Services
Service Areas
Shattered Back Window on Chevrolet 2500 Crew Cab: A Step-by-Step Rear Glass Replacement Plan
Immediate Steps After Rear Glass Breakage on Chevrolet 2500 Crew Cab: Safety, Visibility, and Securing the Vehicle
When the back window on your Chevrolet 2500 Crew Cab shatters, handle the first minutes calmly to prevent injury and keep the vehicle secure. If it happens on the road, reduce speed, switch on hazards, and pull over somewhere safe and bright. Tempered rear glass breaks into many small pieces that still cut and irritate, so keep kids and pets away and avoid rubbing your eyes. With gloves and eye protection, clear only loose fragments that could fall into the cabin or obstruct your mirror; leave embedded glass for the installer. Next, limit water intrusion and deter theft. Remove valuables and cover the opening from the outside with plastic sheeting or a heavy-duty bag, sealing the edges with painter's tape or other low-tack tape. Avoid slamming doors or the hatch because pressure changes can knock more pieces loose. Photograph the damage for your insurance claim, since rear glass is often covered under comprehensive coverage. Bang AutoGlass can complete a mobile Chevrolet 2500 Crew Cab back glass replacement, often as soon as next day. Installation typically takes 30-45 minutes, then the urethane needs at least 1 hour of cure time before safe drive-away. Every replacement is backed by our lifetime workmanship warranty.
Cleanup Plan: Removing Shards, Vacuuming the Cabin, and Protecting Trim and Upholstery
With the rear window blown out, your Chevrolet 2500 Crew Cab can have glass on the rear deck, in seat seams, and in the trunk/cargo area. Clean in stages so you do not push shards deeper into carpet or upholstery. Start with PPE--safety glasses, thick gloves, and closed-toe shoes--and keep passengers away. If possible, cover seats and the cargo floor with plastic so loose fragments land on a disposable surface. Remove large pieces first. Pick chunks out of the window frame and off the rear deck and place them into a rigid container. Avoid sweeping across fabric; it drives glass into the weave. Next, vacuum slowly with a crevice nozzle using overlapping passes. Work top-down: headliner edge, trim gaps, rear deck, seat seams, floor mats, carpet, and then the trunk well. After the first vacuum, use painter's tape or a lint roller to lift fine "glass sand" from fabric and tight corners; repeat until the tape comes back clean. Finish by wiping plastics with a slightly damp microfiber towel to avoid hazing trim. If Bang AutoGlass is coming to you for mobile rear glass replacement, keep the opening accessible and the cargo area clear so installation stays clean.
Confirm the Correct Rear Glass for Chevrolet 2500 Crew Cab: Defroster Grid, Antenna Lines, Tint, and DOT Markings
Ordering the rear glass for a Chevrolet 2500 Crew Cab starts with matching the vehicle's options. Begin with the rear defroster: most Chevrolet 2500 Crew Cab back windows use a printed heating grid, and the replacement must match the layout and have the connector tabs so it plugs into the factory harness. Also confirm antenna features. Many vehicles integrate AM/FM, GPS, or cellular traces into the rear window; if your reception depended on the original glass, you need an antenna-equipped replacement. Next, match tint and privacy shading. Rear glass may be clear, lightly tinted, or privacy glass. Matching shade matters for appearance, heat rejection, and (by state) compliance. If your Chevrolet 2500 Crew Cab had aftermarket tint film, confirm whether film was applied over clear glass or whether the vehicle used privacy glass so you do not end up too light or too dark after rear windshield replacement. Finally, verify markings and fit. Automotive glass carries DOT identification and AS markings (AS2/AS3 are common on rear and side glass and can indicate tinted variations). VIN validation and the part number help ensure proper curvature, tempered-glass performance, and an insurance-friendly repair. Bang AutoGlass verifies these details before dispatching our mobile team, and every install is backed by our lifetime workmanship warranty.
