbag zones to avoid damage and warning lights. Release method depends on the Mitsubishi I-Miev design: bonded glass is separated by cutting the urethane bead cleanly without gouging the pinchweld or bending the flange; bolt-in or framed styles require supporting the glass as retainers are removed to prevent a sudden drop. After removal, we re-vacuum the cavity, address any damaged molding, and prep the opening for installation. Most mobile replacements take about 30–45 minutes for the swap, followed by adhesive cure time before safe drive-away.
Prep the Pinchweld and Bond Area: Corrosion Checks, Primers, and Adhesion Readiness
A clean, long-lasting quarter window replacement on your Mitsubishi I-Miev starts with bond prep, not the new glass. For bonded quarter glass, the pinchweld (the metal flange around the opening) and the glass bond band must be stable and clean so urethane can fully adhere. At Bang AutoGlass, we begin with a corrosion and coating check for rust, bubbling paint, exposed metal, and prior repair residue that can weaken the seal and cause leaks. We preserve factory E-coat and sound paint whenever possible, then trim the old urethane down to a thin, uniform base layer so fresh urethane can bond to a consistent substrate. If any bare metal is exposed from corrosion cleanup or a cutting nick, we treat it with the correct refinish/body primer per adhesive and refinish guidance, and apply pinchweld primer when the urethane system requires it. On the glass side, we clean the bond area and use the appropriate activator or glass/frit primer as specified to promote adhesion and UV protection at the bond line. Contamination control is strict: no silicone products, no oily fingerprints, and no skipped flash times. We dry-fit the quarter glass to confirm alignment, reveal, and trim engagement, then mask adjacent paint for a crisp finished edge. This prep prevents water intrusion and supports an OEM-style seal—often completed at your location by our mobile auto glass team.
Urethane Bonding and Minimum Drive-Away Time for Mitsubishi I-Miev: SDAT Factors You Must Follow
Urethane bonding is the step that decides whether your Mitsubishi I-Miev quarter window replacement stays quiet and watertight or develops leaks and wind noise. Bang AutoGlass uses automotive-grade urethane and applies a continuous, properly sized bead to maintain correct stand-off, seat depth, and support for surrounding moldings. Corners and transitions are treated carefully because thin spots can become leak paths. We set the quarter glass on its locators, align it to body lines, and confirm uniform contact around the perimeter without over-compressing the bead. The glass is then stabilized so it cannot shift while curing begins. Safe Drive-Away Time (SDAT) is mandatory and depends on the specific urethane system plus ambient temperature and relative humidity. Cooler, drier conditions typically slow cure, while warmer, more humid air generally accelerates it, which is why professional adhesive systems publish SDAT procedures and charts. As our baseline standard, we require at least one full hour before your Mitsubishi I-Miev is considered safe to drive, even though the install often takes about 30–45 minutes. During early cure, avoid door slams, aggressive window operation, and rough roads that flex the body opening. For best results, postpone high-pressure washing for 24–48 hours and keep the bond line undisturbed. Need convenience? Our mobile auto glass service comes to you, and we work with all insurance companies when comprehensive coverage applies.
Final Quality Checks: Leak Test, Wind Noise, Trim Fit, and Documentation for Mitsubishi I-Miev
Before we return your Mitsubishi I-Miev, we complete quality control to confirm the quarter window replacement looks right and seals right. We start with a full visual inspection inside and outside: the quarter glass should be centered, the reveal lines should match the opposite side, and molding or encapsulation must sit flush with no corner lifts, gaps, or uneven edges. We verify urethane contact and ensure trim can seat properly without stress. Next, we confirm interior trim fitment and clip engagement so you do not inherit future buzzes, rattles, or loose panels in the quarter or cargo area. Leak prevention is validated with a controlled water test: a steady hose stream along the perimeter while we observe the interior edge and quarter cavity for moisture. If wind noise is a concern, we check perimeter contact points and trim alignment, since small edge separations can whistle at speed. We then clean the glass, remove protective tape, and ensure surrounding paint and trim are left clean and free of residue. To close out, we document part verification, DOT markings, installation notes, and aftercare, including the minimum one-hour safe drive-away time and avoiding high-pressure washes for 24–48 hours. Your paperwork reflects our lifetime workmanship warranty, and if you are filing a claim we can assist with any insurer when comprehensive coverage applies. The result is a Mitsubishi I-Miev quarter window replacement that is verified, documented, and ready for normal use—often completed at your location by our mobile auto glass team.