Removal and Prep Steps: Interior Protection, Pinchweld Inspection, and Bond Surface Readiness
A quality rear glass replacement starts with careful removal and prep for your Chevrolet 2500 Crew Cab. Bang AutoGlass covers the seats, rear deck, and cargo area, then removes trim, clips, and moldings needed to access the opening without scuffing interior panels. We clear tempered-glass fragments, manage rear defroster/antenna connectors, and cut the existing urethane with controlled tools so the vehicle aperture stays intact. Next we inspect the pinchweld-the metal bonding flange the urethane bonds to. Best practice is to remove most of the old urethane while leaving a thin, uniform base layer (about 1-2 mm) so new urethane bonds to cured urethane instead of bare metal. If we find scratches through paint, corrosion, or prior bodywork issues, we correct and prime/seal exposed metal because rust under the bond line is a common cause of leaks and adhesion loss. Finally, we dry-fit the replacement back glass for your Chevrolet 2500 Crew Cab, confirm spacers and molding condition, clean the frit and aperture, and apply the proper primers/activators with correct flash times. With surfaces ready, we set the glass with even pressure for a consistent perimeter seal-mobile, next-day rear window replacement backed by our lifetime workmanship warranty.
Urethane Bonding and Minimum Drive-Away Time for Chevrolet 2500 Crew Cab: What Controls Safe Release
The difference between "installed" and "safe" after a Chevrolet 2500 Crew Cab rear window replacement is urethane curing. Auto glass urethane is a moisture-curing polyurethane adhesive, and each system includes Safe Drive-Away Time (SDAT) guidance tied to minimum bond strength. SDAT is controlled by the adhesive used, proper surface prep, bead size/shape, and environmental conditions like temperature and humidity. Cold or very dry air can slow cure; warm, humid conditions typically speed it up. Open-time limits also matter-urethane must be applied and the glass set within the specified window for proper wet-out and adhesion. Prep details directly affect the bond: clean, contaminant-free surfaces; correct primer/activator application; and required flash times. The urethane bead must be continuous and uniform so it compresses evenly around the perimeter, preventing thin spots that can leak or whistle. Exposed metal on the pinchweld must be protected and primed because corrosion under the bond line is a common long-term failure point. At Bang AutoGlass, most Chevrolet 2500 Crew Cab back glass replacements take about 30-45 minutes on site, then we require at least 1 hour before safe drive-away. Drive gently, avoid slamming doors, and skip automated car washes; we'll extend cure time if conditions warrant it, backed by our lifetime workmanship warranty and help with comprehensive coverage claims.
Post-Install Verification: Defroster/Antenna Testing, Leak & Wind Noise Checks, and Documentation
After your Chevrolet 2500 Crew Cab rear window replacement, post-install verification turns new back glass into a reliable, long-term repair. Bang AutoGlass finishes every rear windshield replacement by checking electrical features, sealing, and documentation-especially when an insurance claim under comprehensive coverage is involved. First, we reconnect and secure the rear defroster tabs and any in-glass antenna leads, ensuring connectors are fully seated and wiring is strain-relieved so liftgate or trunk movement won't tug them loose. We can confirm basic operation so you don't discover a weak connection or poor reception later. Next, we validate the seal and noise performance: we inspect molding alignment and the reveal line for even spacing, then perform a controlled perimeter water test to confirm there are no leaks. If wind noise is a concern, a short road test is the most realistic way to replicate airflow and confirm proper set-down. Finally, we document the job with an invoice, warranty record, and notes on glass features for your Chevrolet 2500 Crew Cab (tint, defroster grid, antenna integration, and DOT markings). Observe at least a 1-hour safe drive-away time and avoid automated car washes for the first day to protect the fresh urethane seal.
Services
Service Areas
Shattered Back Window on Chevrolet 2500 Crew Cab: A Step-by-Step Rear Glass Replacement Plan
Immediate Steps After Rear Glass Breakage on Chevrolet 2500 Crew Cab: Safety, Visibility, and Securing the Vehicle
When the back window on your Chevrolet 2500 Crew Cab shatters, handle the first minutes calmly to prevent injury and keep the vehicle secure. If it happens on the road, reduce speed, switch on hazards, and pull over somewhere safe and bright. Tempered rear glass breaks into many small pieces that still cut and irritate, so keep kids and pets away and avoid rubbing your eyes. With gloves and eye protection, clear only loose fragments that could fall into the cabin or obstruct your mirror; leave embedded glass for the installer. Next, limit water intrusion and deter theft. Remove valuables and cover the opening from the outside with plastic sheeting or a heavy-duty bag, sealing the edges with painter's tape or other low-tack tape. Avoid slamming doors or the hatch because pressure changes can knock more pieces loose. Photograph the damage for your insurance claim, since rear glass is often covered under comprehensive coverage. Bang AutoGlass can complete a mobile Chevrolet 2500 Crew Cab back glass replacement, often as soon as next day. Installation typically takes 30-45 minutes, then the urethane needs at least 1 hour of cure time before safe drive-away. Every replacement is backed by our lifetime workmanship warranty.
Cleanup Plan: Removing Shards, Vacuuming the Cabin, and Protecting Trim and Upholstery
With the rear window blown out, your Chevrolet 2500 Crew Cab can have glass on the rear deck, in seat seams, and in the trunk/cargo area. Clean in stages so you do not push shards deeper into carpet or upholstery. Start with PPE--safety glasses, thick gloves, and closed-toe shoes--and keep passengers away. If possible, cover seats and the cargo floor with plastic so loose fragments land on a disposable surface. Remove large pieces first. Pick chunks out of the window frame and off the rear deck and place them into a rigid container. Avoid sweeping across fabric; it drives glass into the weave. Next, vacuum slowly with a crevice nozzle using overlapping passes. Work top-down: headliner edge, trim gaps, rear deck, seat seams, floor mats, carpet, and then the trunk well. After the first vacuum, use painter's tape or a lint roller to lift fine "glass sand" from fabric and tight corners; repeat until the tape comes back clean. Finish by wiping plastics with a slightly damp microfiber towel to avoid hazing trim. If Bang AutoGlass is coming to you for mobile rear glass replacement, keep the opening accessible and the cargo area clear so installation stays clean.
Confirm the Correct Rear Glass for Chevrolet 2500 Crew Cab: Defroster Grid, Antenna Lines, Tint, and DOT Markings
Ordering the rear glass for a Chevrolet 2500 Crew Cab starts with matching the vehicle's options. Begin with the rear defroster: most Chevrolet 2500 Crew Cab back windows use a printed heating grid, and the replacement must match the layout and have the connector tabs so it plugs into the factory harness. Also confirm antenna features. Many vehicles integrate AM/FM, GPS, or cellular traces into the rear window; if your reception depended on the original glass, you need an antenna-equipped replacement. Next, match tint and privacy shading. Rear glass may be clear, lightly tinted, or privacy glass. Matching shade matters for appearance, heat rejection, and (by state) compliance. If your Chevrolet 2500 Crew Cab had aftermarket tint film, confirm whether film was applied over clear glass or whether the vehicle used privacy glass so you do not end up too light or too dark after rear windshield replacement. Finally, verify markings and fit. Automotive glass carries DOT identification and AS markings (AS2/AS3 are common on rear and side glass and can indicate tinted variations). VIN validation and the part number help ensure proper curvature, tempered-glass performance, and an insurance-friendly repair. Bang AutoGlass verifies these details before dispatching our mobile team, and every install is backed by our lifetime workmanship warranty.
Removal and Prep Steps: Interior Protection, Pinchweld Inspection, and Bond Surface Readiness
A quality rear glass replacement starts with careful removal and prep for your Chevrolet 2500 Crew Cab. Bang AutoGlass covers the seats, rear deck, and cargo area, then removes trim, clips, and moldings needed to access the opening without scuffing interior panels. We clear tempered-glass fragments, manage rear defroster/antenna connectors, and cut the existing urethane with controlled tools so the vehicle aperture stays intact. Next we inspect the pinchweld-the metal bonding flange the urethane bonds to. Best practice is to remove most of the old urethane while leaving a thin, uniform base layer (about 1-2 mm) so new urethane bonds to cured urethane instead of bare metal. If we find scratches through paint, corrosion, or prior bodywork issues, we correct and prime/seal exposed metal because rust under the bond line is a common cause of leaks and adhesion loss. Finally, we dry-fit the replacement back glass for your Chevrolet 2500 Crew Cab, confirm spacers and molding condition, clean the frit and aperture, and apply the proper primers/activators with correct flash times. With surfaces ready, we set the glass with even pressure for a consistent perimeter seal-mobile, next-day rear window replacement backed by our lifetime workmanship warranty.