Services
Service Areas
Quarter Window Replacement for Mitsubishi I-Miev: Step-by-Step From Cleanup to Drive-Away Time
Cleanup After Quarter Window Breakage on Mitsubishi I-Miev: Safe Glass Removal and Interior Protection
When a quarter window breaks on your Mitsubishi I-Miev, the quickest way to create lingering problems is rushing cleanup. Quarter glass is tempered, so it shatters into small “pebbles” that hide in carpet, seat tracks, door pockets, and trim seams. Treat every fragment as a safety issue. Start with protection: cut-resistant gloves and eye protection, and keep kids and pets away. Lift out larger pieces from the frame and lower sill—never press down on the pile. Scoop with a dustpan or stiff cardboard, then vacuum with a hose and crevice tool, working from trim down through seats, carpet, floor mats, and the cargo area. Avoid hard sweeping that pushes fines deeper. Finish upholstery with wide tape or a lint roller to lift tiny shards you cannot see, and wipe hard plastics with a damp microfiber to trap remaining grit. If you need a temporary cover, tape plastic sheeting from the inside using painter’s tape for a tight, weather-resistant seal that won’t pull paint. Then book Bang AutoGlass for mobile quarter window replacement: we arrive with the right quarter glass, perform a final interior glass sweep, and restore your Mitsubishi I-Miev to a safe, weather-tight daily driver—often as soon as next day.
Verify the Correct Quarter Glass for Mitsubishi I-Miev: Fixed vs Pop-Out, Tint Match, and DOT Markings
Quarter window replacement only seems simple until the wrong part arrives. For your Mitsubishi I-Miev, we verify fitment before any adhesive is mixed so there are no surprises at install time. We confirm the quarter glass design—fixed bonded glass versus a pop-out/vent unit—and double-check mounting details such as studs, locator pins, and whether molding is pre-attached (encapsulated) or transferred. Those features determine seating depth, exterior reveal lines, and whether interior trim clips in without stress. Next we match appearance: clear or privacy-tinted glass, shade consistency, and how existing window film affects the final tone. We also inspect compliance markings on the glass “bug,” including DOT code, safety identifiers, and the proper AS rating for quarter glass. On some packages, quarter glass includes embedded antenna elements; when applicable, we confirm compatibility. This verification prevents common outcomes like wind noise, slow leaks, or molding that won’t sit flush. The goal is an OEM-style Mitsubishi I-Miev quarter window replacement that fits right the first time, and if comprehensive coverage applies, Bang AutoGlass can coordinate with your insurance company and streamline paperwork.
Remove Trim and Old Glass: Mitsubishi I-Miev Quarter Window Replacement Disassembly Checklist
Quarter window replacement on a Mitsubishi I-Miev depends on controlled access: remove only what’s necessary, protect painted edges, and keep clips intact so the car goes back together without rattles. We start by stabilizing the work area—powering down accessories, opening another door or window to reduce pressure changes, and masking adjacent paint, weatherstrips, and trim. From inside the vehicle, we move the minimum panels needed (often a rear seat bolster, quarter trim, and cargo-side panels), using non-marring tools and organizing hardware so every fastener returns to its original location. We work carefully around seatbelt anchors and curtain airbag zones to avoid damage and warning lights. Release method depends on the Mitsubishi I-Miev design: bonded glass is separated by cutting the urethane bead cleanly without gouging the pinchweld or bending the flange; bolt-in or framed styles require supporting the glass as retainers are removed to prevent a sudden drop. After removal, we re-vacuum the cavity, address any damaged molding, and prep the opening for installation. Most mobile replacements take about 30–45 minutes for the swap, followed by adhesive cure time before safe drive-away.
Prep the Pinchweld and Bond Area: Corrosion Checks, Primers, and Adhesion Readiness
A clean, long-lasting quarter window replacement on your Mitsubishi I-Miev starts with bond prep, not the new glass. For bonded quarter glass, the pinchweld (the metal flange around the opening) and the glass bond band must be stable and clean so urethane can fully adhere. At Bang AutoGlass, we begin with a corrosion and coating check for rust, bubbling paint, exposed metal, and prior repair residue that can weaken the seal and cause leaks. We preserve factory E-coat and sound paint whenever possible, then trim the old urethane down to a thin, uniform base layer so fresh urethane can bond to a consistent substrate. If any bare metal is exposed from corrosion cleanup or a cutting nick, we treat it with the correct refinish/body primer per adhesive and refinish guidance, and apply pinchweld primer when the urethane system requires it. On the glass side, we clean the bond area and use the appropriate activator or glass/frit primer as specified to promote adhesion and UV protection at the bond line. Contamination control is strict: no silicone products, no oily fingerprints, and no skipped flash times. We dry-fit the quarter glass to confirm alignment, reveal, and trim engagement, then mask adjacent paint for a crisp finished edge. This prep prevents water intrusion and supports an OEM-style seal—often completed at your location by our mobile auto glass team.