Urethane Bonding and Minimum Drive-Away Time for Chevrolet 2500 Crew Cab: What Controls Safe Release
The difference between "installed" and "safe" after a Chevrolet 2500 Crew Cab rear window replacement is urethane curing. Auto glass urethane is a moisture-curing polyurethane adhesive, and each system includes Safe Drive-Away Time (SDAT) guidance tied to minimum bond strength. SDAT is controlled by the adhesive used, proper surface prep, bead size/shape, and environmental conditions like temperature and humidity. Cold or very dry air can slow cure; warm, humid conditions typically speed it up. Open-time limits also matter-urethane must be applied and the glass set within the specified window for proper wet-out and adhesion. Prep details directly affect the bond: clean, contaminant-free surfaces; correct primer/activator application; and required flash times. The urethane bead must be continuous and uniform so it compresses evenly around the perimeter, preventing thin spots that can leak or whistle. Exposed metal on the pinchweld must be protected and primed because corrosion under the bond line is a common long-term failure point. At Bang AutoGlass, most Chevrolet 2500 Crew Cab back glass replacements take about 30-45 minutes on site, then we require at least 1 hour before safe drive-away. Drive gently, avoid slamming doors, and skip automated car washes; we'll extend cure time if conditions warrant it, backed by our lifetime workmanship warranty and help with comprehensive coverage claims.
Post-Install Verification: Defroster/Antenna Testing, Leak & Wind Noise Checks, and Documentation
After your Chevrolet 2500 Crew Cab rear window replacement, post-install verification turns new back glass into a reliable, long-term repair. Bang AutoGlass finishes every rear windshield replacement by checking electrical features, sealing, and documentation-especially when an insurance claim under comprehensive coverage is involved. First, we reconnect and secure the rear defroster tabs and any in-glass antenna leads, ensuring connectors are fully seated and wiring is strain-relieved so liftgate or trunk movement won't tug them loose. We can confirm basic operation so you don't discover a weak connection or poor reception later. Next, we validate the seal and noise performance: we inspect molding alignment and the reveal line for even spacing, then perform a controlled perimeter water test to confirm there are no leaks. If wind noise is a concern, a short road test is the most realistic way to replicate airflow and confirm proper set-down. Finally, we document the job with an invoice, warranty record, and notes on glass features for your Chevrolet 2500 Crew Cab (tint, defroster grid, antenna integration, and DOT markings). Observe at least a 1-hour safe drive-away time and avoid automated car washes for the first day to protect the fresh urethane seal.
Services
Service Areas
Shattered Back Window on Chevrolet 2500 Crew Cab: A Step-by-Step Rear Glass Replacement Plan
Immediate Steps After Rear Glass Breakage on Chevrolet 2500 Crew Cab: Safety, Visibility, and Securing the Vehicle
When the back window on your Chevrolet 2500 Crew Cab shatters, handle the first minutes calmly to prevent injury and keep the vehicle secure. If it happens on the road, reduce speed, switch on hazards, and pull over somewhere safe and bright. Tempered rear glass breaks into many small pieces that still cut and irritate, so keep kids and pets away and avoid rubbing your eyes. With gloves and eye protection, clear only loose fragments that could fall into the cabin or obstruct your mirror; leave embedded glass for the installer. Next, limit water intrusion and deter theft. Remove valuables and cover the opening from the outside with plastic sheeting or a heavy-duty bag, sealing the edges with painter's tape or other low-tack tape. Avoid slamming doors or the hatch because pressure changes can knock more pieces loose. Photograph the damage for your insurance claim, since rear glass is often covered under comprehensive coverage. Bang AutoGlass can complete a mobile Chevrolet 2500 Crew Cab back glass replacement, often as soon as next day. Installation typically takes 30-45 minutes, then the urethane needs at least 1 hour of cure time before safe drive-away. Every replacement is backed by our lifetime workmanship warranty.