Urethane Bonding and Minimum Drive-Away Time for Mitsubishi I-Miev: SDAT Factors You Must Follow
Urethane bonding is the step that decides whether your Mitsubishi I-Miev quarter window replacement stays quiet and watertight or develops leaks and wind noise. Bang AutoGlass uses automotive-grade urethane and applies a continuous, properly sized bead to maintain correct stand-off, seat depth, and support for surrounding moldings. Corners and transitions are treated carefully because thin spots can become leak paths. We set the quarter glass on its locators, align it to body lines, and confirm uniform contact around the perimeter without over-compressing the bead. The glass is then stabilized so it cannot shift while curing begins. Safe Drive-Away Time (SDAT) is mandatory and depends on the specific urethane system plus ambient temperature and relative humidity. Cooler, drier conditions typically slow cure, while warmer, more humid air generally accelerates it, which is why professional adhesive systems publish SDAT procedures and charts. As our baseline standard, we require at least one full hour before your Mitsubishi I-Miev is considered safe to drive, even though the install often takes about 30–45 minutes. During early cure, avoid door slams, aggressive window operation, and rough roads that flex the body opening. For best results, postpone high-pressure washing for 24–48 hours and keep the bond line undisturbed. Need convenience? Our mobile auto glass service comes to you, and we work with all insurance companies when comprehensive coverage applies.
Final Quality Checks: Leak Test, Wind Noise, Trim Fit, and Documentation for Mitsubishi I-Miev
Before we return your Mitsubishi I-Miev, we complete quality control to confirm the quarter window replacement looks right and seals right. We start with a full visual inspection inside and outside: the quarter glass should be centered, the reveal lines should match the opposite side, and molding or encapsulation must sit flush with no corner lifts, gaps, or uneven edges. We verify urethane contact and ensure trim can seat properly without stress. Next, we confirm interior trim fitment and clip engagement so you do not inherit future buzzes, rattles, or loose panels in the quarter or cargo area. Leak prevention is validated with a controlled water test: a steady hose stream along the perimeter while we observe the interior edge and quarter cavity for moisture. If wind noise is a concern, we check perimeter contact points and trim alignment, since small edge separations can whistle at speed. We then clean the glass, remove protective tape, and ensure surrounding paint and trim are left clean and free of residue. To close out, we document part verification, DOT markings, installation notes, and aftercare, including the minimum one-hour safe drive-away time and avoiding high-pressure washes for 24–48 hours. Your paperwork reflects our lifetime workmanship warranty, and if you are filing a claim we can assist with any insurer when comprehensive coverage applies. The result is a Mitsubishi I-Miev quarter window replacement that is verified, documented, and ready for normal use—often completed at your location by our mobile auto glass team.
Services
Service Areas
Quarter Window Replacement for Mitsubishi I-Miev: Step-by-Step From Cleanup to Drive-Away Time
Cleanup After Quarter Window Breakage on Mitsubishi I-Miev: Safe Glass Removal and Interior Protection
When a quarter window breaks on your Mitsubishi I-Miev, the quickest way to create lingering problems is rushing cleanup. Quarter glass is tempered, so it shatters into small “pebbles” that hide in carpet, seat tracks, door pockets, and trim seams. Treat every fragment as a safety issue. Start with protection: cut-resistant gloves and eye protection, and keep kids and pets away. Lift out larger pieces from the frame and lower sill—never press down on the pile. Scoop with a dustpan or stiff cardboard, then vacuum with a hose and crevice tool, working from trim down through seats, carpet, floor mats, and the cargo area. Avoid hard sweeping that pushes fines deeper. Finish upholstery with wide tape or a lint roller to lift tiny shards you cannot see, and wipe hard plastics with a damp microfiber to trap remaining grit. If you need a temporary cover, tape plastic sheeting from the inside using painter’s tape for a tight, weather-resistant seal that won’t pull paint. Then book Bang AutoGlass for mobile quarter window replacement: we arrive with the right quarter glass, perform a final interior glass sweep, and restore your Mitsubishi I-Miev to a safe, weather-tight daily driver—often as soon as next day.