Cleanup Plan: Removing Shards, Vacuuming the Cabin, and Protecting Trim and Upholstery
With the rear window blown out, your Chevrolet 2500 Crew Cab can have glass on the rear deck, in seat seams, and in the trunk/cargo area. Clean in stages so you do not push shards deeper into carpet or upholstery. Start with PPE--safety glasses, thick gloves, and closed-toe shoes--and keep passengers away. If possible, cover seats and the cargo floor with plastic so loose fragments land on a disposable surface. Remove large pieces first. Pick chunks out of the window frame and off the rear deck and place them into a rigid container. Avoid sweeping across fabric; it drives glass into the weave. Next, vacuum slowly with a crevice nozzle using overlapping passes. Work top-down: headliner edge, trim gaps, rear deck, seat seams, floor mats, carpet, and then the trunk well. After the first vacuum, use painter's tape or a lint roller to lift fine "glass sand" from fabric and tight corners; repeat until the tape comes back clean. Finish by wiping plastics with a slightly damp microfiber towel to avoid hazing trim. If Bang AutoGlass is coming to you for mobile rear glass replacement, keep the opening accessible and the cargo area clear so installation stays clean.
Confirm the Correct Rear Glass for Chevrolet 2500 Crew Cab: Defroster Grid, Antenna Lines, Tint, and DOT Markings
Ordering the rear glass for a Chevrolet 2500 Crew Cab starts with matching the vehicle's options. Begin with the rear defroster: most Chevrolet 2500 Crew Cab back windows use a printed heating grid, and the replacement must match the layout and have the connector tabs so it plugs into the factory harness. Also confirm antenna features. Many vehicles integrate AM/FM, GPS, or cellular traces into the rear window; if your reception depended on the original glass, you need an antenna-equipped replacement. Next, match tint and privacy shading. Rear glass may be clear, lightly tinted, or privacy glass. Matching shade matters for appearance, heat rejection, and (by state) compliance. If your Chevrolet 2500 Crew Cab had aftermarket tint film, confirm whether film was applied over clear glass or whether the vehicle used privacy glass so you do not end up too light or too dark after rear windshield replacement. Finally, verify markings and fit. Automotive glass carries DOT identification and AS markings (AS2/AS3 are common on rear and side glass and can indicate tinted variations). VIN validation and the part number help ensure proper curvature, tempered-glass performance, and an insurance-friendly repair. Bang AutoGlass verifies these details before dispatching our mobile team, and every install is backed by our lifetime workmanship warranty.
Removal and Prep Steps: Interior Protection, Pinchweld Inspection, and Bond Surface Readiness
A quality rear glass replacement starts with careful removal and prep for your Chevrolet 2500 Crew Cab. Bang AutoGlass covers the seats, rear deck, and cargo area, then removes trim, clips, and moldings needed to access the opening without scuffing interior panels. We clear tempered-glass fragments, manage rear defroster/antenna connectors, and cut the existing urethane with controlled tools so the vehicle aperture stays intact. Next we inspect the pinchweld-the metal bonding flange the urethane bonds to. Best practice is to remove most of the old urethane while leaving a thin, uniform base layer (about 1-2 mm) so new urethane bonds to cured urethane instead of bare metal. If we find scratches through paint, corrosion, or prior bodywork issues, we correct and prime/seal exposed metal because rust under the bond line is a common cause of leaks and adhesion loss. Finally, we dry-fit the replacement back glass for your Chevrolet 2500 Crew Cab, confirm spacers and molding condition, clean the frit and aperture, and apply the proper primers/activators with correct flash times. With surfaces ready, we set the glass with even pressure for a consistent perimeter seal-mobile, next-day rear window replacement backed by our lifetime workmanship warranty.
Urethane Bonding and Minimum Drive-Away Time for Chevrolet 2500 Crew Cab: What Controls Safe Release
The difference between "installed" and "safe" after a Chevrolet 2500 Crew Cab rear window replacement is urethane curing. Auto glass urethane is a moisture-curing polyurethane adhesive, and each system includes Safe Drive-Away Time (SDAT) guidance tied to minimum bond strength. SDAT is controlled by the adhesive used, proper surface prep, bead size/shape, and environmental conditions like temperature and humidity. Cold or very dry air can slow cure; warm, humid conditions typically speed it up. Open-time limits also matter-urethane must be applied and the glass set within the specified window for proper wet-out and adhesion. Prep details directly affect the bond: clean, contaminant-free surfaces; correct primer/activator application; and required flash times. The urethane bead must be continuous and uniform so it compresses evenly around the perimeter, preventing thin spots that can leak or whistle. Exposed metal on the pinchweld must be protected and primed because corrosion under the bond line is a common long-term failure point. At Bang AutoGlass, most Chevrolet 2500 Crew Cab back glass replacements take about 30-45 minutes on site, then we require at least 1 hour before safe drive-away. Drive gently, avoid slamming doors, and skip automated car washes; we'll extend cure time if conditions warrant it, backed by our lifetime workmanship warranty and help with comprehensive coverage claims.