Verify the Correct Quarter Glass for Mitsubishi I-Miev: Fixed vs Pop-Out, Tint Match, and DOT Markings
Quarter window replacement only seems simple until the wrong part arrives. For your Mitsubishi I-Miev, we verify fitment before any adhesive is mixed so there are no surprises at install time. We confirm the quarter glass design—fixed bonded glass versus a pop-out/vent unit—and double-check mounting details such as studs, locator pins, and whether molding is pre-attached (encapsulated) or transferred. Those features determine seating depth, exterior reveal lines, and whether interior trim clips in without stress. Next we match appearance: clear or privacy-tinted glass, shade consistency, and how existing window film affects the final tone. We also inspect compliance markings on the glass “bug,” including DOT code, safety identifiers, and the proper AS rating for quarter glass. On some packages, quarter glass includes embedded antenna elements; when applicable, we confirm compatibility. This verification prevents common outcomes like wind noise, slow leaks, or molding that won’t sit flush. The goal is an OEM-style Mitsubishi I-Miev quarter window replacement that fits right the first time, and if comprehensive coverage applies, Bang AutoGlass can coordinate with your insurance company and streamline paperwork.
Remove Trim and Old Glass: Mitsubishi I-Miev Quarter Window Replacement Disassembly Checklist
Quarter window replacement on a Mitsubishi I-Miev depends on controlled access: remove only what’s necessary, protect painted edges, and keep clips intact so the car goes back together without rattles. We start by stabilizing the work area—powering down accessories, opening another door or window to reduce pressure changes, and masking adjacent paint, weatherstrips, and trim. From inside the vehicle, we move the minimum panels needed (often a rear seat bolster, quarter trim, and cargo-side panels), using non-marring tools and organizing hardware so every fastener returns to its original location. We work carefully around seatbelt anchors and curtain airbag zones to avoid damage and warning lights. Release method depends on the Mitsubishi I-Miev design: bonded glass is separated by cutting the urethane bead cleanly without gouging the pinchweld or bending the flange; bolt-in or framed styles require supporting the glass as retainers are removed to prevent a sudden drop. After removal, we re-vacuum the cavity, address any damaged molding, and prep the opening for installation. Most mobile replacements take about 30–45 minutes for the swap, followed by adhesive cure time before safe drive-away.
Prep the Pinchweld and Bond Area: Corrosion Checks, Primers, and Adhesion Readiness
A clean, long-lasting quarter window replacement on your Mitsubishi I-Miev starts with bond prep, not the new glass. For bonded quarter glass, the pinchweld (the metal flange around the opening) and the glass bond band must be stable and clean so urethane can fully adhere. At Bang AutoGlass, we begin with a corrosion and coating check for rust, bubbling paint, exposed metal, and prior repair residue that can weaken the seal and cause leaks. We preserve factory E-coat and sound paint whenever possible, then trim the old urethane down to a thin, uniform base layer so fresh urethane can bond to a consistent substrate. If any bare metal is exposed from corrosion cleanup or a cutting nick, we treat it with the correct refinish/body primer per adhesive and refinish guidance, and apply pinchweld primer when the urethane system requires it. On the glass side, we clean the bond area and use the appropriate activator or glass/frit primer as specified to promote adhesion and UV protection at the bond line. Contamination control is strict: no silicone products, no oily fingerprints, and no skipped flash times. We dry-fit the quarter glass to confirm alignment, reveal, and trim engagement, then mask adjacent paint for a crisp finished edge. This prep prevents water intrusion and supports an OEM-style seal—often completed at your location by our mobile auto glass team.
Urethane Bonding and Minimum Drive-Away Time for Mitsubishi I-Miev: SDAT Factors You Must Follow
Urethane bonding is the step that decides whether your Mitsubishi I-Miev quarter window replacement stays quiet and watertight or develops leaks and wind noise. Bang AutoGlass uses automotive-grade urethane and applies a continuous, properly sized bead to maintain correct stand-off, seat depth, and support for surrounding moldings. Corners and transitions are treated carefully because thin spots can become leak paths. We set the quarter glass on its locators, align it to body lines, and confirm uniform contact around the perimeter without over-compressing the bead. The glass is then stabilized so it cannot shift while curing begins. Safe Drive-Away Time (SDAT) is mandatory and depends on the specific urethane system plus ambient temperature and relative humidity. Cooler, drier conditions typically slow cure, while warmer, more humid air generally accelerates it, which is why professional adhesive systems publish SDAT procedures and charts. As our baseline standard, we require at least one full hour before your Mitsubishi I-Miev is considered safe to drive, even though the install often takes about 30–45 minutes. During early cure, avoid door slams, aggressive window operation, and rough roads that flex the body opening. For best results, postpone high-pressure washing for 24–48 hours and keep the bond line undisturbed. Need convenience? Our mobile auto glass service comes to you, and we work with all insurance companies when comprehensive coverage applies.