Post-Install Verification: Defroster/Antenna Testing, Leak & Wind Noise Checks, and Documentation
After your Chevrolet 2500 Crew Cab rear window replacement, post-install verification turns new back glass into a reliable, long-term repair. Bang AutoGlass finishes every rear windshield replacement by checking electrical features, sealing, and documentation-especially when an insurance claim under comprehensive coverage is involved. First, we reconnect and secure the rear defroster tabs and any in-glass antenna leads, ensuring connectors are fully seated and wiring is strain-relieved so liftgate or trunk movement won't tug them loose. We can confirm basic operation so you don't discover a weak connection or poor reception later. Next, we validate the seal and noise performance: we inspect molding alignment and the reveal line for even spacing, then perform a controlled perimeter water test to confirm there are no leaks. If wind noise is a concern, a short road test is the most realistic way to replicate airflow and confirm proper set-down. Finally, we document the job with an invoice, warranty record, and notes on glass features for your Chevrolet 2500 Crew Cab (tint, defroster grid, antenna integration, and DOT markings). Observe at least a 1-hour safe drive-away time and avoid automated car washes for the first day to protect the fresh urethane seal.
Enjoy More Relevant Blogs
Post-Install Checks for Chevrolet 2500 Crew Cab: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Chevrolet 2500 Crew Cab: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Tempered Safety Rear Glass Replacement for Chevrolet 2500 Crew Cab: Understanding DOT Markings and FMVSS 205
Need Chevrolet 2500 Crew Cab rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Back Glass Replacement on Chevrolet 2500 Crew Cab: Defroster Tabs, Antenna Lines, and Connector Reattachment Basics
Back glass replacement on Chevrolet 2500 Crew Cab: defroster tabs, antenna lines, and connectors explained, plus install tips to avoid damage and rework safely.
Rear Glass Replacement for Chevrolet 2500 Crew Cab: What to Expect During Install and Aftercare
Rear glass replacement for Chevrolet 2500 Crew Cab: what happens during install, defroster and tint considerations, cure time, and aftercare to prevent leaks long-term.
How Much Does Rear Glass Replacement Cost for Chevrolet 2500 Crew Cab? Pricing Factors, OEM vs Aftermarket, and Insurance Deductibles
Estimate Chevrolet 2500 Crew Cab rear glass replacement cost. Compare OEM vs aftermarket, labor factors, insurance deductibles, and ways to save. Request a quote.
Rear Defroster Not Working on Chevrolet 2500 Crew Cab? When Rear Glass Replacement Makes More Sense Than Repair
Rear defroster not working on your Chevrolet 2500 Crew Cab? Learn common causes, when repair fails, and when rear glass replacement is the smarter fix for winter.
OEM-Quality Rear Glass Replacement for Chevrolet 2500 Crew Cab: Defroster Grid and Tint-Match Checklist
OEM-quality rear glass replacement for Chevrolet 2500 Crew Cab: defroster grid and tint-match checklist, plus install tips to avoid callbacks—schedule service.
How to Schedule Mobile Rear Glass Replacement for Chevrolet 2500 Crew Cab
Schedule mobile rear glass replacement for your Chevrolet 2500 Crew Cab in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
How Long Does Rear Glass Replacement Take on Chevrolet 2500 Crew Cab? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How long is Chevrolet 2500 Crew Cab rear glass replacement? Get install time, urethane cure guidelines, and drive-away timing after service. Plan your visit today.
Bang AutoGlass
Quick Links
Services
Service Areas
Auto Glass Services by Makes & Models
Bang AutoGlass
Quick Links
Services
Service Areas
Auto Glass Services by Makes & Models
Bang AutoGlass
Quick Links
Services
Service Areas
Auto Glass Services by Makes & Models