Final Quality Checks: Leak Test, Wind Noise, Trim Fit, and Documentation for Mitsubishi I-Miev
Before we return your Mitsubishi I-Miev, we complete quality control to confirm the quarter window replacement looks right and seals right. We start with a full visual inspection inside and outside: the quarter glass should be centered, the reveal lines should match the opposite side, and molding or encapsulation must sit flush with no corner lifts, gaps, or uneven edges. We verify urethane contact and ensure trim can seat properly without stress. Next, we confirm interior trim fitment and clip engagement so you do not inherit future buzzes, rattles, or loose panels in the quarter or cargo area. Leak prevention is validated with a controlled water test: a steady hose stream along the perimeter while we observe the interior edge and quarter cavity for moisture. If wind noise is a concern, we check perimeter contact points and trim alignment, since small edge separations can whistle at speed. We then clean the glass, remove protective tape, and ensure surrounding paint and trim are left clean and free of residue. To close out, we document part verification, DOT markings, installation notes, and aftercare, including the minimum one-hour safe drive-away time and avoiding high-pressure washes for 24–48 hours. Your paperwork reflects our lifetime workmanship warranty, and if you are filing a claim we can assist with any insurer when comprehensive coverage applies. The result is a Mitsubishi I-Miev quarter window replacement that is verified, documented, and ready for normal use—often completed at your location by our mobile auto glass team.
Enjoy More Relevant Blogs
Fixed Quarter Window vs Vent Glass on Mitsubishi I-Miev: Ordering the Correct Replacement
Fixed quarter window vs vent glass on Mitsubishi I-Miev: how to identify yours and order the correct replacement for fit, sealing, and safety—read this now.
How to Schedule Mobile Quarter Glass Replacement for Mitsubishi I-Miev
Need mobile quarter glass replacement for Mitsubishi I-Miev? Follow our scheduling checklist, photos to take, timing, and on-site tips to restore security.
Stop Leaks and Wind Noise: What Proper Mitsubishi I-Miev Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Mitsubishi I-Miev quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
How Much Does Mitsubishi I-Miev Quarter Panel Glass Replacement Cost? Insurance Deductibles, Estimates, and Ways to Save
Cost to replace Mitsubishi I-Miev quarter panel glass: key price factors, OEM vs aftermarket options, insurance deductibles, estimates, and smart ways to save.
Tint & Privacy Glass Match Guide: Mitsubishi I-Miev Quarter Glass Replacement Done Right
Tint and privacy match guide for Mitsubishi I-Miev quarter glass replacement—how to match shade, markings, and fit so the new glass looks factory-perfect.
OEM-Quality Quarter Glass Replacement for Mitsubishi I-Miev: Fit, Trim, and Weather-Seal Checklist
OEM-quality quarter glass replacement for Mitsubishi I-Miev: fit, trim, and weather-seal checklist for correct install, leak prevention, and clean finish.
After a Break-In: Mitsubishi I-Miev Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Mitsubishi I-Miev, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
How Long After Mitsubishi I-Miev Quarter Panel Glass Replacement Can You Drive or Wash the Car? Urethane Cure-Time Rules
After Mitsubishi I-Miev quarter panel glass replacement, learn safe drive-away time, when to wash, and urethane cure rules that help prevent leaks and wind noise.
Safety Standards Explained: DOT Markings and FMVSS 205 for Mitsubishi I-Miev Quarter Glass Replacement
DOT markings and FMVSS 205 explained for Mitsubishi I-Miev quarter glass replacement—how to verify safety markings and choose compliant OEM-quality glass.
Bang AutoGlass
Quick Links
Services
Service Areas
Auto Glass Services by Makes & Models
Bang AutoGlass
Quick Links
Services
Service Areas
Auto Glass Services by Makes & Models
Bang AutoGlass
Quick Links
Services
Service Areas
Auto Glass Services by Makes & Models